2-Way LCD Remote With Up to 1/4-Mile Range
The Viper 5305V’s primary transmitter provides 2-way communication and LCD command confirmation.
That’s an important advantage over basic 1-way remote starters.
A conventional 1-way transmitter sends a command and leaves you wondering whether the vehicle received it. The 5305V can return supported status information to its 2-way remote.
This is particularly useful when using remote start from inside a house, office or other location where you can’t directly see the vehicle.
Viper rates the system for up to 1/4-mile range under ideal conditions.
Real-world range depends on buildings, walls, interference, installation and environmental conditions, so 1/4 mile should be treated as the system’s maximum advertised range rather than a guarantee that it’ll communicate through six concrete walls, a parking garage and whatever electromagnetic witchcraft is happening at Costco.
Remote Start for Compatible Automatic-Transmission Vehicles
When correctly installed and integrated, the Viper 5305V provides remote-start functionality for compatible vehicles.
Applications can include supported:
- Gasoline vehicles
- Fuel-injected engines
- Diesel vehicles
- Hybrid applications
- Automatic-transmission vehicles
Exact functionality depends on the vehicle and installation.
Do not assume compatibility based solely on engine type. Factory immobilizers, push-button ignition systems, data networks and other vehicle electronics can affect what hardware and configuration are required.
Professional compatibility verification should be performed using the exact year, make, model, trim, ignition type and transmission before purchasing.
Why This Bundle Includes a Directed DB3 Interface Module
The major difference between this package and a standalone Viper 5305V is the included Directed DB3 Databus All Interface Module.
Modern vehicles don’t necessarily provide simple analog wires for every function an aftermarket alarm or remote starter needs.
Factory systems may communicate through data networks and incorporate electronic immobilizers designed to prevent the engine from starting unless the vehicle detects an authorized key or credential.
An appropriate vehicle-interface module can help the aftermarket system communicate with supported factory electronics.
Depending on vehicle compatibility and configuration, a data interface can support integration functions required for remote start, security or convenience features.
This is why the DB3 is potentially valuable: it can provide the bridge between the Viper system and supported factory vehicle electronics.
The DB3 Must Be Flashed for Your Vehicle
This is the most important thing to understand before ordering this bundle:
The Directed DB3 interface module must be properly configured or flashed for the specific vehicle in which it will be installed.
Vehicle-specific configuration can depend on:
- Year
- Make
- Model
- Trim
- Ignition system
- Factory immobilizer
- Available firmware
- Installation configuration
The DB3 included with this bundle is not pre-flashed for your vehicle unless the product listing explicitly states otherwise.
Pro Street Online does not provide vehicle-specific DB3 flashing as part of this product unless specifically indicated.
Your professional installer should confirm that the included DB3 supports your application and that they have the necessary tools and firmware access to configure it correctly.
Does the DB3 Guarantee the 5305V Will Fit My Vehicle?
No.
Including a DB3 interface module does not automatically make the Viper 5305V compatible with every vehicle.
Some applications may use the DB3 effectively, while others can require a different interface, additional wiring, relays, accessories or application-specific hardware.
Some vehicles may not be appropriate applications for this particular system at all.
That’s why we strongly recommend checking compatibility with a professional installer before purchasing.
The bundle gives you two major components commonly needed for an installation. It isn’t a universal “remote start any car ever built” box.
SuperCode Remote Encryption
The Viper 5305V incorporates SuperCode remote technology, providing secure communication between compatible Viper transmitters and the control system.
Modern aftermarket security systems need more than a basic transmitter because the remote is effectively providing commands to your vehicle’s security and starting system.
SuperCode is part of Viper’s communication architecture for managing compatible remote functions and transmitters.
Security Functions
The 5305V provides a range of security controls including supported arm, disarm, auxiliary and panic functions.
The system also incorporates security technologies such as impact detection, audible alarm functions and starter interruption when properly installed.
If you’re comparing factory security with aftermarket systems, our guide to car alarms that actually protect your build explains why effective security usually involves several layers rather than relying exclusively on a siren.
Detection tells the system something is happening. A siren attracts attention. Starter interruption creates another obstacle. Connected upgrades can add remote notifications and location information.
No single feature is magic. Layering them is the point.
