Husky Liners WeatherBeater Floor Mats for 2016–2019 Chevrolet Volt – 98281

Important Fitment Notes

• Fits the second-generation 2016–2019 Chevrolet Volt.
• Does not fit the first-generation 2011–2015 Chevrolet Volt.
• Designed for vehicles with factory carpeted flooring.
• Includes passenger-compartment liners only.
• Does not include a cargo-area liner.
• Confirm part number 98281 and the vehicle configuration before ordering.

If you’re researching the car as well as its interior accessories, the 2017 Ford Fusion Energi review includes a useful Chevrolet Volt electric-range comparison.

What Comes in the Box?

The Husky Liners 98281 package includes:

• One driver-side front floor liner
• One passenger-side front floor liner
• Two second-row floor liners
• Black finish
• Four pieces total

ProGard Material

Husky’s ProGard material is engineered to balance flexibility with long-term resistance to curling, cracking, and wear. It feels less rigid underfoot than some hard-shell floor liners while retaining the raised shape necessary to contain spills.

The formula is advertised as being free from latex, PVC, cadmium, lead, and other listed harmful substances. That makes it a practical choice for a daily-driven Volt carrying children, pets, groceries, work equipment, or whatever else inevitably attacks a clean interior.

Laser-Measured FormFit Protection

WeatherBeater liners use Husky’s FormFit design process, which starts with a three-dimensional scan of the vehicle’s floor. The resulting molded contours follow the shape of the Volt’s footwells instead of leaving the large exposed gaps commonly found around universal mats.

Raised FormFit Edge sections help contain:

• Rainwater
• Melting snow
• Road salt
• Mud and sand
• Coffee and drink spills
• Loose dirt and debris

Containment matters in the Volt because liquid left in the carpet can produce stains, odors, and corrosion beneath the visible interior. Interior damage is much less entertaining when electrical connectors and wiring are involved.

For more cabin-maintenance information, see Pro Street’s complete dashboard repair guide and OEM replacement-parts guide.

StayPut Nibs Help Prevent Movement

The underside uses Husky’s StayPut nibs to grip the factory carpet and resist sliding. Correct positioning is especially important on the driver’s side, where a moving mat could interfere with pedal travel.

After installation, verify that:

1. The factory carpet is clean and free of stacked mats.
2. The driver’s liner sits flat against the floor.
3. Any factory retention points are properly engaged.
4. The liner doesn’t contact the accelerator or brake pedal.
5. Both pedals return freely through their complete range.

Never place the Husky liner on top of another floor mat. More layers don’t mean more protection; they mean more opportunities for something to migrate toward the pedals.

Easy Installation

Installation requires no trimming or permanent modification:

1. Remove the original carpet mats.
2. Vacuum loose dirt from the vehicle floor.
3. Position each WeatherBeater liner in its corresponding footwell.
4. Engage the available factory retention points.
5. Press around the edges until the liner follows the floor contours.
6. Check driver-side pedal clearance before driving.

Husky describes WeatherBeater installation as a simple, tool-free process. The manufacturer provides additional product and warranty information on its official WeatherBeater page.

Cleaning and Care

Remove the liners from the car before washing them. Shake out loose debris, rinse them with water, and use mild automotive soap when necessary. Allow the liners to dry before reinstalling them.

Avoid applying greasy dressings or slippery protectants. A glossy liner might photograph nicely, but introducing a slick surface beneath the pedals is an impressively bad trade.

For additional vehicle-maintenance ideas, browse Pro Street’s automotive repair and maintenance guides or its coverage of current truck and vehicle styling trends.

Key Specifications

Frequently Asked Questions

Do Husky Liners 98281 fit a 2015 Chevrolet Volt?

No. The 2015 Volt belongs to the previous vehicle generation and uses a different floor shape. Part 98281 is intended for the 2016–2019 Chevrolet Volt.

Will these liners fit both the Volt LT and Premier?

Yes, the stated application covers 2016–2019 Chevrolet Volt models, including LT and Premier trims. Verify the part number against the seller’s current vehicle selector before purchase.

Does this package include a cargo liner?

No. This four-piece set protects the front and second-row passenger floors. A rear cargo liner must be purchased separately.

Can these liners be installed over the factory mats?

No. Remove the original mats before installation. Stacking floor mats can prevent the liner from seating correctly and may create a pedal-safety hazard.

Are the liners waterproof?

The liner material won’t absorb water, and the raised edges are designed to contain ordinary spills, snowmelt, and mud. However, no removable liner should be treated as a sealed bathtub.

Are these mats rigid?

WeatherBeater liners are molded but remain flexible enough for straightforward installation and removal. The ProGard material is designed to resist curling and cracking while maintaining a softer feel underfoot.

What warranty is included?

Husky Liners backs WeatherBeater products with a limited lifetime warranty for the original purchaser, subject to the company’s conditions and exclusions. Review the current Husky Liners warranty terms before purchase.

Final Verdict

The Husky Liners WeatherBeater 98281 set is a strong interior-protection upgrade for any 2016–2019 Chevrolet Volt used through wet winters, muddy commutes, family duty, or normal daily driving.

Its vehicle-specific contours, raised spill barriers, flexible ProGard construction, and carpet-gripping nibs offer substantially better coverage than flat universal mats. Just confirm that you have a second-generation Volt, remove the original mats, and check pedal clearance after installation.