Edge EAS EGT Starter Kit – Exhaust Gas Temperature Monitoring for Diesel Trucks and Towing

Designed for Diesel Trucks and Towing Applications

Diesel engines are frequently used in demanding applications involving heavy loads, long grades, and extended highway operation.

When towing a large trailer, the engine may operate under sustained load for longer periods than during ordinary commuting.

An EGT monitoring system allows the driver to observe how exhaust temperatures respond to these conditions.

The Edge EAS EGT Starter Kit is especially useful for owners of compatible diesel-powered trucks, including properly equipped Ford Power Stroke, Ram Cummins, and GM Duramax applications.

Vehicle compatibility ultimately depends on the installed Edge monitor and supported EAS configuration, rather than the truck’s make alone.

Compatible with Edge CS, CS2, CTS and CTS2 Systems

The Edge EAS EGT Starter Kit is intended to expand the capabilities of compatible Edge monitoring devices.

The supplied product title identifies CS, CS2, CTS, and CTS2 compatibility, while the description also references CTS3 support.

Advertised monitor families include:

• Edge CS.

• Edge CS2.

• Edge CTS.

• Edge CTS2.

• Edge CTS3, where supported by the specific EAS hardware and monitor configuration.

Because compatibility can vary by monitor generation, firmware, and accessory part number, confirm your exact Edge device before ordering.

This kit is an accessory to a compatible monitoring system, not a complete standalone EGT gauge.

Expandable Accessory System with Daisy-Chain Connectivity

One of the biggest advantages of Edge’s EAS platform is its expandable design.

Rather than requiring a separate dashboard display for every additional sensor, EAS allows supported accessories to connect through a shared system.

The daisy-chain configuration makes it possible to expand monitoring capabilities as your vehicle’s needs change.

Depending on the monitor and installed accessories, the system may support additional temperature sensors and other vehicle measurements.

EAS expansion advantages include:

• Centralized monitoring through a compatible Edge display.

• Support for additional compatible EAS accessories.

• Daisy-chain connections for supported modules.

• Potential for multiple EGT measurement locations.

• Reduced need for separate aftermarket gauges.

This makes the system particularly appealing to enthusiasts who want more detailed engine information without cluttering the dashboard.

Compare Exhaust Temperatures at Different Locations

Advanced diesel monitoring setups may use multiple EGT sensors to observe temperatures at different points in the exhaust system.

For example, a properly configured system may allow comparisons between pre-turbocharger and post-turbocharger exhaust temperatures.

These readings can provide additional information about engine and turbocharger operating conditions.

However, EGT values from different sensor locations should not be compared as though they represent identical measurements.

Pre-turbo and post-turbo temperatures naturally differ, and safe operating limits depend on the engine, exhaust system, and probe location.

Convenient Integration with Existing Edge Monitors

The EAS architecture simplifies the electronic connection between compatible sensors and Edge monitoring devices.

Once the hardware is correctly installed and configured, the Edge display can present EGT information alongside other supported vehicle parameters.

This provides a cleaner monitoring solution than installing multiple independent gauge displays.

The EAS electrical connection is designed for convenient integration, but installing an exhaust temperature probe may require drilling and tapping an appropriate exhaust manifold or exhaust pipe location. It should not be described as a completely tool-free installation.

For more diesel performance and automotive diagnostic information, visit My Pro Street Online automotive technical guides.

Edge EAS EGT Starter Kit Specifications

The supplied information does not identify an exact Edge part number or complete package inventory. Verify probe, module, wiring, fittings, and adapter contents before publishing a definitive included-parts list.

Why Exhaust Gas Temperature Matters for Diesel Engines

Exhaust gas temperature is an important operating parameter for turbocharged diesel engines.

When an engine produces more power under load, exhaust temperatures can increase as additional fuel is burned and more energy passes through the exhaust system.

Sustained high EGT can increase thermal stress on engine and turbocharger components.

Common situations that may raise EGT include:

• Towing heavy trailers uphill.

• Sustained acceleration under load.

• Aggressive performance tuning.

• Restricted intake or exhaust flow.

• Certain fuel-system or air-delivery problems.

• Extended operation at high engine load.

EGT monitoring can help drivers recognize these conditions, but readings must be interpreted alongside other vehicle data and the manufacturer’s operating recommendations.

There is no single universal maximum safe EGT for every diesel engine.

Edge EAS EGT Kit vs. Traditional Pyrometer Gauge

A traditional pyrometer uses a dedicated temperature gauge to display exhaust gas temperature.

The Edge EAS system instead integrates EGT data into a compatible digital monitor.