Anti-Carjacking / Vehicle Recovery Security Functions
The 5305V platform supports additional security functionality that can be configured as part of a professionally installed system.
How these features operate depends on installation, programming and vehicle compatibility.
Any anti-carjacking or starter-interruption functionality should be configured according to Viper’s installation requirements and applicable safety considerations.
The objective is additional theft deterrence—not creating an unexpected engine shutdown while cruising down the freeway. That would be less “vehicle security” and more “surprise physics lesson.”
Keyless Entry Capability
When properly integrated, the Viper 5305V can control compatible power door locks, allowing supported lock and unlock functions from the Viper transmitter.
This sounds straightforward until you start looking at how differently manufacturers implement door-lock electronics.
Older vehicles may provide simple lock and unlock circuits. Newer vehicles can route those commands through a body control module or vehicle data network.
Our Honda Civic car alarm wiring guide illustrates why vehicle-specific wiring information matters when integrating aftermarket alarm and keyless-entry equipment.
The included DB3 can simplify certain supported applications, but exact functionality still depends on the vehicle and firmware configuration.
Viper SmartStart Upgrade Potential
The Viper 5305V is SmartStart compatible, allowing compatible installations to be expanded with appropriate Viper SmartStart hardware.
For example, a compatible Viper VSM550 SmartStart Pro GPS module can add connected smartphone and GPS functionality to supported Viper systems.
That can potentially expand the installation with features such as:
- Smartphone control
- Connected remote-start functionality
- GPS vehicle location
- Location sharing
- SmartFence geofencing
- Speed alerts
- Vehicle movement alerts
- Low-battery notifications
- Security notifications with compatible systems
SmartStart hardware and applicable connected-service plans are sold separately.
This creates a useful upgrade path: install the core 5305V security and remote-start system with the necessary vehicle interface, then add connected functionality if you decide you want it.
Does This Bundle Include GPS Tracking?
No.
Neither the base Viper 5305V nor the Directed DB3 should be confused with a dedicated GPS tracking module.
The DB3 is a vehicle interface/bypass component.
It helps integrate compatible aftermarket equipment with supported factory vehicle systems.
GPS tracking requires appropriate additional connected hardware and service.
This distinction matters because shoppers often encounter terms such as “data module,” “SmartStart,” “interface” and “GPS module” while building a system. They aren’t interchangeable components.
Factory Immobilizers and Remote Start
One of the major challenges when adding remote start to a modern vehicle is the factory immobilizer.
An immobilizer is designed to prevent unauthorized engine operation. Depending on the vehicle, the system may require a valid transponder key, coded credential or electronic authorization before allowing the engine to run.
Naturally, remote start needs to satisfy the vehicle’s authorization requirements without leaving your actual key permanently taped underneath the dashboard like it’s 2003.
That’s where properly configured vehicle-interface and bypass technologies become important.
Incorrect immobilizer integration can produce a classic symptom: the engine cranks but doesn’t start or starts and immediately stalls.
Our engine cranks but won’t start diagnostic guide covers the major fuel, ignition, mechanical, electrical and immobilizer-related causes of that condition.
Professional Installation Required
The Viper 5305V + Directed DB3 bundle requires professional installation.
This package is not supplied as a universal plug-and-play DIY kit.
Installation can involve connections or data integration relating to:
- Ignition
- Starter
- Accessory circuits
- Brake input
- Parking lights
- Door triggers
- Door locks
- Factory alarm
- Factory immobilizer
- Vehicle data networks
- Hood safety input
- Auxiliary outputs
The DB3 additionally requires the correct vehicle-specific firmware/configuration where applicable.
Installation instructions and vehicle-specific wiring diagrams are not included with this renewed bundle unless explicitly stated in the listing.
Consult a qualified remote-start/security installer before purchasing to verify compatibility and determine whether additional components are required.
Renewed Product – Check Package Contents
This product is sold as renewed.
Renewed alarm and remote-start systems can represent excellent value, particularly when buying an established platform such as the Viper 5305V.
However, buyers should not assume a renewed bundle includes every piece of hardware originally supplied with every new retail version.
Review the specific package contents listed with this product before purchasing.
This listing is specifically built around the Viper 5305V security/remote-start system plus one Directed DB3 interface module. Any additional required vehicle-specific components should be confirmed separately.
