24″ + 18″ Front Wiper Blades for 2002, 2004–2008 Toyota Corolla & 2000–2003 Toyota Sienna

Wiper Blade Specifications

Toyota Corolla Fitment

According to the supplied manufacturer/seller application data, these 24-inch and 18-inch front wiper blades are compatible with the following Toyota Corolla model years:

What About the 2003 Toyota Corolla?

The supplied application specifically lists:

2002, 2004, 2005, 2006, 2007 and 2008

but does not list:

2003 Toyota Corolla.

Because windshield-wiper fitment can vary by vehicle application and connector, we would not add the missing model year without confirming it through a vehicle-specific fitment catalog.

If you own a 2003 Corolla, verify the required blade dimensions and wiper-arm connection before purchasing this particular set.

Toyota Sienna Fitment

The supplied application data lists these wipers for:

This covers the listed 2000–2003 Toyota Sienna applications using the compatible U/J-hook connection.

What’s Included?

The package contains:

1 × 24-inch driver-side windshield wiper

1 × 18-inch passenger-side windshield wiper

This provides both front blades in a single package.

A rear wiper blade is not included.

24-Inch Driver-Side Wiper

The larger blade measures:

24 inches

or approximately:

610mm.

It is intended for the driver side on the listed compatible applications.

The longer driver-side blade provides greater coverage across the driver’s primary field of view.

18-Inch Passenger-Side Wiper

The passenger-side blade measures:

18 inches

or approximately:

457mm.

The difference between the driver- and passenger-side lengths is intentional.

Vehicle manufacturers select blade sizes according to:

• Windshield shape
• Wiper pivot locations
• Blade overlap
• Cowl clearance
• A-pillar clearance
• Required wiping area

Installing a longer passenger blade does not necessarily improve visibility and can cause interference.

Frameless Beam Construction

These replacement wipers use a:

frameless beam design

instead of the articulated external frame found on traditional conventional blades.

Beam construction provides a continuous supporting structure along the wiping edge.

Potential advantages include:

• Consistent windshield contact
• Reduced exposed hardware
• Lower aerodynamic profile
• Fewer external joints
• Reduced snow and ice accumulation around frame pivots

Natural-Rubber Wiping Edge

The blades use a:

natural-rubber squeegee

designed for regular automotive windshield use.

Wiper rubber is continuously exposed to:

• Rain
• Heat
• Cold
• UV
• Washer fluid
• Dirt
• Road salt
• Windshield contamination

The seller describes the wiping material as designed for all-season operation across hot and cold conditions.

Actual service life will vary according to climate and vehicle use.

Designed for U/J-Hook Arms

These blades are intended for compatible:

U/J-hook wiper arms.

This traditional hook-style connection is commonly found on older Toyota applications.

Hook-style replacement generally provides straightforward installation without requiring extensive adapter configuration.

Verify the Wiper Arm Before Ordering

Correct blade length does not guarantee correct fitment.

Before purchasing, confirm that your Corolla or Sienna uses the supported:

U/J-hook connection.

Wiper fitment can depend on:

• Model year
• Vehicle model
• Wiper-arm connection
• Blade length
• Windshield application

If the vehicle has been modified or the wiper arms have previously been replaced, physically inspect the connection before ordering.

Easy Wiper Installation

For a compatible hook-style wiper arm, replacement is typically straightforward.

The basic process is:

1. Turn the vehicle and wipers off.
2. Raise the driver-side wiper arm.
3. Rotate the existing blade.
4. Release it from the hook.
5. Slide the old blade off.
6. Align the new blade connector.
7. Slide the hook into the new blade.
8. Confirm that it locks securely.
9. Lower the blade carefully.
10. Repeat on the passenger side.

Always follow the instructions supplied with the blades.

Protect Your Windshield

Place a folded towel against the windshield while replacing each wiper.

Once the old blade is removed, the spring-loaded metal arm is exposed.

If it slips and snaps against the glass, it can potentially chip or crack the windshield.

The towel is optional only if you’ve been looking for an expensive excuse to replace perfectly good automotive glass.

Test the Blades After Installation

After both blades are installed:

1. Apply windshield washer fluid.
2. Operate the wipers at low speed.
3. Confirm smooth movement.
4. Check windshield contact.
5. Verify that the blades do not collide.
6. Increase the wiper speed.
7. Confirm both connectors remain secure.

Look for:

• Streaking
• Chatter
• Skipping
• Blade lift
• Interference

Why Replace Both Front Wipers Together?

Both front blades are normally exposed to the same:

• Sunlight
• Heat
• Rain
• Snow
• Ozone
• Age

If one blade has deteriorated significantly, the other may not be far behind.

This two-piece package allows both front wiping surfaces to be refreshed during the same service.

