FEL-PRO VS 50639 R-1 Valve Cover Gasket Set for Ford Fusion, Escape, Focus & Transit Connect

Key Features and Benefits

• Proprietary Cork-Rubber Formulation: Designed to maintain flexibility and conform to minor sealing surface imperfections.

• Professional-Grade Oil Sealing: Helps prevent external engine oil leaks around the valve cover perimeter.

• Application-Specific Construction: Engineered for designated Ford engine applications rather than universal fitment.

• Designed for Imperfect Surfaces: Helps compensate for minor irregularities commonly encountered during engine repairs.

• Durable Sealing Performance: Manufactured to withstand normal engine operating temperatures, vibration, and oil exposure.

• Repair-Focused Gasket Set: FEL-PRO includes the sealing components required for the specified repair unless otherwise noted.

• Real-World Tested: FEL-PRO validates its replacement sealing products through vehicle testing.

• Trusted Aftermarket Quality: Manufactured by an established supplier of automotive engine gaskets and sealing components.

Vehicle Compatibility and Fitment

The FEL-PRO VS 50639 R-1 is advertised for select Ford vehicles across the following model-year ranges.

Important Fitment Notice: These are supplier-advertised model-year ranges, not confirmation that every engine and trim within those years uses this gasket.

Ford offered several different engine configurations across these vehicles, including naturally aspirated four-cylinder, EcoBoost turbocharged, hybrid, and V6 engines. Valve cover gasket designs vary by engine family.

Verify the exact year, make, model, engine displacement, engine code, and FEL-PRO part number before purchasing.

The supplier’s additional fitment information is truncated and has not been included.

Designed for Ford Fusion and Escape Engine Maintenance

Ford Fusion and Escape models are commonly used for commuting, family transportation, and everyday driving. Even properly maintained engines can develop oil leaks as their original sealing components age.

Valve cover gaskets are exposed to repeated heating and cooling cycles, which can gradually reduce gasket flexibility.

The FEL-PRO VS 50639 R-1 provides a practical repair solution for compatible Ford engines experiencing oil seepage around the valve cover.

Its conformable gasket material is designed to maintain sealing contact against minor surface imperfections that may develop over time.

For owners maintaining high-mileage Ford vehicles, replacing a deteriorated valve cover gasket can help reduce oil leakage and keep the engine compartment cleaner.

Proprietary Cork-Rubber Construction for Dependable Sealing

One of the primary features of the FEL-PRO VS 50639 R-1 is its proprietary cork-rubber formulation.

This material is designed to provide the flexibility and compressibility needed to maintain a reliable seal between the valve cover and cylinder head.

Unlike rigid sealing materials, a conformable gasket can accommodate minor variations in the mating surfaces while maintaining consistent contact.

This characteristic is particularly useful during repairs involving older engines where sealing surfaces may no longer be in factory-new condition.

When properly installed, the gasket helps create a secure barrier against external engine oil leakage.

Common Symptoms of a Failing Ford Valve Cover Gasket

A deteriorating valve cover gasket may initially produce minor oil seepage before developing into a more noticeable leak.

Common symptoms include:

• Visible Engine Oil Leaks: Oil accumulating around the valve cover perimeter or running down the cylinder head.

• Burning Oil Smell: Engine oil contacting hot exhaust components can produce a noticeable odor.

• Oil Around Ignition Components: Depending on the engine design, oil may collect near ignition coils or spark plug wells.

• Gradually Decreasing Oil Levels: Persistent leakage can contribute to oil loss between maintenance intervals.

• Dirty Engine Compartment: Escaping oil attracts dirt and debris, making future leak diagnosis more difficult.

These symptoms can also result from other engine oil leaks. Confirm the source before replacing the gasket.

Why Replace a Worn Ford Valve Cover Gasket?

A leaking valve cover gasket is more than a cosmetic concern.

Oil escaping from the cylinder head may contaminate nearby wiring, ignition components, and other engine parts. In some cases, leaking oil can reach hot exhaust surfaces and create smoke or burning odors.

Continued leakage can also contribute to reduced engine oil levels if the problem is ignored.

Replacing a worn gasket helps restore the intended seal while allowing the original valve cover to remain in service if it is undamaged.

For Ford owners maintaining older vehicles, timely valve cover gasket replacement is a practical way to address oil leaks and support long-term engine reliability.

Installation Tips for Ford Valve Cover Gaskets

Proper installation is essential for dependable sealing performance.

Begin by removing the ignition components, hoses, brackets, and other parts required to access the valve cover according to the factory service procedure.

Carefully remove the original gasket and clean the mating surfaces without scratching the cylinder head or damaging the valve cover.

Inspect the valve cover for cracks, distortion, and damaged sealing channels before installing the replacement gasket.

If the engine uses separate spark plug tube seals or bolt grommets, inspect those components and replace them as required. Confirm which parts are included in the FEL-PRO kit before beginning the repair.

Position the replacement gasket correctly and follow the manufacturer’s tightening sequence and torque specifications.

Some Ford engines require small amounts of RTV sealant at designated timing cover junctions. Follow the factory service instructions rather than applying sealant around the entire gasket.

Avoid overtightening valve cover fasteners, which can damage the gasket or valve cover.

After installation, start the engine and inspect the repaired area for leaks.

Why Choose FEL-PRO VS 50639 R-1?

FEL-PRO replacement gaskets are engineered for the challenges encountered during automotive engine repairs.

The VS 50639 R-1 combines application-specific construction, conformable sealing material, and repair-focused engineering to help restore dependable oil containment.

Rather than relying on a generic gasket, this product is intended to meet the sealing requirements of designated Ford engine applications.

For professional technicians and DIY mechanics alike, FEL-PRO offers a practical solution for repairing common valve cover oil leaks.

Buy FEL-PRO VS 50639 R-1 Valve Cover Gasket Set

Keep your compatible Ford Fusion, Escape, Focus, or Transit Connect properly sealed with the FEL-PRO VS 50639 R-1 Engine Valve Cover Gasket Set.

Engineered for durability, conformability, and dependable sealing performance, this replacement gasket helps restore engine oil containment and reduce external oil leaks.

Shop FEL-PRO replacement valve cover gaskets and engine maintenance components at Pro Street Online and get the parts you need for your next Ford engine repair.

Related Engine Maintenance Resources

A leaking valve cover gasket can lead to oil loss, engine compartment contamination, and burning oil odors. For additional troubleshooting and repair information, explore the automotive maintenance articles at My Pro Street Online.

For replacement engine gaskets, maintenance products, and additional automotive components, visit Pro Street Online.