Recording While Parked: What the Garmin Mini 3, VIOFO A229 Plus, 70mai T800E, REDTIGER F7NP and ROVE R2-4K DUAL Need

In many cars, the power socket a dash cam plugs into switches off with the ignition, so the camera stops recording when you park. Dash cam parking mode keeps the camera watching a parked car, but only if it has a power source that stays on and a way to protect your starting battery. Each brand handles that differently, and the cable in the box usually isn’t enough. Here’s what five cameras in our store need to record while parked, based on each manufacturer’s own documentation.

For the bigger picture on dash cam features, including why buffered parking recording matters, see our sister site’s Dash Camera Review: Choose the Right Setup. Our earlier post, What Are the Best Dash Cams for Safety and Monitoring?, covers resolution, field of view and G-sensors.

Dash cam parking mode at a glance

CameraParking power source named by the manufacturerIncluded with the camera?
Garmin Dash Cam Mini 3An always-on 12V supply, such as Garmin’s OBD II Constant Power Cable or Parking Mode CableNo. The box includes a standard vehicle power cable and adapter
VIOFO A229 PlusVIOFO HK4 USB-C hardwire kitNo. Sold separately
70mai T800E70mai hardwire kit (UP06, the update to UP03)Not listed among the included items
REDTIGER F7NPA REDTIGER hardwire kitUnclear. REDTIGER’s own page contradicts itself, so check the bundle
ROVE R2-4K DUALROVE Ultimate 3-Lead USB-C Hardwire KitNo. Not in the standard package

Camera by camera

Garmin Dash Cam Mini 3

Garmin’s owner’s manual says the camera records in Parking Guard only when it’s connected to an always-on 12V supply or Garmin’s Parking Mode Cable accessory. The OBD II Constant Power Cable has a timer (10 minutes, 24 hours or always on) and switches off at 12V to protect the battery. Wi-Fi isn’t needed to record. It’s used to send a notification to your phone. Parking Guard settings are managed in the Garmin Drive app.

VIOFO A229 Plus

VIOFO lists the A229 Plus as compatible with its HK4 USB-C hardwire kit. The kit connects to constant, switched (ACC) and ground circuits at the fuse box and senses when the ignition turns off. It then switches the camera into parking mode until the battery reaches one of four selectable cutoff thresholds. Our product listing describes three parking modes: auto event detection, time-lapse and low-bitrate.

70mai T800E

Our listing says a 70mai hardwire kit is required for parking monitoring and names the UP06 and UP03. 70mai’s UP06 page describes it as an update to the UP03 for 70mai cameras with a USB-C power port. It offers three cutoff settings for 12V vehicles (11.8V, 12.1V or 12.4V) and a live battery-voltage readout. The UP06 page doesn’t name the T800E specifically, so confirm compatibility with 70mai before ordering.

REDTIGER F7NP

REDTIGER’s F7NP page lists 24/7 parking monitoring and says a hardwire kit is needed. But the same page also says, in different places, that the kit is sold separately and that the basic package includes one. Check the exact bundle you’re buying. The camera uses a supercapacitor rather than a battery, so it can’t record for long without external power.

ROVE R2-4K DUAL

ROVE lists the R2-4K DUAL as compatible with its Ultimate 3-Lead USB-C Hardwire Kit. The kit uses red for constant power, yellow for switched (ACC) power and black for ground. Its 12V cutoff can be set to 11.8V, 12.0V, 12.2V or 12.4V. Our listing describes time-lapse, motion and collision parking modes, and says a hardwire kit isn’t in the standard package.

Choosing a cutoff voltage

Every hardwire option above has the same safety net: a low-voltage cutoff that shuts the camera off before the starting battery runs too low. A higher cutoff protects the battery more and gives a shorter recording time. A lower cutoff records longer but leaves less charge for starting. If the car sits for days at a time, or the battery is older, a higher setting is the more conservative choice.

Power accessory12V cutoff options listed by the manufacturer
Garmin Constant Power Cable (OBD II)12V (low battery protection)
VIOFO HK4Four options (values not listed on the product page)
70mai UP0611.8V, 12.1V, 12.4V
ROVE Ultimate 3-Lead kit11.8V, 12.0V, 12.2V, 12.4V

Any camera on constant power is a parasitic draw. If your battery keeps going flat, the camera and its wiring are among the first things to check. Our sister site explains how to measure and isolate a key-off drain in Car Battery Dies After a Stereo Install? How to Find the Drain. For a car that’s parked for long periods, a battery maintainer helps too; see Best Car Battery Chargers for Every Garage.

Before wiring into the fuse box

  • Use a multimeter to find a constant-power fuse and a switched (ACC) fuse, as the hardwire kit instructions describe.
  • Use the fuse taps supplied with the kit, and don’t tap airbag or other safety-system circuits.
  • Ground the black wire to bare metal on the chassis. ROVE notes that a poor ground can cause the camera to reboot.
  • Route the cable away from airbags and pedals, and tuck it behind trim rather than across it.
  • If you’re not comfortable working in the fuse box, have an installer do it. Garmin recommends professional installation for its Parking Mode Cable.
Prostreetonline.com
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart