WeatherTech 445841-443052 FloorLiners for 2012–2016 Ford Super Duty

Required Rear Configuration

Part 443052 is the second-row liner for:

• Crew Cab or SuperCrew-style Super Duty trucks
• Factory carpet
• Full-width rear passenger footwell
• Applicable gas and diesel models

It does not make the complete set compatible with an Extended Cab or Regular Cab. The front piece may physically fit additional cab styles, but the combined package includes a Crew Cab-specific rear liner.

Critical Fitment Restrictions

• Crew Cab models only for complete first- and second-row coverage.
• Requires a floor-mounted 4WD transfer-case shifter.
• Requires the raised driver-side footrest.
• Does not fit trucks with an electronic dash-mounted 4WD selector.
• Does not fit two-wheel-drive models.
• Does not fit trucks with a flat driver-side floor lacking the raised footrest.
• Designed for factory carpet.
• Does not fit Regular Cab trucks as a complete set.
• Does not fit SuperCab/Extended Cab trucks as a complete set.
• Does not fit the redesigned 2017 or newer Super Duty.
• Does not include under-seat storage or a rear cargo liner.

Compatible Engines

Engine choice generally doesn’t change this particular FloorLiner application. Compatible trucks may be equipped with:

• 6.2-liter gasoline V8
• 6.7-liter Power Stroke turbodiesel V8
• Other fleet or chassis-cab engines when the cab and floor match

The 4WD shifter, raised footrest and Crew Cab floor are the deciding factors.

Compatible Trim Families

Potential applications include properly configured versions of:

• XL
• XLT
• Lariat
• King Ranch
• Platinum

Higher trims more commonly use an electronic transfer-case selector, so don’t assume fitment based on trim alone. Look at the floor. If there’s a physical 4WD lever beside the driver, you’re at least reading the correct section.

What Comes in the Set?

The package includes:

• Driver-side front FloorLiner
• Passenger-side front FloorLiner
• One-piece Crew Cab second-row FloorLiner
• Black finish

Part 445841 covers the front. Part 443052 is the rear Crew Cab liner.

Product Specifications

Laser-Measured Work-Truck Protection

WeatherTech digitally measures the Super Duty’s cab floor to shape the liners around the transmission tunnel, transfer-case shifter, center console, seat tracks and door openings.

The raised edges and channels help contain:

• Mud and worksite dirt
• Rainwater and snowmelt
• Road salt
• Sand and gravel
• Oil and grease carried in on boots
• Food and drink spills
• Hunting, towing and outdoor debris

The rear liner spans the wide Crew Cab floor, reducing the exposed carpet normally left between separate rear mats.

WeatherTech provides additional construction and care information on its official Super Duty FloorLiner page.

For more truck-related coverage, see Pro Street’s truck styling trends guide and OEM replacement-parts guide.

HDTE Material and Drainage Channels

The High-Density Tri-Extruded material gives the liners a rigid core while providing surface texture against the carpet and beneath occupants’ shoes.

Its molded design offers:

• Raised sidewall coverage
• A dedicated opening around the 4WD floor shifter
• Structured drainage channels
• Lower liquid reservoirs
• Resistance to ordinary interior wear
• Easy removal for cleaning
• Compatibility with factory retention devices

The shifter opening is why configuration matters. A liner designed around a physical lever doesn’t become correct for an electronic-selector truck simply because optimism is applied.

Installation

Installation requires no cutting when the application is correct:

1. Remove all factory and aftermarket mats.
2. Vacuum the exposed carpet.
3. Verify the presence of the raised driver footrest.
4. Confirm the truck has a floor-mounted 4WD shifter.
5. Place the driver-side liner around the shifter.
6. Engage the factory retention points.
7. Install the passenger-side liner.
8. Position the rear liner beneath the front seats.
9. Move both front seats through their full adjustment range.
10. Check accelerator, brake and shifter clearance.

Never stack FloorLiners over existing mats. The driver’s liner must remain secured and completely clear of the pedals.

For interior repair fundamentals, visit Pro Street’s complete dashboard repair guide.

Cleaning and Maintenance

Remove the liners before washing. Shake or vacuum loose dirt, rinse with water and use mild detergent as necessary.

Avoid silicone-based dressings and greasy protectants. These products may leave the surface slippery and attract additional dirt. A polished truck is good; polished foot controls are an unnecessary plot twist.

Allow the liners to dry before reinstalling them and check the shifter opening and driver-side retention hardware.

Frequently Asked Questions

What vehicles fit WeatherTech 445841-443052?

The set fits select 2012–2016 Ford F-250, F-350, F-450 and F-550 Super Duty Crew Cab 4WD trucks with carpet, a raised driver footrest and floor-mounted transfer-case shifter.

Does it fit a two-wheel-drive Super Duty?

No. Front part 445841 is shaped for a floor-mounted 4WD shifter.

Does it fit a truck with electronic four-wheel-drive controls?

No. Trucks with a dash-mounted electronic selector and no floor shifter require a different front liner.

Does it fit a SuperCab?

The complete set does not. Rear part 443052 is designed for a Crew Cab rear floor.

Does it fit a 2011 Super Duty?

Although rear liner 443052 may appear in some 2011 applications, the combined 445841-443052 set is listed beginning with 2012 because the front-floor configuration differs. Verify both pieces separately.

Does it fit a 2017 F-250?

No. Ford redesigned the Super Duty for 2017, including the cab and floor.

Does it fit both gasoline and diesel trucks?

Yes, when the cab, carpet, raised footrest and floor-mounted 4WD shifter match.

Does the set fit any center console?

The published application notes state that front part 445841 works with compatible console configurations. The floor-mounted shifter and footrest remain mandatory.

Can these liners be installed over factory mats?

No. Remove all existing mats before installing the WeatherTech FloorLiners.

Final Verdict

WeatherTech 445841-443052 is a well-suited all-weather set for a 2012–2016 Super Duty Crew Cab with a manual floor-mounted 4WD selector. Its raised edges, dedicated shifter contour and full-width rear coverage are ideal for trucks exposed to job-site dirt, winter weather and daily use.

Fitment is unusually specific, so verify the cab, carpet, raised footrest and transfer-case selector before ordering. If your truck changes into 4WD with a dashboard knob, this isn’t your set.