GReddy 17010099 GRacer Front Lip Spoiler – 2017–2020 Toyota 86 ZN6

GReddy 17010099 Product Specifications

Vehicle Fitment: What Does GReddy 17010099 Fit?

Important fitment information: The GReddy 17010099 is designed for the later Toyota 86 front bumper. It is not the correct direct-fit front lip for the original 2013–2016 Scion FR-S bumper or the 2013–2016 Subaru BRZ bumper.

Owners of earlier vehicles should look for the appropriate GReddy GRacer front lip designed specifically for their bumper configuration.

A More Aggressive Toyota 86 Without a Complete Body Kit

One of the biggest advantages of the GReddy 17010099 is its relatively subtle design.

The front lip follows the factory bumper while adding a stronger lower edge. The result is a more planted visual stance that complements aftermarket wheels, lowered suspension, and other carefully selected exterior modifications.

A complete widebody conversion can dramatically transform the appearance of an FR-S, BRZ, or Toyota 86, but it often requires more extensive modifications and significantly greater expense.

For enthusiasts interested in the history of aggressive styling on this platform, our coverage of GReddy’s FR-S Rocket Bunny aero kit at SEMA highlights how GReddy helped bring Japanese widebody styling into the mainstream performance scene.

The GRacer front lip takes a different approach. It provides a clean, factory-compatible appearance without the dramatic fender modifications associated with a widebody build.

Does the GReddy Front Lip Improve Aerodynamics?

A front lip spoiler changes the shape of the leading edge of the vehicle, influencing the way air approaches the front bumper and underbody.

GReddy describes the GRacer front skirt as a design intended to help manage airflow beneath the bumper.

However, it is important to distinguish aerodynamic design from measured performance.

GReddy does not publish a verified downforce figure, drag coefficient improvement, or lap-time reduction for the 17010099.

That means buyers should view this part primarily as a well-designed exterior styling upgrade with aerodynamic intent rather than a guaranteed increase in track performance.

If you’re building a Toyota 86 for high-speed driving, our Car Body Kit Guide for Street and Track Builds explains why front lip design, ride height, ground clearance, and the balance of the complete aero package matter.

Why Urethane Is a Good Material for a Street-Driven Front Lip

Front lip spoilers are exposed to road debris, steep driveways, parking blocks, and occasional contact with uneven pavement.

GReddy uses urethane for the 17010099 because the material offers flexibility and resistance to minor impacts.

Compared with a rigid fiberglass spoiler, a urethane lip can tolerate some deformation without immediately cracking.

That doesn’t make it indestructible. Severe impacts, improper mounting, and repeated scraping can still damage the part or the factory bumper.

The 30mm lower profile also makes checking ground clearance particularly important on lowered Toyota 86 builds.

Installation Tips for the GReddy 17010099

The GReddy 17010099 is designed to mount to the original Toyota 86 front bumper using double-sided tape and two tapping screws.

Before installation, inspect the bumper and test-fit the lip to verify alignment.

Clean the mounting surfaces thoroughly and follow the adhesive manufacturer’s preparation and curing recommendations.

Do not permanently secure the spoiler until both sides are aligned correctly and the part sits evenly against the bumper.

After installation, check the vehicle’s approach angle and front-end clearance.

For owners considering additional bodywork, our Car Body Kit Guide also covers paint preparation, hardware selection, and how to avoid common installation mistakes.

Frequently Asked Questions

Does GReddy 17010099 fit a 2017 Toyota 86?

Yes. It is designed for the facelifted Toyota 86 ZN6 front bumper.

Does it fit a 2015 Scion FR-S?

No. The earlier Scion FR-S uses a different front bumper and requires an application-specific lip, such as GReddy 17010098.

Does it fit a 2016 Subaru BRZ?

No. GReddy lists a separate front lip, part number 17060060, for the earlier BRZ bumper.

Is the GReddy 17010099 painted?

No. It is supplied in unpainted black urethane.

Does it require drilling?

GReddy specifies installation using two tapping screws and double-sided tape without drilling new holes.

How much lower does it make the front bumper?

Approximately 30mm lower, with an additional 45mm of forward extension.

Does this front lip add horsepower?

No. It is an exterior aerodynamic styling component, not an engine performance modification.

Upgrade Your Toyota 86 With Genuine GReddy Styling

The GReddy 17010099 GRacer Front Lip Spoiler is designed for enthusiasts who want to improve the appearance of their Toyota 86 without replacing the factory bumper.

Its flexible urethane construction, application-specific shape, and aggressive lower profile make it a practical option for street-driven and track-inspired builds.

Upgrade your 2017–2020 Toyota 86 with the GReddy 17010099 and bring authentic Japanese performance styling to your front bumper.