Goodyear 1060408 Vehicle Fitment Chart
The following applications are based on the supplied manufacturer fitment information. Exact compatibility depends on engine, accessory configuration, and belt position.
Toyota and Lexus
| Years | Make | Model |
|---|---|---|
| 1999–2006 | Toyota | Sienna |
| 1998–2004 | Toyota | Avalon |
| 1999–2008 | Toyota | Solara |
| 1998–2003 | Lexus | ES300 |
| 2004–2006 | Lexus | ES330 |
| 1999–2003 | Lexus | RX300 |
| 2004–2006 | Lexus | RX330 |
Nissan and INFINITI
| Years | Make | Model |
|---|---|---|
| 1991–1993 | Nissan | NX |
| 1993–1996 | Nissan | Tsuru |
| 1995–1998 | Nissan | 200SX |
| 1996–1998 | Nissan | Lucino |
| 1993 | INFINITI | G20 |
Ford and Mercury
| Years | Make | Model |
|---|---|---|
| 1984 | Ford | Tempo |
| 1984 | Ford | Topaz (verify catalog designation) |
| 1984 | Mercury | Topaz |
| 1985 | Ford | Bronco II |
| 1985–1987, 1989–1991 | Ford | Ranger |
| 1996–1998 | Ford | A9513 |
| 1996–1998 | Ford | AT9513 |
| 1997–1998 | Ford | AT9522 |
Volkswagen, SEAT, Eagle, and Isuzu
| Years | Make | Model |
|---|---|---|
| 1988–1989 | Eagle | Medallion |
| 1989 | Isuzu | I-Mark |
| 1996 | Volkswagen | Jetta |
| 2003–2007 | Volkswagen | Polo |
| 2003–2009 | SEAT | Cordoba |
| 2003–2015 | SEAT | Ibiza |
Volvo and International Commercial Trucks
| Years | Make | Model |
|---|---|---|
| 1997–1998 | Volvo | ACL |
| 1998–2001 | Volvo | WG |
| 1999 | International | 5000 |
| 1999 | International | 5070 |
| 1999 | International | F5070 |
| 2000–2002 | International | 5500i |
| 2000–2002 | International | 5600i |
| 2000–2002 | International | 5900i |
Fitment Warning: These are manufacturer-advertised model-year applications, not confirmation that every engine or trim uses this belt. Multiple accessory drive belts may be fitted to the same vehicle. Verify the original part number, engine, belt routing, and accessory configuration before ordering.
Goodyear 1060408 Belt Specifications
| Specification | Details |
|---|---|
| Manufacturer | Goodyear Belts |
| Part Number | 1060408 |
| Belt Type | Multi-V Serpentine Belt |
| Number of Ribs | 6 |
| Nominal Length | 40.8 inches |
| Approximate Metric Length | 1,036 mm |
| Construction | Heat- and abrasion-resistant reinforced belt |
| Primary Function | Engine accessory power transmission |
| Product Category | Automotive Replacement Drive Belt |
Why Replace a Worn Serpentine Belt?
Your engine’s serpentine belt transfers rotational power from the crankshaft to important accessories.
Depending on the vehicle, these may include the alternator, air conditioning compressor, hydraulic power steering pump, water pump, or other components.
As the belt ages, exposure to heat, repeated flexing, and normal wear can affect its ability to transmit power reliably.
Common warning signs include:
- Squealing or chirping noises during startup
- Visible rib wear or missing rib sections
- Fraying along the belt edges
- Belt slipping or tracking incorrectly
- Excessive vibration around the tensioner
- Battery charging problems
- Reduced hydraulic power steering assistance
- Air conditioning performance problems
- Engine overheating if the affected belt drives a cooling component
Not every squealing belt needs replacement. Worn pulleys, failing tensioners, contamination, and accessory bearing problems can create similar symptoms.
If you’re diagnosing a belt-related noise, our guide to testing alternator output with a multimeter can help determine whether the charging system is operating correctly before you replace additional components.
Engineered for Heat, Load, and Daily Reliability
Modern engine accessory drive systems experience constant changes in rotational speed, temperature, and mechanical load.
The Goodyear 1060408 uses reinforced construction designed to handle these demands while maintaining reliable contact with compatible pulleys.
Its six-rib Multi-V profile helps distribute driving force across the pulley surface, supporting smooth operation and reducing unwanted slippage when the drive system is in good condition.
For older Toyota and Lexus applications, replacing an aging accessory belt is particularly important because belt wear may occur alongside deteriorating pulleys or tensioning components.
Serpentine Belt Replacement: What to Check First
Before replacing the Goodyear 1060408 belt, inspect the entire accessory drive system.
Check the tensioner, idler pulleys, alternator pulley, and other belt-driven accessories for wear, damage, or misalignment.
Confirm the correct belt routing diagram for the engine and verify that the replacement belt matches the original drive position.
For a practical walkthrough covering preparation, safe removal, routing, and final inspection, see our DIY serpentine belt replacement guide.
During installation:
- Allow the engine to cool completely.
- Disconnect or isolate electrical power when required by the service procedure.
- Identify and document the original belt routing.
- Release belt tension using the appropriate service method.
- Inspect the pulleys and tensioner before fitting the replacement belt.
- Seat all six ribs correctly in the pulley grooves.
- Restore proper belt tension according to the vehicle’s service specifications.
- Start the engine and verify correct belt tracking and quiet operation.
Never force a belt onto a pulley with a screwdriver or sharp tool, as this may damage its internal reinforcement.
Why Choose Goodyear Replacement Belts?
Goodyear’s history in rubber technology and automotive belt engineering supports a broad range of replacement drive belt applications.
The Goodyear 1060408 is designed to deliver reliable accessory power transmission for compatible vehicles while resisting the heat and abrasion commonly encountered in engine compartments.
Its reinforced construction makes it a practical choice for routine maintenance and accessory drive repairs.
For drivers maintaining an older vehicle, preventive belt replacement can help reduce the risk of a roadside breakdown and protect the operation of critical engine accessories.
Buy Goodyear 1060408 Serpentine Belt at Pro Street Online
Restore dependable accessory drive performance with the Goodyear Belts 1060408 6-Rib, 40.8-Inch Serpentine Belt.
Designed for select Toyota, Lexus, Nissan, Ford, Volkswagen, Volvo, and other automotive and commercial applications, this replacement belt combines Goodyear engineering with heat- and abrasion-resistant construction.
Find replacement belts and related automotive maintenance components at Pro Street Online.
There are no reviews yet.