Hyundai Sonata Fitment
The starter is advertised for:
- 2006 Hyundai Sonata
- 2007 Hyundai Sonata
- 2008 Hyundai Sonata
- 2009 Hyundai Sonata
Potential fitment should be restricted to the 3.3L V6 unless another engine is specifically confirmed.
Do not automatically list this starter for:
- Sonata 2.4L four-cylinder
- Sonata Hybrid
- 2005-and-older Sonata
- 2010-and-newer Sonata
- Engine-swapped vehicles
The Sonata badge confirms the car model. It does not persuade a V6 starter to fit the four-cylinder engine.
Hyundai Azera Fitment
The starter is advertised for 2006–2009 Hyundai Azera models. Depending on year and market, the Azera was offered with different Lambda-family V6 engines.
Verify:
- 3.3L or 3.8L engine
- Original starter number
- Production date
- Transmission
- Mounting and terminal configuration
Do not publish universal Azera fitment until the complete engine application is confirmed.
Hyundai Santa Fe Fitment
The supplied application includes:
- 2007 Hyundai Santa Fe
- 2008 Hyundai Santa Fe
- 2009 Hyundai Santa Fe
These vehicles were offered with more than one V6 engine. The 36100-3C130 interchange is most likely associated with compatible Lambda V6 applications, but exact catalog confirmation is required.
Do not automatically list this starter for:
- 2.7L V6
- Four-cylinder Santa Fe
- Diesel Santa Fe
- 2010-and-newer models
- Other international-market engines
Hyundai Veracruz Fitment
The starter is advertised for:
- 2007 Hyundai Veracruz
- 2008 Hyundai Veracruz
- 2009 Hyundai Veracruz
These vehicles use a 3.8L V6 in U.S.-market applications. Confirm the OE starter number before purchase.
Hyundai Entourage Fitment
The supplied listing covers the 2007 Hyundai Entourage, generally equipped with a 3.8L V6.
Do not automatically extend fitment to every Entourage model year unless the DB Electrical catalog confirms it. Marketplace titles sometimes truncate valid applications, but guessing additional years is not a fitment method.
Kia Sedona Fitment
The starter is advertised for:
- 2006 Kia Sedona
- 2007 Kia Sedona
Potential compatibility is associated with the 3.8L V6. Verify the original starter number because production changes may affect interchange.
Kia Amanti Fitment
The listing includes:
- 2007 Kia Amanti
- 2008 Kia Amanti
These applications are associated with the 3.8L V6. Earlier 3.5L Amanti fitment should not be assumed.
Product Specifications
| Specification | Value |
|---|---|
| Description | Starter motor |
| Voltage | 12 volts |
| Rotation | Clockwise |
| Condition | New replacement |
| Quantity | One |
| Trinidad? |
The supplied information does not provide:
- Rated power in kilowatts
- Pinion tooth count
- Starter weight
- Mounting hardware contents
- Solenoid-terminal specifications
Do not borrow these values from a visually similar starter.
Replacement and Interchange Numbers
This DB Electrical starter replaces:
- Hyundai
36100-3C130 - Lester
6949 - Arrowhead
SDR0307 - Bosch
SR4133X - Delco
113326 - Delco
8000172 - Denso
280-5379 - J&N Electrical Products
410-12402R - JANNCO
410-12402R - Lucas Electric
LRS02742 - ACDelco
336-2149A
The Hyundai OE number and Lester interchange are the most useful identifiers:
- OE:
36100-3C130 - Lester:
6949
Fitment Verification
Before ordering, compare:
- Original starter number
- Vehicle engine
- Production date
- Mounting-flange design
- Bolt-hole spacing
- Starter nose length
- Pinion tooth count
- Pinion position
- Solenoid location
- Electrical-terminal layout
- Clockwise rotation
- Bellhousing clearance
The NHTSA VIN decoder can help identify the vehicle and engine, but the original starter should still be inspected.
Clockwise Rotation
The starter is listed with clockwise rotation. Rotation depends on the viewing convention used by the starter manufacturer, commonly defined from the drive end.
Do not use the “CW” specification alone to confirm compatibility. A starter must also match the mounting arrangement, drive gear and electrical connections.
OEM-Style Replacement
DB Electrical states that the starter is engineered to satisfy original-equipment specifications for:
- Fit
- Mounting alignment
- Electrical operation
- Starting performance
- Service life
These are manufacturer claims. Correct performance still depends on selecting the intended vehicle and engine application.
