WeatherTech 441972-1-2 FloorLiners for the 2026 Toyota RAV4

Package Contents

The package covers both seating rows but does not include a cargo liner or seatback protector.

Product Specifications

Laser-Measured RAV4 Fit

WeatherTech uses digital measurements to model the RAV4’s footwells. The resulting liners follow the floor, transmission tunnel, seat mounts, and surrounding contours more closely than universal floor mats.

Raised walls extend along the front, back, and sides of the footwells to protect areas that flat mats leave exposed. This is particularly useful during wet weather, when moisture tends to migrate from shoes directly toward the most difficult section of carpet to clean.

The liners are designed to contain:

• Rainwater
• Snow and slush
• Road salt
• Mud and sand
• Food crumbs
• Spilled drinks
• Everyday passenger debris

HDTE Material Construction

WeatherTech’s traditional FloorLiner uses a proprietary High-Density Tri-Extruded material. The rigid core helps each liner retain its molded shape, while the textured upper surface supplies grip underneath shoes.

The underside is designed to create friction against the carpet. Factory-compatible retention provisions further secure the driver-side liner.

This product is different from WeatherTech FloorLiner HP. The HP version uses a softer, rubber-like thermoplastic elastomer, while the standard FloorLiner has a firmer molded feel.

Fluid Channels and Lower Reservoir

Advanced surface channels direct water and debris into lower collection areas. This helps prevent liquid from moving across the liner during acceleration, braking, or cornering.

Once contained, the material can be removed by carefully lifting the liner through the door opening. The raised perimeter helps keep the mess onboard during removal—assuming you don’t immediately tilt it toward the carpet and undo the entire point of owning floor liners.

Installation Instructions

Installation requires no drilling or adhesive:

1. Remove all factory and aftermarket floor mats.
2. Vacuum the exposed carpet.
3. Identify the driver- and passenger-side front liners.
4. Position the driver-side liner over the factory retention points.
5. Lock the liner securely into place.
6. Install the front-passenger liner.
7. Position the second-row liner beneath the rear seating area.
8. Confirm clearance around the pedals, seat tracks, rear vents, and electrical connections.

Never stack WeatherTech FloorLiners over original carpet mats. Stacking can prevent proper retention and allow the driver-side liner to interfere with the pedals.

For more information about checking model years and vehicle configurations, read our OEM replacement parts guide.

Cleaning and Maintenance

Remove the liners from the RAV4 before washing them. Shake out dry debris, rinse the surface, and use mild detergent or an approved floor-liner cleaner when necessary.

Avoid silicone-based dressings or greasy protectants. These products can create a slippery surface and attract additional dust.

Allow the liners to dry before reinstalling them. Check the driver-side retention points and pedal clearance after every removal.

Keeping the floor protected also supports the RAV4’s long-term interior condition. Owners addressing existing cabin damage may also find our complete dashboard repair guide useful.

Frequently Asked Questions

What does WeatherTech 441972-1-2 fit?

It fits select 2026 Toyota RAV4 Hybrid and RAV4 Plug-in Hybrid models with compatible factory-carpeted floors.

Does it fit a 2025 Toyota RAV4?

No. The 2026 RAV4 is a redesigned generation with different interior dimensions. A 2025 model requires the previous-generation application.

Does the set fit the RAV4 Plug-in Hybrid?

WeatherTech and retail application data include select 2026 RAV4 Plug-in Hybrid models. Confirm the exact trim through the manufacturer’s vehicle selector.

Does it fit a gas-only 2026 RAV4?

Toyota’s redesigned 2026 U.S. lineup is hybrid-only, with standard hybrid and plug-in-hybrid versions. There is no conventional gas-only U.S. model to match.

Does the package include a cargo liner?

No. Part 441972-1-2 covers the first and second seating rows only.

Is the rear liner one piece?

The 4419722 rear component is designed to cover the second-row floor area. Confirm its exact shape through the product images because some listings use representative photography.

Are these soft rubber mats?

No. Standard WeatherTech FloorLiners use a firmer HDTE construction. FloorLiner HP is the softer TPE option.

Can they be installed over the Toyota carpet mats?

No. Remove every original mat before installing the FloorLiners.

Final Verdict

WeatherTech 441972-1-2 is a practical interior-protection package for the redesigned 2026 Toyota RAV4. It provides vehicle-specific first- and second-row coverage with raised edges, drainage channels, and factory-compatible retention.

The important distinction is the model year. These liners are designed for the 2026-generation RAV4, not the visually similar 2019–2025 model. Confirm whether the vehicle is the standard Hybrid or Plug-in Hybrid and check the complete configuration before ordering.