PellKing 5-in-1 Suction Car Mount for Insta360 X5, X4, GoPro MAX & DJI – 44.9-Inch Invisible Selfie Stick Camera Rig

Adjustable 44.9-Inch Invisible Selfie Stick

One of the most useful components included with the PellKing kit is its telescoping selfie stick.

The pole adjusts from approximately 28cm to 114cm, equivalent to about 11 inches to 44.9 inches.

This adjustable length allows creators to experiment with different camera positions without permanently modifying their vehicles.

A shorter configuration can be useful for compact camera setups, while a longer extension can help capture wider vehicle compositions.

For compatible 360-degree cameras, the extension pole may also produce the familiar invisible selfie stick effect.

How the invisible selfie stick effect works

Many 360-degree cameras use two opposing lenses to capture overlapping panoramic footage.

The images are combined through stitching software to create a continuous 360-degree recording.

When a narrow selfie stick is positioned within the camera’s stitching blind spot, the software can conceal much of the pole.

This creates the appearance of a camera floating near the vehicle.

The PellKing kit is advertised as supporting this effect with compatible Insta360, GoPro MAX, and DJI panoramic cameras.

Actual results depend on camera model, recording mode, stitching software, pole alignment, and lighting conditions.

The effect is not guaranteed with every camera or shooting configuration.

Double-Sleeve Support Arm Helps Reduce Camera Pole Movement

Long camera extension poles can create additional leverage and unwanted movement.

To address this, the PellKing mounting kit includes a clamping bracket with a double-sleeve support arm.

The manufacturer describes this design as a way to reduce selfie stick wobble and bending.

The additional support can help position the pole more securely than a configuration that relies entirely on a single unsupported connection.

This is particularly useful when setting up longer camera extensions for stationary filming.

However, the support arm does not eliminate vibration or guarantee stability during vehicle movement.

For the best results, keep the extension pole as short as practical and confirm that all clamps and adjustment points are properly tightened.

Multiple Camera Angles for Automotive Filming

The PellKing camera mount supports both vertical and tilted selfie stick positioning.

This allows creators to adjust camera placement depending on the desired perspective.

Potential filming applications include:

• Stationary third-person vehicle shots.
• Low-angle automotive photography.
• Elevated 360-degree vehicle compositions.
• Project-car walkaround videos.
• Automotive promotional footage.
• Controlled-course filming where appropriately rated and permitted.

The adjustable mounting system makes it possible to experiment with different framing options without installing permanent brackets.

For automotive enthusiasts producing YouTube content, this flexibility can help create more engaging vehicle introductions and project updates.

Compatible With Insta360, GoPro MAX, and DJI 360 Cameras

The PellKing 5-in-1 Suction Car Mount Kit is advertised as compatible with several popular panoramic camera systems.

Advertised camera compatibility

Compatibility note: These are manufacturer-advertised camera families. Confirm the exact mounting interface, adapter requirements, and camera weight before purchasing.

Not every action camera supports invisible selfie stick removal, even when it can be physically attached to the mounting system.

Capture Drone-Style Car Footage Without Flying a Drone

One of the most appealing applications of the PellKing kit is its ability to create low-altitude camera perspectives.

By positioning a compatible 360-degree camera away from the vehicle body, creators can capture footage that resembles a floating tracking camera.

This can be especially effective for automotive promotional videos, stationary vehicle showcases, and project-car introductions.

For example, a 360-degree camera positioned above a parked vehicle can capture a wide composition showing the hood, roofline, wheels, and surrounding environment.

During editing, the footage can be reframed to emphasize different parts of the vehicle.

The invisible selfie stick effect can make these shots appear more polished by reducing the visibility of the camera support pole.

For additional automotive tutorials, project-car content, and technical articles, explore My Pro Street Online.

How to Install the PellKing 5-in-1 Suction Car Mount

Proper installation is essential for protecting the camera, vehicle, and surrounding people.

Step 1: Choose suitable mounting surfaces

Select smooth, clean, nonporous surfaces that provide enough space for the suction cup assemblies.

Avoid textured dashboards, heavily curved panels, damaged paint, and surfaces that cannot maintain a complete suction seal.

Step 2: Clean the mounting areas

Remove dust, grease, wax residue, dirt, and moisture.

Make sure the surfaces are completely dry before installing the suction cups.

Step 3: Position the five suction cups

Arrange the suction cup assemblies according to the included manufacturer instructions.

Confirm that every suction cup establishes complete contact with its mounting surface.

Step 4: Install the support bracket

Connect the clamping bracket and double-sleeve support arm.

Check that all mounting connections are secure.

Step 5: Attach the telescoping selfie stick

Install the extension pole and select the shortest practical length for the intended shot.

Step 6: Mount the camera

Attach the compatible Insta360, GoPro MAX, or DJI camera using the appropriate adapter.

Verify that the complete camera assembly is within the manufacturer’s permitted load limits.

Step 7: Adjust the camera angle

Position the pole vertically or at the desired tilt angle.

For compatible 360-degree cameras, align the selfie stick with the camera’s stitching blind spot.

Step 8: Inspect the complete assembly

Check all suction cups, clamps, support arms, and camera connections.

Use a suitable independent safety tether for exterior equipment.

Perform a stationary test recording and inspect for unwanted movement.

The supplied product description does not establish an independently verified maximum operating speed or safe dynamic payload. Do not assume the rig is suitable for high-speed exterior filming.

PellKing 5-in-1 Suction Car Mount Specifications

PellKing Five-Suction Mount vs. Triple Suction Cup Camera Rigs

The PellKing kit differs from conventional triple suction cup systems through its five-point mounting arrangement and double-sleeve pole support.

The PellKing configuration may be attractive to creators who want additional mounting points and dedicated support for an extended selfie stick.

However, the number of suction cups should not be used as the sole measure of mounting safety.

Actual performance depends on the complete assembly and its verified operating limits.

Who Should Consider the PellKing 5-in-1 Camera Mount?

Insta360 owners: The kit is particularly relevant to creators who want to experiment with invisible selfie stick footage and third-person vehicle perspectives.

Automotive YouTubers: Its adjustable camera positioning can help capture more interesting project-car introductions, vehicle showcases, and stationary walkarounds.

Car photographers: The telescoping pole and adjustable support system can provide additional stationary camera placement options.

360-degree content creators: The mount offers a configurable platform for capturing panoramic footage from suitable vehicle-mounted positions.

For automotive performance parts, replacement components, and enthusiast accessories, visit Pro Street Online.

Final Verdict: Is the PellKing 5-in-1 Suction Car Mount Worth Buying?

The PellKing 5-in-1 Suction Car Mount offers an interesting combination of multi-point suction attachment, adjustable camera positioning, and dedicated selfie stick support.

Its five 3.3-inch suction cups and double-sleeve clamping arm distinguish it from simpler single- and triple-cup camera holders.

The 44.9-inch extension pole also provides useful flexibility for compatible 360-degree cameras.

For Insta360 enthusiasts interested in cinematic third-person vehicle footage, this kit offers several creative possibilities.

However, buyers should verify the complete mounting system’s weight limits, camera compatibility, and operating restrictions before using it.

Final assessment: The PellKing 5-in-1 Suction Car Mount is worth considering for automotive content creators who want a configurable multi-point camera rig for stationary vehicle filming and compatible panoramic camera setups.

Editorial note: Product specifications and compatibility are based on the supplied seller description. No independent hands-on testing, suction retention testing, or moving-vehicle performance testing has been conducted.