Viper 5305V + DB3 Bundle Features
Brand: Viper / Directed
Primary Model: Viper 5305V
Included Interface: Directed DB3 Databus All Interface Module
Condition: Renewed
System Type: 2-Way Vehicle Security & Remote Start
Primary Remote: 4-button LCD 2-way transmitter
Secondary Remote: 4-button 1-way transmitter
Advertised Remote Range: Up to 1/4 mile
Remote Start: Yes, with compatible vehicle and installation
Security System: Yes
Keyless Entry: Supported with compatible installation
Arm / Disarm: Yes
Panic Function: Yes
Auxiliary Functions: Supported
SuperCode: Yes
SmartStart Compatibility: Yes, additional equipment required
GPS: Not included
Vehicle Data Interface: Directed DB3 included
DB3 Configuration: Vehicle-specific flashing/configuration required
DB3 Pre-Flashed: No, unless specifically stated otherwise
Professional Installation: Required
Additional Parts: May be required and sold separately
Who Should Buy the Viper 5305V + DB3 Bundle?
This bundle makes the most sense for someone who wants a Viper 5305V security and remote-start system and also needs a compatible data interface for the intended vehicle.
It’s particularly attractive when an installer has already confirmed that the Directed DB3 is appropriate for the application.
Compared with purchasing the 5305V alone, having the interface module included can reduce the number of major components that need to be sourced separately.
The key phrase there is “installer has already confirmed.”
Buying the bundle first and then asking whether the DB3 works with your car is basically remote-start roulette, except the prize is another trip to the parts store.
Frequently Asked Questions
What comes with this Viper 5305V bundle?
This renewed bundle combines a Viper 5305V 2-way security and remote-start system with one Directed DB3 Databus All Interface Module. Check the specific package-contents listing for all included accessories.
What does the Directed DB3 module do?
The DB3 is a vehicle interface module designed to help compatible aftermarket remote-start and security equipment integrate with supported factory vehicle electronics. Exact functions depend on the vehicle, firmware and installation.
Does the DB3 need to be flashed?
Yes, applicable DB3 installations require the module to be properly configured with the appropriate vehicle-specific firmware. The exact procedure depends on the vehicle and installation.
Is the DB3 in this bundle already flashed?
No, not unless specifically stated otherwise in the listing. Your installer should verify compatibility and perform any required vehicle-specific configuration.
Will the DB3 work with any vehicle?
No. DB3 compatibility and available functions depend on the specific year, make, model and vehicle configuration.
Does the Viper 5305V include remote start?
Yes. The 5305V is a combined remote-start and vehicle-security system when installed in a compatible vehicle.
What is the range of the Viper 5305V?
The Viper 5305V is rated for up to 1/4-mile remote range under ideal conditions. Real-world range varies according to interference, buildings, installation and surroundings.
Is the Viper 5305V a 2-way alarm?
Yes. Its primary LCD transmitter supports 2-way communication, providing command confirmation and supported system feedback.
Does this bundle include GPS tracking?
No. The DB3 is a vehicle interface module, not a GPS tracker. Compatible Viper SmartStart Pro hardware must be added separately if connected GPS functionality is desired.
Does the Viper 5305V work with SmartStart Pro?
The 5305V is compatible with Viper SmartStart when equipped with appropriate additional SmartStart hardware and service.
Can I install the Viper 5305V and DB3 myself?
Professional installation is required/recommended for this package. The DB3 may require vehicle-specific firmware, and the remote-start system must be correctly integrated with the vehicle’s ignition, safety, security and data systems.
Will I need any other parts?
Possibly. The included DB3 does not guarantee that no additional components are required. Vehicle-specific interfaces, relays, accessories or other hardware may be necessary.
Get Viper 2-Way Security, Remote Start and Vehicle Integration in One Bundle
The Viper 5305V 2-Way Car Security and Remote Start System with Directed DB3 Databus Interface Module packages two important parts of a modern remote-start installation together.
The 5305V provides 2-way LCD communication, up to 1/4-mile range, remote start, keyless-entry capability and aftermarket vehicle security, while the included DB3 provides additional integration capability for supported vehicles.
For the right application, this renewed bundle can offer considerably better value than purchasing the components separately.
Just verify your vehicle first.
Because the best remote starter is one that actually starts your car.
There are no reviews yet.