For drivers who already own a compatible Edge monitor, adding an EAS EGT accessory can be a convenient way to expand their monitoring capabilities.

Ideal Applications for the Edge EAS EGT Starter Kit

Heavy-Duty Diesel Towing

When towing a travel trailer, equipment trailer, or other heavy load, monitoring exhaust temperature can provide useful insight into sustained engine demand.

Tuned Diesel Trucks

Performance tuning can change fueling and boost behavior.

EGT monitoring helps drivers observe temperature trends under different operating conditions, although it does not establish whether a tune is safe.

Turbocharged Diesel Performance Builds

Drivers upgrading turbochargers, intake systems, or other engine components may want additional temperature data to evaluate operating conditions.

Daily-Driven Diesel Trucks

Even an otherwise stock diesel truck can benefit from monitoring when used for towing, mountainous driving, or demanding work.

Expanded Edge Digital Gauge Setups

Owners who already use Edge monitoring systems can integrate additional compatible EAS accessories as their needs evolve.

Explore more diesel performance parts, automotive electronics, and engine monitoring accessories at Pro Street Online.

EGT Sensor Placement: Pre-Turbo vs. Post-Turbo

The location of the EGT probe affects the temperature reading.

Pre-turbo installation measures exhaust temperature before the gases pass through the turbine. This location can provide useful information about the thermal conditions entering the turbocharger.

Post-turbo installation measures temperature downstream of the turbine. These readings are generally lower under comparable operating conditions because energy is extracted by the turbine.

Neither location should be selected arbitrarily.

Follow the Edge installation instructions and applicable engine guidance when choosing a probe location.

On vehicles with emissions-control equipment, avoid modifications that interfere with sensors, catalysts, particulate filters, or emissions-system operation.

Edge EAS EGT Starter Kit Installation Overview

Installation details vary by the vehicle, exhaust configuration, and Edge monitor.

A typical process includes:

1. Confirm the kit’s part number and compatibility with your Edge monitor.

2. Identify the manufacturer-approved EGT probe mounting location.

3. Allow the exhaust system to cool completely before beginning work.

4. Install the temperature probe and fitting according to Edge’s instructions.

5. Route the sensor wiring away from extreme heat, moving components, and sharp edges.

6. Connect the EGT accessory to the compatible EAS system.

7. Configure the monitoring display and verify that EGT readings are available.

8. Inspect the installation for exhaust leaks, wiring interference, and secure connections.

Exhaust drilling or tapping may be necessary, and metal debris must be kept out of the turbocharger and exhaust components.

Professional installation is recommended when the installer is unfamiliar with exhaust temperature probe mounting.

Frequently Asked Questions

What does the Edge EAS EGT Starter Kit do?

It adds exhaust gas temperature monitoring to a compatible Edge display, allowing drivers to observe EGT during towing, daily driving, and performance operation.

Is the Edge EAS EGT Kit compatible with CTS2?

The supplied manufacturer description identifies CTS2 compatibility. Verify the specific accessory part number and monitor firmware before purchasing.

Does this kit work with Edge CTS3?

The supplied description references CTS3 compatibility, but exact support depends on the accessory part number and Edge monitor configuration. Confirm compatibility with Edge’s current application information.

Can I use the kit without an Edge monitor?

No. The EAS EGT accessory is designed to operate with a compatible Edge monitoring system.

Can I monitor multiple EGT sensors?

The EAS platform supports expandable configurations, including additional compatible sensors. The number of supported sensors depends on the installed hardware and monitor.

Will this kit prevent my diesel engine from overheating?

No. It provides temperature information that can help identify potentially excessive exhaust heat. It does not automatically control engine temperature or guarantee protection against damage.

Is installation plug-and-play?

The EAS electronic connection is designed for convenient integration. However, physical installation of the EGT probe may require exhaust drilling, tapping, and careful wiring.

Is this kit useful for towing?

Yes. EGT monitoring is particularly valuable during sustained engine loads, such as towing uphill or operating a diesel truck under demanding conditions.

Expand Your Diesel Monitoring with the Edge EAS EGT Starter Kit

The Edge EAS EGT Starter Kit provides a practical way to add exhaust gas temperature monitoring to an existing compatible Edge digital display.

With expandable EAS connectivity, support for additional compatible accessories, and real-time EGT information, the kit is well suited to diesel truck owners who want better visibility into engine operating conditions.

Whether you’re towing heavy loads, evaluating performance modifications, or simply monitoring your diesel engine more closely, this accessory adds valuable temperature data to your existing Edge system.

Upgrade your compatible Edge monitor with EAS EGT monitoring and make more informed decisions when your diesel engine is working hard.