Additional advertised vehicle: Jeep Grand Cherokee. Exact model-year and engine compatibility for this part must be confirmed before purchase.
Important fitment notice: The supplied compatibility ranges are not confirmation that every engine, trim, or production configuration uses this gasket. Pentastar engines underwent revisions across model years, and related 3.2L and 3.6L applications may require different sealing components. Always verify the exact engine, VIN, and FEL-PRO part number.
Engineered for Pentastar V6 Oil Leak Repairs
The Pentastar V6 engine family is widely used in Jeep SUVs, Dodge passenger cars, Chrysler vehicles, and Ram trucks.
These engines rely on valve cover gaskets to contain lubricating oil around the cylinder head and valvetrain.
Over time, repeated heating and cooling cycles, vibration, and exposure to motor oil can cause original sealing components to lose flexibility.
When the gasket deteriorates, oil may begin escaping around the valve cover perimeter, resulting in visible oil residue, burning oil odors, and contamination of nearby engine components.
The FEL-PRO VS 50805 R Valve Cover Gasket Set is designed to address these common problems with conformable sealing material engineered for automotive repair environments.
Replacing a deteriorated gasket helps restore oil containment while allowing an otherwise serviceable valve cover to remain in use.
Proprietary Cork-Rubber Construction
One of the distinguishing characteristics of the FEL-PRO VS 50805 R is its proprietary cork-rubber formulation.
This material is designed to provide the flexibility and compressibility needed to maintain sealing contact between the valve cover and cylinder head.
Its conformable construction helps accommodate minor irregularities in the mating surfaces, which can be particularly beneficial when repairing older engines.
When properly installed, the gasket helps create a dependable barrier against external engine oil leakage.
Common Symptoms of a Failing Pentastar Valve Cover Gasket
A deteriorating valve cover gasket may initially produce minor oil seepage before developing into a more noticeable leak.
Common symptoms include:
-
Visible Engine Oil Leaks: Oil accumulating along the valve cover perimeter or running down the cylinder head.
-
Burning Oil Smell: Oil contacting hot exhaust components can produce a noticeable odor.
-
Oil Around Ignition Components: Depending on the engine configuration, oil may collect near ignition coils or spark plug wells.
-
Gradually Decreasing Oil Levels: Persistent leakage can contribute to oil loss between maintenance intervals.
-
Dirty Engine Compartment: Escaping oil attracts dust and debris, making future leak diagnosis more difficult.
These symptoms can also originate from the oil filter housing, oil cooler assembly, or other engine sealing components. Confirm the source before replacing the valve cover gaskets.
Why Replace a Worn Jeep or Ram Valve Cover Gasket?
A leaking valve cover gasket can create more than a cosmetic problem.
Escaping engine oil may contaminate nearby wiring, ignition components, and other engine parts. In some circumstances, leaking oil can reach hot exhaust surfaces and create smoke or burning odors.
Continued leakage can also contribute to reduced engine oil levels if the problem is ignored.
Replacing a worn gasket helps restore the intended seal between the valve cover and cylinder head.
For Jeep Grand Cherokee, Dodge, Chrysler, and Ram owners maintaining higher-mileage vehicles, timely gasket replacement is a practical way to address oil leaks and support long-term engine reliability.
Installation Tips for Pentastar Valve Cover Gaskets
Proper installation is essential for dependable sealing performance.
-
Remove the engine covers, intake components, ignition coils, and other parts required to access the valve covers according to the factory service procedure.
-
Carefully remove the original gasket and clean the mating surfaces without scratching the cylinder heads.
-
Inspect the valve covers for cracks, distortion, and damaged sealing channels.
-
Confirm that the replacement gasket matches the original engine configuration.
-
Position the gasket correctly and reinstall the valve cover.
-
Follow the manufacturer’s tightening sequence and torque specifications.
-
Apply RTV sealant only at designated locations specified in the factory service instructions.
-
Start the engine and inspect the repaired area for leaks.
Depending on the vehicle, upper intake manifold removal may be required for access. Inspect any disturbed intake seals and replace them as specified by the service procedure.
Why Choose FEL-PRO VS 50805 R?
FEL-PRO replacement gaskets are engineered for the challenges encountered during automotive engine repairs.
The VS 50805 R combines application-specific construction, conformable sealing material, and repair-focused engineering to help restore dependable oil containment.
Rather than relying on a generic gasket, this product is intended to meet the sealing requirements of designated Pentastar V6 applications.
For professional technicians and DIY mechanics alike, FEL-PRO offers a practical solution for repairing common valve cover oil leaks.
Buy FEL-PRO VS 50805 R Valve Cover Gasket Set
Keep your compatible Jeep Grand Cherokee, Dodge, Chrysler, or Ram engine properly sealed with the FEL-PRO VS 50805 R Engine Valve Cover Gasket Set.
Engineered for durability, conformability, and dependable sealing performance, this replacement gasket helps restore engine oil containment and reduce external oil leaks.
Shop replacement engine gaskets and maintenance components at Pro Street Online.
Related Engine Maintenance Resources
For additional information about engine oil leaks, gasket replacement, and maintaining higher-mileage vehicles, explore the automotive repair articles at My Pro Street Online.
There are no reviews yet.