Signs Your Corolla or Sienna Needs New Wipers

Common symptoms include:

• Windshield streaking
• Smearing
• Chattering
• Squeaking
• Skipping
• Cracked rubber
• Torn wiping edges
• Missed sections
• Poor wet-weather visibility

Do not wait until a heavy rainstorm to discover that the wiping edge has hardened.

Clean the Windshield Before Installing New Wipers

Dirty glass can make brand-new blades perform poorly.

Before installation, clean away:

• Bugs
• Road film
• Dirt
• Grease
• Tree sap
• Wax residue
• Silicone residue

Contaminated glass can cause:

• Chatter
• Streaking
• Smearing
• Premature blade contamination

Inspect the Toyota Wiper Arms

While replacing the blades, inspect each wiper arm.

Look for:

• Corrosion
• Bent metal
• Weak spring pressure
• Damaged hooks
• Loose mounting hardware

A new blade cannot compensate for a bent arm or inadequate spring tension.

Check the Windshield Washer System

This is also a good time to inspect:

• Washer-fluid level
• Washer pump
• Washer hoses
• Spray nozzles
• Nozzle alignment

A functioning washer system is particularly important when removing bugs, road film and winter contamination.

All-Season Wiper Performance

These blades are marketed for all-season operation.

That includes typical driving conditions such as:

• Rain
• Summer heat
• Cold weather
• Highway spray
• Light snow

The frameless structure also eliminates many exposed frame pivots where snow can accumulate.

Winter Wiper Care

A beam wiper is still not an ice scraper.

Before operating the blades in freezing weather:

1. Defrost the windshield.
2. Remove heavy snow.
3. Free frozen blades from the glass.
4. Remove major ice accumulation.

Trying to break frozen blades loose with the wiper motor can damage:

• Wiper blades
• Arms
• Linkage
• Wiper motor

Summer Wiper Care

Hot windshield temperatures and UV exposure can gradually harden wiping material.

Inspect the blades periodically for:

• Cracks
• Hardening
• Deformation
• Uneven wiping

Wipers age even when they aren’t being used frequently.

Beam Wipers vs. Conventional Wipers

Conventional Wiper

Uses an:

articulated external frame

with several individual pressure points.

Beam Wiper

Uses an:

integrated flexible support structure

along the blade.

Potential beam-blade advantages include:

• Lower aerodynamic profile
• Fewer exposed joints
• More continuous windshield contact
• Reduced frame-related snow buildup

This Toyota replacement set uses the beam-style approach.

Are These Toyota OEM Wiper Blades?

No.

These should be marketed as:

aftermarket replacement windshield wiper blades for compatible Toyota applications.

The supplied product description uses the phrase:

“OEM quality.”

That should not be interpreted as meaning these blades are manufactured or supplied by Toyota.

Unless the manufacturer provides documentation establishing a specific OEM certification, they should not be advertised as:

• Genuine Toyota
• Toyota OEM
• Toyota factory blades

A more defensible description is:

OEM-style aftermarket replacement wipers.

Corolla and Sienna Fitment Makes This Set Different

Many aftermarket wipers are marketed primarily by blade dimensions.

This product is more useful as a vehicle-specific listing because it combines:

24-inch driver blade + 18-inch passenger blade + U/J-hook connection

for the listed Toyota applications.

That gives shoppers a more specific replacement option than simply searching for two individual wiper sizes.

Who Should Buy These Toyota Wiper Blades?

This set is intended for owners of compatible listed:

Toyota Corolla

and:

Toyota Sienna

applications requiring 24-inch and 18-inch front wipers with a compatible U/J-hook connection.

It is particularly suited to drivers looking for:

• Both front wipers in one package
• Beam-style construction
• Natural-rubber wiping edges
• All-season operation
• Straightforward hook-arm installation
• Vehicle-specific replacement

Why Buy This 24″ + 18″ Toyota Wiper Set?

Key features include:

• 24-inch driver-side wiper
• 18-inch passenger-side wiper
• Two-blade package
• Listed Toyota Corolla fitment
• Listed Toyota Sienna fitment
• Frameless beam construction
• Natural-rubber wiping edge
• U/J-hook compatibility
• All-season design
• Straightforward replacement

Important Fitment Note

The seller lists this set for:

2002 and 2004–2008 Toyota Corolla

and:

2000–2003 Toyota Sienna.

The supplied application does not list the 2003 Toyota Corolla.

Before ordering, verify:

Year → Make → Model → Wiper Arm Connection

Do not select windshield wipers by blade length alone.

Related Pro Street Guides

For a broader explanation of beam, conventional, silicone and water-repellent wipers:

Best Windshield Wiper Blades for Clearer Drives

For additional advice on buying vehicle-specific replacement parts:

Shop Car Parts by Vehicle the Smart Way