Reinforced Threads for a Secure Seal
The cap and reinforced bottle threads are designed to support reliable sealing and repeated refills.
Start the threads squarely and tighten as directed. Reinforcement helps durability, but forcing a misaligned cap can still damage a connection.
Check the seal and fittings before pressurizing the system.
Stable Six-Sided Canister
The six-sided bottle and low base are designed to help the cannon stand upright when empty or filled.
Its shaped profile provides grip and helps resist rolling when placed on its side. The restrained Blackout finish gives the assembly a clean appearance alongside your other wash equipment.
Corrosion-Resistant Metal Fittings
The supplied description specifies stainless-steel fittings with an electroplated finish for added corrosion resistance.
Use compatible automotive shampoo, rinse the equipment after use and follow the manufacturer’s storage instructions. Do not assume the fittings make every chemical suitable for the cannon.
Check Your Pressure-Washer Setup
The cannon uses a 1/4-inch quick-connect connection. Confirm that your pressure-washer gun or adapter matches and that the washer meets the cannon’s operating requirements.
A matching connector alone does not establish suitable pressure, flow or foam performance. The supplied information does not specify minimum or maximum operating ratings.
Build a Complete Wash Process
Start by removing loose contamination, then use the foam cannon according to the shampoo and equipment instructions. Complete any required contact wash with clean tools, rinse thoroughly and dry promptly.
If paint still feels rough afterward, Pro Street’s explanation of what a clay bar removes that washing leaves behind can help you identify bonded contamination that needs separate treatment.
Product Specifications
| Specification | Detail |
|---|---|
| Brand | Blackline |
| Product | Foam Cannon PRO |
| Equipment type | Pressure-washer foam cannon |
| Connection | 1/4-inch quick connect |
| Bottle opening | 42mm wide mouth |
| Spray adjustment | Adjustable fan with vertical and horizontal orientation |
| Canister design | Six-sided profile with low, stable base |
| Bottle threads | Reinforced |
| Fittings | Stainless steel with electroplated finish, per supplied description |
| Finish | Blackout |
| Bottle capacity | Not specified in supplied information |
| Pressure and flow requirements | Confirm manufacturer specifications |
Upgrade Your Foam-Cannon Setup
The Blackline Foam Cannon PRO brings adjustable coverage, convenient refilling and a stable bottle design to your wash routine.
Add it to your detailing kit after confirming compatibility with your pressure washer.
Add to Cart
Frequently Asked Questions
Will it fit my pressure washer?
It uses a 1/4-inch quick-connect fitting. Check your gun or adapter connection and confirm the manufacturer’s pressure and flow requirements before ordering.
Can I attach it directly to a garden hose?
This is a pressure-washer foam cannon. A garden-hose connection is not identified in the supplied specifications.
Does it guarantee thick foam with every washer?
No. Foam output depends on equipment, shampoo, dilution, water conditions and adjustment.
Can I change the spray orientation?
Yes. The supplied description identifies vertical and horizontal fan orientations.
Is car shampoo included?
The supplied information does not identify included shampoo.
Is it guaranteed never to leak?
No absolute leak-free guarantee is established. The reinforced threads are designed to support sealing, but correct assembly and seal condition remain important.
Does foam replace contact washing?
Not necessarily. Follow your shampoo’s instructions and assess the contamination. Foam alone may not remove bonded road film or other stubborn dirt.
There are no reviews yet.