Ford-Engineered Maintenance Protection

Motorcraft products are designed to meet Ford’s engineering and service requirements, making this 5W-20 synthetic blend a natural choice for compatible Ford, Lincoln and Mercury engines.

XO-5W20-5Q3SP meets Ford WSS-M2C960-A1 and SN PLUS requirements.

Using the correct viscosity and specification matters. Oil is responsible for far more than simply making rotating parts slippery. It must flow quickly during startup, maintain a protective film at operating temperature, control contaminants and withstand repeated heat cycles.

For a deeper look at what happens when oil breaks down or maintenance intervals are stretched too far, read our My Pro Street guide to engine oil sludge causes and how to fix it.

Built for Cold Starts and Hot Operating Temperatures

The SAE 5W-20 viscosity provides relatively low resistance to flow during cold starts while maintaining the operating-temperature viscosity required by compatible engines.

That matters because some of an engine’s most demanding lubrication conditions occur immediately after startup. Oil needs to reach bearings, valvetrain components, timing hardware and other lubricated surfaces quickly.

Once the engine reaches operating temperature, the formulation is engineered to resist oxidation and maintain protection under normal operating conditions.

Helps Control Deposits and Engine Wear

Heat, combustion byproducts, moisture and extended service intervals can eventually contribute to varnish, deposits and sludge.

Motorcraft’s additive package is designed to help minimize deposits while protecting internal surfaces against wear, corrosion and oxidation.

Maintaining clean oil is especially important in engines using hydraulically operated systems such as variable valve timing. Small oil passages and control solenoids are far less enthusiastic about sludge than your wallet is about paying for their replacement.

Friction-Reducing Formula

Motorcraft SAE 5W-20 incorporates friction-reducing technology designed to provide wear protection while supporting energy-conserving operation.

Ford specifies lower-viscosity oils in compatible engines partly to reduce internal pumping and frictional losses. Compared with heavier SAE 5W-30 and 10W-30 oils, the correct 5W-20 lubricant can contribute to improved efficiency in engines specifically engineered for it.

That does not mean every Ford should run 5W-20.

Always verify the required viscosity, specification and oil capacity for your exact year, model, engine and operating conditions before ordering.

Motorcraft XO-5W20-5Q3SP Vehicle Applications

Motorcraft XO-5W20-5Q3SP may be suitable for select model years and engine combinations of the following vehicles when SAE 5W-20 meeting the applicable Ford specification is required.

Ford Applications

Bronco Sport: 2021–2024
Crown Victoria: 2003–2011
E-150: 2003–2014
E-150 Club Wagon: 2003–2004
E-250: 2003–2014
E-350: 2005–2015
E-350 Club Wagon: 2003–2004
E-350 Super Duty: 2003–2004
E-450: 2005–2015
E-450 Super Duty: 2003–2004
E-550 Super Duty: 2003
EcoSport: 2018–2022
Edge: 2007–2018
Escape: 2003–2006, 2013–2022
Escape Hybrid: 2005–2012
Escort: 2000–2003
Excursion: 2003–2005
Expedition: 2003–2014
Explorer: 2003–2012, 2014, 2016–2023
Explorer Sport: 2003–2004
F-150: 2003–2023
F-250 Super Duty: 2003–2004, 2011–2015
F-350 Super Duty: 2003–2004
F-450 Super Duty: 2003–2015
F-550 Super Duty: 2003–2004, 2011–2015
Fiesta: 2011–2019
Five Hundred: 2005–2007
Flex: 2009–2019
Focus: 2003–2018
Focus RS: 2016–2018
Freestar: 2004–2007
Freestyle: 2005–2007
Fusion: 2006–2012
Mustang: 2003–2020
Police Interceptor Sedan: 2013–2019
Police Interceptor Utility: 2013–2024
Ranger: 2004–2011
Taurus: 2003–2019
Taurus X: 2008–2009
Thunderbird: 2003–2005
Transit: 2015–2019, 2021
Transit Connect: 2010–2018, 2020–2023
Windstar: 2003

Lincoln Applications

Aviator: 2003–2005
Continental: 2017–2020
LS: 2003–2006
MKS: 2009–2016
MKT: 2010–2019
MKX: 2007–2018
MKZ: 2007–2016
Mark LT: 2006–2008
Navigator: 2003–2014
Town Car: 2003–2011
Zephyr: 2006

Mercury Applications

Grand Marquis: 2003–2011
Marauder: 2003–2004
Mariner: 2005–2006
Mariner Hybrid: 2007–2011
Milan: 2006–2011
Montego: 2005–2007
Monterey: 2004–2007
Mountaineer: 2003–2010
Sable: 2005, 2008–2009

Important: Model-year coverage alone does not guarantee compatibility. Different engines within the same model can require different oil viscosities or specifications. Confirm your engine’s factory requirements before purchase.

Product Specifications

Brand: Motorcraft
Manufacturer Part Number: XO-5W20-5Q3SP
Oil Type: Synthetic Blend Motor Oil
SAE Viscosity: 5W-20
Container Size: 5 Quart
Ford Specification: WSS-M2C960-A1
Performance Standard: SN PLUS
Country of Origin: United States
Package Weight: Approximately 11.5 lb
Package Dimensions: 12.45 cm L × 21.72 cm W × 30.86 cm H
Product Type: Automotive Engine Oil / Maintenance Fluid

Who Should Buy Motorcraft XO-5W20-5Q3SP?

This 5-quart Motorcraft oil is a strong choice for owners maintaining a compatible Ford, Lincoln or Mercury vehicle that specifically calls for SAE 5W-20 meeting the appropriate Ford specification.

It is particularly appealing to owners who want an OE-focused maintenance product rather than experimenting with an oil selected solely by viscosity.

Whether you’re servicing an F-150, Mustang, Crown Victoria, Explorer, Ranger, Focus, Navigator, Grand Marquis or another compatible application, start with the manufacturer’s oil requirements and match the lubricant to the engine.

Correct oil. Correct specification. Less guesswork.

Add Motorcraft XO-5W20-5Q3SP 5W-20 Synthetic Blend Motor Oil to your maintenance shelf and have five quarts ready when the next oil change comes due.