PellKing 5-Suction Cup Car Camera Mount Review: Cinematic Rolling Shots Without a Full Camera Rig

Five-Suction Cup Hybrid Mounting System

The PellKing mounting assembly consists of two interconnected sections.

Triple-suction base: The primary mounting platform uses three suction cups to establish a stable attachment to a clean, smooth, nonporous surface.

Dual-suction stabilizing arm: Two additional suction cups provide support for the extended mounting structure.

Together, these components create a five-point mounting arrangement that may help limit unwanted movement compared with an inadequately supported single-arm setup.

However, five suction cups do not automatically guarantee greater retention than a properly engineered professional mounting system. The strength of the entire assembly depends on its weakest connection.

One of the most interesting applications of the PellKing camera mount is capturing low-angle vehicle footage.

By positioning a compact camera away from the vehicle body, filmmakers can create dramatic perspectives that resemble low-altitude tracking shots.

These angles emphasize wheel movement, suspension behavior, vehicle styling, and the relationship between the car and its surroundings.

Popular applications include automotive promotional videos, project-car features, controlled-course driving footage, and motorsport productions.

The extended configuration also gives creators more freedom when composing their shots. However, a longer arm can increase leverage and vibration, so careful setup and testing remain essential.

Compatible With DJI Osmo Pocket and GoPro Cameras

The PellKing kit is advertised for use with DJI Osmo Pocket cameras and several GoPro action camera models.

The supplied equipment description specifically identifies the DJI Osmo Pocket 3 bracket and a standard GoPro-style action camera adapter.

Advertised camera compatibility

Compatibility note: Confirm camera-specific adapter requirements, total equipment weight, and gimbal clearance before purchasing. The supplied specifications do not establish a verified load rating for every advertised camera.

Durable Aluminum Construction and Adjustable Positioning

The PellKing camera mounting system combines aluminum-alloy components, reinforced ABS plastic, and silicone suction cups.

These materials are intended to balance structural rigidity with portability.

The articulating locking arms and 360-degree adjustable ball joints make it possible to position the camera at different angles without rebuilding the entire mounting assembly.

This flexibility is especially useful when filming several vehicles at an automotive event.

Creators can reposition the camera for front-quarter, side-profile, or elevated compositions while adapting to different vehicle shapes.

What’s Included With the PellKing Camera Mount?

The advertised package includes the following equipment:

The kit provides several components for configuring different camera positions.

Confirm the exact package contents with the seller before ordering, particularly if a specific camera bracket is essential to your setup.

How to Install the PellKing 5-Suction Cup Mount

Proper installation is critical for any automotive suction cup mounting system.

Step 1: Clean the mounting surface

Remove dust, grease, wax residue, and moisture from the attachment area.

Use only smooth, nonporous surfaces compatible with the suction cups. Avoid textured panels, damaged paint, and curved surfaces that prevent a complete seal.

Step 2: Position the triple-suction base

Place the primary base against the selected mounting surface and engage the suction mechanisms according to the manufacturer’s instructions.

Confirm that every cup has established a complete seal.

Step 3: Attach the dual-suction support arm

Position the secondary support assembly so the arm is adequately supported without placing unnecessary strain on the camera or mounting joints.

Avoid extreme extension angles that increase leverage.

Step 4: Install the camera

Attach the appropriate camera bracket and check all threaded connections, locks, and adapters.

For gimbal cameras, verify that the gimbal can move freely without striking the mounting assembly.

Step 5: Add secondary retention and inspect

Use an appropriately rated safety tether secured to an independent attachment point. The tether should not rely solely on the same suction assembly.

Perform a stationary inspection and test recording before any vehicle movement.

Exterior camera mounting should be limited to appropriate controlled filming environments, with all applicable venue rules and safety requirements followed.

Is the PellKing Mount Good for Automotive YouTube Creators?

For automotive content creators, the biggest attraction is versatility.

Instead of relying on a single interior camera perspective, a configurable suction mounting system can help capture more interesting vehicle details.

For example, a modified Lexus IS300 project video could incorporate stationary exterior close-ups, detailed suspension footage, and controlled-course rolling perspectives.

That variety makes automotive content more engaging and gives editors more useful footage.

Creators interested in automotive upgrades, installation techniques, and enthusiast projects can explore My Pro Street Online for additional DIY guides and automotive features.

For related automotive equipment and replacement components, visit Pro Street Online automotive parts and accessories.

PellKing 5-Suction Cup Mount: Pros and Cons

Final Verdict: Is the PellKing 5-Suction Cup Camera Mount Worth It?

The PellKing 5-Suction Cup Car Mount offers an interesting solution for automotive enthusiasts looking to expand their filming capabilities.

Its combination of multiple suction points, articulating arms, and action-camera compatibility makes it a versatile option for carefully planned automotive shoots.

The design is particularly appealing for creators who want dramatic low-angle perspectives without investing immediately in a large professional camera rig.

However, the manufacturer’s claims of exceptional vibration resistance, high-speed stability, and superior holding power should not be treated as independently verified performance results.

Our assessment: The PellKing system is worth considering for controlled automotive filming where flexible camera placement is important. Buyers should confirm camera compatibility, load limits, and mounting requirements before using it.