Triple Strong Suction Cup Camera Car Mount for Insta360 – 67-Inch Invisible Selfie Stick & 360° Filming Rig

Triple Suction Cup Design With Triangular Support

The camera mount uses three suction cups arranged to create a triangular mounting structure.

The system combines a dual-suction assembly with an additional single suction cup to support the extended camera pole.

This multi-point configuration is intended to distribute mounting loads and limit unwanted movement.

The manufacturer also describes small air filters incorporated into the suction mechanisms to help reduce dust intrusion.

However, suction retention depends on surface condition, equipment weight, temperature, mounting geometry, and aerodynamic forces.

The seller claims the system can remain attached at speeds exceeding 100 mph. That claim has not been independently verified and should not be treated as a safe operating speed. Exterior camera rigs should only be used in appropriate controlled filming environments with verified equipment limits and suitable secondary retention.

67-Inch Aluminum Invisible Selfie Stick

The centerpiece of this mounting kit is its 67-inch (approximately 1.7-meter) telescoping extension pole.

The four-section aluminum-alloy construction uses a twist-and-lock adjustment mechanism, allowing users to extend or retract the pole depending on the desired camera position.

This longer extension offers additional creative flexibility compared with compact action-camera mounts.

Potential applications include elevated vehicle compositions, stationary third-person perspectives, and carefully controlled exterior camera positioning.

Advertised extension pole load capacity

The significant reduction in load capacity at full extension is important.

A longer pole creates additional leverage at the mounting points, especially when exposed to vibration, sudden movement, or wind.

For this reason, the shortest practical extension should be used whenever possible.

Invisible Selfie Stick Technology for Insta360 Cameras

One of the most interesting features of this system is its compatibility with Insta360’s invisible selfie stick effect.

Compatible 360-degree cameras capture overlapping footage from multiple lenses and combine the images through stitching software.

When the selfie stick is positioned within the camera’s stitching blind spot, the software can remove much of the pole from the finished footage.

This creates the appearance of a camera floating above or beside the vehicle.

The seller specifically identifies compatibility with the invisible selfie stick effect on several Insta360 panoramic cameras.

However, actual results depend on camera model, pole alignment, lens positioning, recording mode, and stitching performance.

The invisible effect should not be assumed to work with ordinary single-lens action cameras.

Flexible Mounting With Dual and Single Suction Cup Configurations

The mounting kit includes a dual-suction assembly connected through a U-shaped bracket.

The manufacturer advertises the ability to use the suction cup components together or separately.

The single-cup mounting assembly also provides approximately 180 degrees of front-to-back adjustment using a thumb screw.

This flexibility makes it possible to adapt the equipment to different stationary filming setups.

For example, a compact configuration may be suitable for an interior camera angle, while the complete triple-cup assembly can support a more elaborate stationary exterior perspective.

Always verify the appropriate load rating and intended use for each configuration.

Compatible With Insta360, GoPro, DJI, and AKASO Cameras

The mounting kit is advertised as compatible with several popular action-camera families.

The included action-camera adapter allows the pole to support compatible mounting interfaces.

Compatibility note: Verify the exact adapter requirements, camera weight, and supported mounting configuration before purchasing. Compatibility with a camera does not establish that the fully extended rig is safe for moving-vehicle use.

Ideal for Automotive YouTube Creators

For automotive YouTube creators, one of the biggest challenges is capturing footage that looks different from every other driving video.

A standard dashboard camera can document the road, but it rarely captures the entire vehicle.

A properly positioned 360-degree camera can provide a more immersive perspective, helping viewers appreciate vehicle styling, wheel fitment, suspension setup, and the surrounding environment.

This can be particularly useful for project-car introductions, automotive event coverage, and promotional content.

For more automotive DIY guides, enthusiast features, and technical articles, explore My Pro Street Online.

For automotive components, performance upgrades, and replacement parts, visit Pro Street Online.

How to Install the Triple Strong Suction Cup Camera Mount

Proper installation is essential for protecting both the camera and the vehicle.

Step 1: Select a compatible surface

Choose a clean, smooth, nonporous mounting surface that provides sufficient space for all suction cups.

Avoid textured plastics, heavily curved panels, damaged paint, and areas that could interfere with driver visibility or vehicle operation.

Step 2: Clean the attachment area

Remove dust, dirt, grease, wax residue, and moisture.

Ensure the surface is completely dry before installing the suction cups.

Step 3: Install the triple-cup assembly

Position the suction cups so they form the intended triangular mounting arrangement.

Engage each suction mechanism according to the manufacturer’s instructions.

Step 4: Attach the extension pole

Connect the aluminum telescoping pole to the mounting assembly.

Use the shortest practical extension for the desired shot.

Step 5: Install the camera

Attach the compatible camera adapter and verify that the complete camera setup is within the permitted load rating.

Step 6: Adjust the filming angle

Position the camera for the desired composition.

If using an Insta360 camera, align the selfie stick with the camera’s stitching area to improve the invisible pole effect.

Step 7: Secure and inspect

Tighten all locking mechanisms and use an appropriately rated safety tether connected to an independent anchor point.

Perform a stationary recording test and inspect the mounting system for movement or suction loss.

Do not attempt high-speed exterior filming based solely on the seller’s advertised claims.

Triple Strong Suction Cup Camera Mount Specifications

Why Choose a 67-Inch Camera Mount Instead of a Shorter Rig?

The main advantage of this system is its extended camera reach.

Shorter camera mounts are generally easier to position and place less leverage on their attachment points.

However, a longer extension pole can create wider compositions and more dramatic third-person perspectives.

For 360-degree cameras, additional distance between the lens and vehicle can make it easier to include the entire car in the frame.

The tradeoff is increased mechanical leverage, greater sensitivity to vibration, and a lower maximum payload at full extension.

For stationary automotive filming, the additional reach may be useful. For moving-vehicle applications, the increased risk requires substantially greater caution.

Final Verdict: Is the Triple Strong Suction Cup Camera Mount Worth It?

The Triple Strong Suction Cup Camera Mount offers an interesting combination of adjustable camera positioning, multi-point suction attachment, and a long telescoping extension pole.

Its 67-inch invisible selfie stick is the most distinctive feature, especially for Insta360 users interested in creating immersive third-person automotive footage.

The ability to use the suction cup assemblies in different configurations also adds versatility.

However, the manufacturer’s high-speed retention claim should not be relied upon without independent testing and verified operating limits.

Our assessment: This camera mount is worth considering for Insta360 enthusiasts and automotive content creators who want extended camera positioning for stationary filming and controlled production environments.