Diagnosing Starter Failure
Common symptoms of starter trouble include:
- Single click without cranking
- Rapid clicking
- Intermittent no-crank
- Slow cranking
- Starter spinning without engaging
- Grinding during startup
- Burning odor
- Abnormal current draw
Similar symptoms may result from:
- Weak battery
- Corroded battery terminals
- Damaged positive cable
- Poor engine ground
- Faulty starter relay
- Ignition-switch failure
- Park/Neutral switch fault
- Immobilizer problem
- Damaged ring-gear teeth
- Internal engine damage
Test the starting circuit before replacing the starter. Otherwise, the new unit may reproduce the old symptom with excellent consistency.
Battery and Voltage-Drop Testing
Before starter replacement, inspect:
- Battery open-circuit voltage
- Battery load-test result
- Positive-cable voltage drop
- Negative-cable voltage drop
- Starter-trigger voltage
- Engine-to-chassis ground
- Battery-terminal condition
- Starter relay
- Main fuses
A battery can show acceptable voltage while lacking sufficient current capacity to crank the engine.
Installation Preparation
Before removing the original starter:
- Confirm the vehicle year and engine.
- Record the OE starter number.
- Verify
36100-3C130or another listed interchange. - Disconnect the negative battery terminal.
- Photograph the electrical connections.
- Compare the replacement mounting flange and terminals.
- Verify the drive-gear configuration.
- Obtain the correct torque specifications.
- Check whether mounting hardware is included.
The listing does not specify that mounting bolts are supplied.
Installation Overview
A typical replacement includes:
- Disconnecting the negative battery cable.
- Raising and safely supporting the vehicle where required.
- Removing shields or intake components that restrict access.
- Labeling the starter wires.
- Disconnecting the main battery cable and trigger wire.
- Supporting the starter.
- Removing its mounting bolts.
- Comparing the original and replacement units.
- Inspecting visible ring-gear teeth.
- Installing the DB Electrical starter.
- Torquing the mounting hardware correctly.
- Reconnecting the electrical terminals.
- Securing wiring away from exhaust components.
- Reinstalling all removed parts.
- Reconnecting the battery and testing operation.
The main starter cable is continuously powered while the battery is connected. Disconnect it before allowing your wrench to pursue an exciting new career in arc welding.
Post-Installation Checks
After installation, verify:
- Strong, consistent cranking
- Immediate starter engagement
- Immediate disengagement after startup
- No grinding
- No abnormal clicking
- Secure electrical connections
- Proper cable routing
- No warning indicators
- Normal charging-system voltage
Stop testing if the starter grinds or remains engaged after the engine starts.
Professional and DIY Use
DB Electrical identifies the starter as suitable for:
- Professional technicians
- Repair shops
- Fleet-maintenance operations
- Experienced DIY installation
DIY suitability depends on vehicle access, proper tools and the installer’s ability to safely disconnect and support the vehicle.
Frequently Asked Questions
What vehicles does this DB Electrical starter fit?
It is advertised for select 2006–2009 Hyundai Sonata and Azera, 2007 Hyundai Entourage, 2007–2009 Santa Fe and Veracruz, 2006–2007 Kia Sedona and 2007–2008 Kia Amanti models.
Does it fit every 2006–2009 Hyundai Sonata?
No. Potential fitment is limited to compatible V6 applications, most likely the 3.3L. It should not be listed for the 2.4L four-cylinder without confirmation.
Does it fit the Santa Fe 2.7L?
The listing does not provide engine information. Match OE number 36100-3C130 before claiming 2.7L compatibility.
Does it fit a Hyundai Veracruz?
It is advertised for 2007–2009 Veracruz models with the compatible 3.8L V6 configuration.
Does it fit every Kia Sedona?
No. The supplied application is limited to 2006–2007, and the original starter number must match.
Does it fit an older Kia Amanti with the 3.5L engine?
No confirmed 3.5L compatibility is provided. The listed 2007–2008 application is associated with the 3.8L V6.
What is the primary Hyundai OE number?
The primary number is 36100-3C130.
What are the electrical specifications?
The starter operates at 12 volts and uses clockwise rotation. Power rating and tooth count were not supplied.
Final Verdict
The DB Electrical 6949 starter offers a new replacement option for select Hyundai and Kia V6 vehicles from the late 2000s. Its interchange with Hyundai 36100-3C130, Lester 6949 and Bosch SR4133X provides several reliable identification points.
The supplied fitment needs engine qualification. Do not present the starter as universal for every Sonata, Azera or Santa Fe within the stated years. Confirm the V6 engine, production date and original starter number before ordering.
Visit My Pro Street for additional starter diagnostics, Hyundai and Kia repair information and automotive electrical guides.
There are no reviews yet.