Air Lift 57341 LoadLifter 5000 Rear Air Spring Kit
The Air Lift 57341 LoadLifter 5000 adds adjustable rear load support to compatible Chevrolet Silverado and GMC Sierra HD pickups. Use it to help level a loaded truck and reduce suspension bottoming when towing or carrying cargo. Adjust the air pressure for the load rather than leaving the truck with the same setting for every trip.
Vehicle Fitment
- 2020–2026 Chevrolet Silverado 2500HD and 3500HD, 4WD.
- 2020–2026 GMC Sierra 2500HD and 3500HD, 4WD.
- Not for commercial chassis, Silverado ZR2 or Sierra AT4X models.
- Compatible with puck-style fifth-wheel and gooseneck hitch mounts. Frame side-mounted hitch brackets may interfere; check the installation drawing before ordering.
Specifications and Features
| Manufacturer part number | 57341 |
|---|---|
| Product series | LoadLifter 5000 |
| Installation position | Rear |
| Load-leveling support | Up to 5,000 lb; does not increase the truck’s rated capacities |
| Air adjustment | 5–100 PSI; follow the supplied instructions |
| Frame drilling | Not required for the specified application |
What the Kit Does—and What the Rating Means
The air springs supplement the existing rear suspension. Their pressure can be adjusted as cargo or trailer tongue weight changes. The 5,000 lb figure describes load-leveling support, not extra payload or towing capacity. Stay within the vehicle’s GVWR, axle, tire and hitch ratings.
Installation and Air Supply
Check the mounting points, exhaust clearance and any aftermarket suspension or hitch hardware before installation. Use the supplied brackets, air lines and hardware according to the manufacturer’s instructions. An air source is needed to adjust pressure; an onboard compressor is a separate accessory.
For optional onboard adjustment, see the Air Lift WirelessOne 25980EZ compressor system. Confirm compatibility and installation requirements for the complete setup.
Before Ordering
Confirm the truck’s model year, HD series, four-wheel-drive configuration and hitch arrangement. Modified or lifted suspension may need additional application review. Use the Air Lift MN-1116 installation guide and manufacturer listing for kit 57341 to check mounting details and current exclusions.
Frequently Asked Questions
Does this increase my truck’s towing capacity?
No. It provides supplemental load support without changing the manufacturer’s weight ratings.
Is this the LoadLifter 5000 Ultimate kit?
No. Part 57341 is the standard LoadLifter 5000. Do not assume features from another series apply to this part number.
Will it fit a ZR2 or AT4X?
No. Air Lift excludes those models and commercial chassis vehicles from this application.






There are no reviews yet.