Two 5-Quart Jugs – 10 Total Quarts

This listing includes a 2-pack of 5-quart containers.

That gives you:

5 QUARTS × 2 = 10 TOTAL QUARTS

The twin-pack format is useful for DIY owners who maintain their own vehicles.

Depending on your engine’s oil capacity, it can provide enough lubricant for multiple oil changes or allow you to keep additional oil available for future maintenance.

Always check the engine’s actual oil capacity before servicing.

“Looks like about five quarts” is not a factory specification.

Designed to Help Improve Fuel Economy

The Advanced Fuel Economy name isn’t just marketing decoration.

Mobil 1 0W-20 is a low-viscosity lubricant engineered to reduce internal friction in compatible engines.

Less friction means the engine can potentially expend less energy overcoming internal resistance.

Mobil 1 notes that fuel-economy improvement may be possible when switching from a higher-viscosity lubricant to an appropriate lower-viscosity grade.*

Actual improvement depends on factors including:

• Engine design
• Previous oil viscosity
• Vehicle type
• Ambient temperature
• Driving conditions
• Driving style
• Vehicle condition

Most importantly, only use SAE 0W-20 where it is appropriate for the engine.

Don’t switch viscosity purely to chase fuel economy unless the vehicle manufacturer permits it.

Mobil 1 Triple Action Formula

Mobil 1 Advanced Fuel Economy uses the company’s signature Triple Action Formula.

Its mission centers around three areas:

PERFORMANCE

PROTECTION

CLEANLINESS

Specialized synthetic components help reduce friction while Mobil 1’s additive package works to prevent sludge and harmful deposits.

That helps keep critical internal engine components clean while maintaining protection throughout the service interval.

Full Synthetic 0W-20 Protection

SAE 0W-20 is a low-viscosity grade commonly used in modern engines engineered around tighter tolerances, efficiency targets and rapid cold-start lubrication.

Mobil 1 combines this viscosity with full-synthetic base oils designed to provide stability across a broad temperature range.

The result is an oil designed to circulate rapidly when cold while maintaining the required SAE 20 characteristics at operating temperature.

For an engine specifically engineered around 0W-20, that’s exactly what you want.

Outstanding Cold-Weather Protection to -40°F

Cold starts are among the most demanding moments for an engine’s lubrication system.

After sitting, oil must circulate quickly to bearings, camshafts, timing components and other critical surfaces.

Mobil 1 Advanced Fuel Economy 0W-20 is formulated to provide low-temperature protection down to -40°F, helping deliver rapid lubrication during extreme cold-weather starts.

Its 0W winter rating makes cold-start performance one of this oil’s defining characteristics.

That matters even if you don’t live somewhere where your eyelashes freeze together.

Faster oil circulation during ordinary cold starts is still useful.

Internal Engine Heat Protection Up to 500°F

The opposite temperature extreme matters too.

Mobil 1 Advanced Fuel Economy provides internal engine heat protection at temperatures up to 500°F in applicable areas of the engine.

Modern engines can generate substantial localized heat, particularly around pistons, turbochargers and other heavily loaded components.

A full-synthetic lubricant must resist deterioration while continuing to protect these critical areas.

Mobil 1’s formulation is designed to maintain protection across those demanding operating conditions.

Up to 10,000 Miles of Protection

Mobil 1 advertises protection for up to 10,000 miles or one year, whichever comes first.**

The oil’s synthetic formulation helps control oxidation and maintain viscosity while fighting deposits throughout the service interval.

That doesn’t automatically mean every vehicle should run exactly 10,000 miles between oil changes.

Service intervals depend on:

• Manufacturer recommendations
• Oil-life monitoring systems
• Driving conditions
• Severe-service schedules
• Engine condition
• Oil-filter capability
• Warranty requirements

Follow the service schedule appropriate for your vehicle.

Ten thousand miles is a protection claim, not permission to ghost your maintenance schedule.

Oxidation Control Helps Prevent Oil Breakdown

Heat and oxygen gradually attack engine oil.

This process, known as oxidation, can contribute to viscosity changes, deposits and lubricant deterioration.

Mobil 1 Advanced Fuel Economy is formulated to control oxidation and help prevent premature oil breakdown.

Maintaining viscosity and lubricant stability becomes especially important when oil remains in service for thousands of miles.

Helps Prevent Sludge and Deposits

Mobil 1’s synthetic formulation contains specialized components designed to prevent damaging sludge and deposits from accumulating inside the engine.

Keeping critical components clean supports:

• Proper oil circulation
• Piston cleanliness
• Timing-system operation
• Valvetrain lubrication
• Long-term engine performance

If you want a deeper look at how sludge forms and what happens when deposits get out of control, read our My Pro Street guide to Engine Oil Sludge Causes and How to Fix It.

Good oil is considerably cheaper than discovering what restricted lubrication does to an engine.

ILSAC GF-6 Performance

Mobil 1 Advanced Fuel Economy 0W-20 meets ILSAC GF-6 performance requirements according to the supplied product specifications.

