
If you’re replacing the front lower ball joints on a first-generation Lexus IS300, two part numbers show up everywhere: K500066 and K500067. They look almost identical in photos, but they aren’t interchangeable. Ordering the wrong one is one of the easiest ways to lose a weekend on this job. This guide explains which IS300 front lower ball joint number goes where, how to confirm your car is covered, and whether a single joint, a pair or a larger front-end kit makes sense.
Quick answer: which IS300 front lower ball joint goes on each side
- K500066 is the front left (driver-side) lower ball joint.
- K500067 is the front right (passenger-side) lower ball joint.
- Both are listed for the 2001–2005 Lexus IS300 (the first-generation, rear-wheel-drive car with the 3.0L 2JZ-GE inline-six).
- Neither is listed for the 2006-and-newer IS250, IS300 or IS350. Those cars use different parts.
“Left” and “right” are always described from the driver’s seat, facing forward. On a U.S.-market car, left is the driver side.
Which IS300 models are covered?
The listings we reviewed agree on the basic coverage:
- 2001 IS300: sedan only. The SportCross wagon wasn’t sold that year.
- 2002–2005 IS300: sedan and SportCross wagon.
Early-2001 cars need an extra check. Some listings note a production-date split for the earliest 2001 cars, but they don’t agree on the exact cutoff month. One says September 2000; another says October 2000. If your car is a 2001, read the build date on the driver’s door-jamb label. Then confirm the correct part with a Lexus parts counter using your VIN before you order. Don’t rely on model year alone.
Single joint, matched pair or front-end kit?
All of the options below are listed for the 2001–2005 IS300. The right choice depends on how much of the front end you’re replacing.
| Option | What’s in the box | Good fit if… |
|---|---|---|
| MOOG K500067 | One front right (passenger-side) lower ball joint | Only the passenger side needs replacing, and you want the MOOG-numbered part |
| TRQ front left lower ball joint (interchanges with K500066) | One front left (driver-side) lower ball joint | Only the driver side needs replacing |
| Detroit Axle front lower ball joint pair | K500066 and K500067, one per side | You’re doing both sides at once |
| SCITOO K500066/K500067 pair | One left and one right lower ball joint | You’re doing both sides at once |
| K500066/K500067 ball joint pair | One left and one right lower ball joint | You’re doing both sides at once |
| Detroit Axle 8-piece front kit | Both lower ball joints, inner and outer tie rods, and steering-rack boots | The tie rods or rack boots are also due |
| TRQ 8-piece front kit | Both lower ball joints, front lower forward and rearward control arms, and sway-bar links | The lower control arms or their bushings are also worn |
Notice that the two 8-piece kits cover different parts. The Detroit Axle kit adds steering components (tie rods and rack boots). The TRQ kit adds control arms and sway-bar links. Pick the kit that matches what’s actually worn on your car, not the one with the bigger parts count.
Should you replace both sides?
A single joint is a valid repair if only one side is worn. Many owners still replace both sides at once, because the two joints have covered the same miles and the front end is already apart. The pairs above make that simple. Have both sides inspected before you decide. If the other joint is still tight and its boot is intact, you don’t have to replace it.
Before you order: a five-point check
- Confirm the generation. These parts are listed for 2001–2005 only. If your car is a 2006 or newer IS, look elsewhere.
- Check the build date on 2001 cars. Use the door-jamb label and your VIN, as described above.
- Match side to part number. K500066 is the left (driver side). K500067 is the right (passenger side).
- Inspect the parts next to the ball joint. If the lower control arm bushings, tie-rod ends or sway-bar links are also worn, a kit may save you a second teardown.
- Read the listing’s included-parts list. Check whether mounting hardware is included, so you know whether to reuse or source bolts and nuts.
Installation notes
The lower ball joint is a steering and suspension safety part. Use the torque values and procedure from the factory repair manual for your car, and install new cotter pins where the design calls for them. If you’re not comfortable supporting the car safely and working on front-suspension fasteners, have a qualified shop do the job. After any front-suspension work, ask your installer whether an alignment check is needed for the parts that were disturbed.
Frequently asked questions
Is K500066 the driver side or the passenger side?
K500066 is listed as the front left lower ball joint, which is the driver side on a U.S.-market IS300. K500067 is the front right (passenger side).
Do these ball joints fit a 2006 or newer Lexus IS?
No. The listings exclude the second-generation IS250, IS300 and IS350 from 2006 onward.
Do they fit the IS300 SportCross wagon?
The listings include the SportCross for 2002–2005. There was no 2001 SportCross.
Can I use the same part number on both sides?
No. Left and right are separate part numbers. Order K500066 for the left and K500067 for the right, or buy a pair that includes both.
