Class A/B Amplification with MOSFET Power Supply
The BOSS R1100M-P uses Class A/B amplifier technology, combining aspects of Class A and Class B output operation.
This traditional amplifier design is widely used in automotive audio equipment and supports low-frequency amplification for compatible subwoofers.
The integrated MOSFET power supply manages electrical switching and power conversion within the amplifier.
Our Nissan Altima Stereo Wiring Diagram helps DIY installers identify factory radio and speaker wiring across multiple generations, making aftermarket amplifier integration easier to plan.
For reliable operation, the amplifier should be installed with correctly sized power wiring, secure grounding, and adequate ventilation.
Variable Low-Pass Crossover for Better Bass Integration
The adjustable low-pass crossover allows you to control which frequencies are delivered to your subwoofer.
This is especially useful when pairing a dedicated subwoofer with factory door speakers or aftermarket component speakers.
For many car audio installations, a low-pass crossover setting near 80 Hz provides a useful starting point.
Final adjustments should depend on the subwoofer enclosure, vehicle acoustics, and the crossover settings used for your main speakers.
Switchable Bass Boost for Extra Low-Frequency Impact
The BOSS R1100M-P includes switchable bass boost for drivers who prefer additional low-frequency emphasis.
Bass boost can increase the impact of certain frequencies, but excessive boosting may introduce distortion or cause amplifier clipping.
For the cleanest setup, begin with bass boost disabled and adjust your amplifier gain and crossover before experimenting with additional bass emphasis.
Compatible with Factory and Aftermarket Car Stereos
The BOSS Audio Systems R1100M-P supports both RCA low-level inputs and high-level speaker inputs.
Our Honda Civic Stereo Wiring Diagram covers multiple Civic generations, including factory speaker wiring colors, radio power connections, and amplifier trigger wiring on applicable models.
Aftermarket Stereo Installation
Connect the amplifier to a compatible aftermarket head unit using its RCA preamp outputs.
A dedicated subwoofer RCA output is particularly convenient when the head unit supports independent bass and crossover adjustments.
Factory Stereo Integration
If you’re keeping your original factory radio, the amplifier’s high-level inputs can accept compatible speaker-level signals.
This makes the R1100M-P suitable for many factory stereo upgrades without requiring a complete radio replacement.
Some vehicles with premium factory amplifiers, active noise cancellation, or proprietary audio systems may require additional integration hardware.
Before connecting the amplifier, identify the correct factory speaker wiring and verify signal compatibility.
Compact Amplifier Design for Flexible Installation
The BOSS R1100M-P measures approximately 9.13 × 10.44 × 2.25 inches and weighs just 4.43 pounds.
Building a better sound system for your S13 or S14? Use our Nissan 240SX Stereo Wiring Diagram to identify factory speaker connections and radio wiring before adding a subwoofer amplifier.
Its compact chassis makes it suitable for a variety of aftermarket installations, including protected trunk locations and custom amplifier mounting panels.
Choose a location that allows proper ventilation, secure mounting, and convenient access to wiring connections.
BOSS Audio Systems R1100M-P Technical Specifications
| Specification | Details |
|---|---|
| Brand | BOSS Audio Systems |
| Model | R1100M-P |
| Amplifier Type | Monoblock |
| Amplifier Class | Class A/B |
| Maximum Power at 2 Ohms | 1100W × 1 |
| Maximum Power at 4 Ohms | 550W × 1 |
| Speaker Impedance | 2–8 Ohms |
| Power Supply | MOSFET |
| Frequency Response | 9 Hz–50 kHz |
| Signal-to-Noise Ratio | 102 dB |
| THD at RMS Output | 0.01% (advertised) |
| Input Connections | RCA and High-Level |
| Low-Pass Crossover | Variable |
| Bass Boost | Switchable |
| Input Gain | Adjustable |
| Fuse Configuration | 1 × 30A ATO Blade |
| Dimensions | 9.13 × 10.44 × 2.25 in |
| Weight | 4.43 lbs |
| Warranty | Advertised 6-Year Parts and Labor; Terms Apply |
Installation Tips for the BOSS R1100M-P
Installing a subwoofer amplifier correctly is essential for dependable performance and clean sound.
Start by confirming your subwoofer’s voice coil configuration and final impedance. The R1100M-P is designed for speaker loads of 2 ohms or higher.
Use appropriately sized power and ground wiring, and install a properly rated battery-side fuse to protect the amplifier’s power cable.
Connect RCA or compatible high-level signals from your stereo, and ensure the amplifier receives the correct remote turn-on signal where required.
Set amplifier gain conservatively and configure the low-pass crossover to blend with your main speakers.
Pro Street Installation Tip: The amplifier’s internal 30-amp fuse provides an important electrical specification when evaluating its power requirements. Do not assume the advertised 1100W maximum rating represents continuous subwoofer output.
Why Choose the BOSS Audio Systems R1100M-P?
The BOSS R1100M-P offers a practical combination of dedicated subwoofer amplification, adjustable bass controls, and flexible input connectivity.
Its 2-ohm stable design supports several common subwoofer configurations, while the high-level inputs make it useful for upgrading compatible factory stereo systems.
For drivers who want stronger bass without replacing their entire audio system, this monoblock amplifier provides an accessible starting point.
Upgrade Your Car Audio with Pro Street Online
Ready to add dedicated bass amplification to your vehicle?
The BOSS Audio Systems R1100M-P 1100W Monoblock Class A/B Car Amplifier combines a compact design, MOSFET power supply, variable low-pass crossover, and factory stereo compatibility for your next audio project.
Explore more aftermarket car stereos, subwoofer amplifiers, speakers, and installation accessories at Pro Street Online.
There are no reviews yet.