GF-6 addresses important areas of modern gasoline-engine lubrication, including:

• Fuel economy
• Low-speed pre-ignition protection
• Timing-chain wear
• Deposit control
• Oxidation resistance
• Engine wear

This makes the oil appropriate for compatible modern engines requiring the applicable 0W-20 specification.

Always verify current specifications against your vehicle manufacturer’s requirements before use.

Low-Speed Pre-Ignition Protection

Low-speed pre-ignition, or LSPI, is a concern associated particularly with certain turbocharged gasoline direct-injection engines.

LSPI can create abnormal combustion and extreme cylinder pressures under particular low-speed, high-load conditions.

Modern oil standards incorporate testing designed to help reduce lubricant-related LSPI risk.

Mobil 1 Advanced Fuel Economy’s GF-6 performance provides LSPI protection for compatible applications.

Timing-Chain Wear Protection

Timing chains spend their lives relying on engine oil.

The chain, guides and tensioning system depend on proper lubrication to minimize wear and maintain accurate valve timing.

Mobil 1 Advanced Fuel Economy 0W-20 provides protection against timing-chain wear as part of its modern lubricant performance.

That’s important because replacing engine oil is easy.

Replacing a timing set buried behind half the engine accessories is considerably less entertaining.

Mobil 1 Advanced Fuel Economy 0W-20 Specifications

Brand: Mobil 1
Product Line: Advanced Fuel Economy
Product Type: Full Synthetic Motor Oil
SAE Viscosity: 0W-20
Container Size: 5 Quarts Each
Package Quantity: 2
Total Oil Quantity: 10 Quarts
Formula: Triple Action Formula
ILSAC: GF-6 per supplied product specifications
Extended Protection: Up to 10,000 miles or one year**
Low-Temperature Protection: Down to -40°F
Internal Engine Heat Protection: Up to 500°F
Fuel-Economy Focus: Yes
Oxidation Control: Yes
Sludge Protection: Yes
LSPI Protection: Yes
Timing-Chain Wear Protection: Yes

What Does 0W-20 Mean?

The numbers describe the oil’s viscosity characteristics at different temperatures.

The 0W identifies its low-temperature or winter viscosity classification.

The 20 represents its operating-temperature SAE viscosity grade.

A 0W-20 oil is therefore designed to provide extremely strong cold-flow characteristics while maintaining an SAE 20 viscosity classification once the engine reaches operating temperature.

It is not simply “thin oil.”

It’s a carefully engineered viscosity grade designed for engines built to use it.

Advanced Fuel Economy 0W-20 vs Mobil 1 5W-20

Both oils are low-viscosity full synthetics, but they aren’t identical.

The defining difference is their cold-temperature viscosity classification.

Mobil 1 Advanced Fuel Economy 0W-20 carries a 0W winter rating and emphasizes low-temperature flow and fuel-economy performance.

A 5W-20 carries a different low-temperature viscosity classification while sharing the SAE 20 operating-temperature grade.

Which is correct depends on the engine manufacturer’s specifications.

Don’t choose based on which number looks more technologically impressive.

Use the viscosity your engine was designed around.

Who Should Buy Mobil 1 Advanced Fuel Economy 0W-20?

This 2-pack makes particular sense for DIY owners maintaining compatible vehicles requiring SAE 0W-20.

Potential applications include:

• Modern gasoline passenger cars
• SUVs and crossovers
• Light vans
• Light trucks
• Compatible turbocharged engines
• Compatible supercharged engines
• Fuel-injected multi-valve engines
• Vehicles designed around low-viscosity oil
• Cold-weather vehicles
• Drivers prioritizing fuel efficiency
• Owners performing their own oil changes
• Multi-vehicle households using compatible 0W-20 oil
• Drivers wanting to stock 10 quarts at once

Always verify the required viscosity and specifications for your exact vehicle and engine.

Efficiency Without Sacrificing Protection

Low-viscosity oil doesn’t mean low protection when the engine is designed to use it.

Mobil 1 Advanced Fuel Economy Full Synthetic 0W-20 combines low-friction performance with Mobil 1’s Triple Action Formula to deliver engine protection, cleanliness and efficiency.

Its formula helps control oxidation, prevent sludge, protect timing components and deliver rapid cold-start lubrication while providing protection for up to 10,000 miles or one year.**

And with two 5-quart jugs totaling 10 quarts, you’ll have plenty ready for upcoming maintenance.

If your engine requires an appropriate SAE 0W-20 full synthetic, grab this Mobil 1 Advanced Fuel Economy 2-pack and keep your engine protected without making it work harder than necessary.

*Potential fuel-economy improvement may result when switching from a higher-viscosity lubricant to an appropriate lower-viscosity grade. Actual results depend on vehicle and engine design, previous oil viscosity, ambient temperature, driving conditions and other factors. Always use a viscosity permitted by the vehicle manufacturer.

**Mobil 1 advertises protection for up to 10,000 miles or one year, whichever comes first. Follow applicable vehicle-manufacturer recommendations, oil-life monitoring systems, severe-service schedules and warranty requirements.