FRANXI 9005 H11 LED Bulb Combo – 32,000LM, 6000K, 4 Pack

Advertised 32,000-Lumen Output

FRANXI lists this kit at 32,000 lumens, while its feature description rates each bulb at 16,000 lumens and 60 watts. That indicates the advertised 32,000-lumen and 120-watt figures apply to each two-bulb pair rather than all four bulbs combined. Current listings repeat the same per-bulb specifications.

These are manufacturer ratings rather than independently tested measurements. Actual road illumination depends on the housing optics, operating voltage, bulb orientation, lens condition, and beam adjustment.

6000K Cool-White Light

The 6000K color temperature produces a clean white beam with less blue tint than many 6500K bulbs. This provides a modern appearance while maintaining reasonably neutral color reproduction.

Cool-white output can improve perceived contrast on dry roads, but beam control remains more important than color or raw brightness. Read our LED headlight bulb review and buying guide before converting a halogen lighting system.

Compact 1:1-Style Installation

Each FRANXI bulb combines the LED chips, cooling system, and driver into one compact assembly. No separate ballast, external driver, or additional wiring connector is required.

Installation Procedure

1. Switch off the vehicle’s lights.
2. Allow the original bulbs to cool.
3. Remove the factory 9005 and H11-family bulbs.
4. Install each FRANXI bulb into the matching socket.
5. Connect the factory electrical plugs.
6. Verify clearance around the cooling fans.
7. Reinstall the dust covers when possible.
8. Test every lighting position.
9. Inspect the beam against a wall.

Installation may be quick when the housings are accessible. Vehicles requiring bumper, airbox, battery, or wheel-liner removal will naturally take longer. “Plug and play” has never convinced an engine bay to provide more space.

Active Fan Cooling

The aviation-grade aluminum body works as a heat sink, while the integrated 12,000-RPM fan moves heat away from the LED chips. Proper temperature control can reduce output loss and help extend component life.

For reliable operation:

• Do not obstruct the fan intake
• Keep wiring away from the fan blades
• Confirm adequate space behind the housing
• Avoid forcing an undersized dust cover into place
• Inspect the fan if a bulb begins flickering or dimming

Smart IC Driver

Built-in smart IC drivers are designed to work with approximately 99% of vehicle electrical systems. They may help prevent:

• Bulb-out warnings
• Flickering
• Delayed illumination
• Radio interference
• Inconsistent output

The compatibility percentage is a manufacturer estimate. Certain vehicles may require a separate CANbus decoder, load resistor, or anti-flicker module.

Specifications

Vehicle Compatibility Checklist

Confirm the following before purchase:

• Your vehicle uses both 9005/HB3 and H11-family bulbs
• The factory system is not integrated LED or HID
• The bulb sockets and locking tabs match
• The housing provides enough fan clearance
• Dust covers can be reinstalled correctly
• The vehicle does not require special retaining adapters
• Additional CANbus components are available if needed

Online fitment tools are helpful, but they can contain errors or omit trim-level differences. Physical bulb numbers remain the better reference.

Off-Road and Road-Use Notice

This product is marketed as an off-road or accessory-light kit. Confirm local regulations before installing it in road-going headlamps.

NHTSA has stated that LED replacement light sources are not currently permitted in replaceable-bulb headlamps originally designed around regulated halogen sources. Fog, auxiliary, and off-road lighting can fall under different rules depending on location and use.

If the bulbs are installed in headlamp positions, inspect the cutoff and follow our guide on how to aim headlights. A powerful bulb with a poor pattern creates glare, not useful visibility.