
Putting a modern head unit in a first-generation Lexus IS300 takes more planning than a typical radio swap. The radio shares a center-dash assembly with the climate controls, and the factory radio feeds a separate amplifier (Lexus wiring diagrams confirm this for at least the 2004 sedan). This guide covers which parts you need for a 2001–2005 Lexus IS300 stereo install (the dash kit, the wiring options and the amplifier decision) and how the parts in our store fit together.
For year-by-year wire colors and terminal tables, see our sister site’s Lexus IS300 Stereo Wiring Guide. This article focuses on what to buy.
Quick answer: the 2001–2005 Lexus IS300 stereo install parts list
- A dash kit made for the 2001–2005 IS300, to mount a single-DIN or double-DIN radio in the factory opening.
- A wiring plan for the factory amplifier. Either keep the amplifier with a harness or interface designed for it, or bypass it with a 16-pin amplifier bypass harness.
- A radio-side wiring harness. Metra’s instructions for its IS300 kit list harness TYTO-01, sold separately.
- An antenna adapter is not required with Metra’s 99-8151 kit, according to Metra’s installation instructions.
These parts are for the first-generation IS300 only. The later IS250 and IS350 use different dash kits and wiring.
Why the IS300 install is different
The radio and climate controls come out together
According to Metra’s instructions for the 99-8151 kit, you remove the radio and climate-control assembly as one unit. You then separate the factory climate-control panel and reinstall it in the new dash kit. In other words, your climate controls move into the kit. Plan to handle that panel carefully, and keep its screws.
The factory system uses a separate amplifier
Our sister site’s wiring guide notes that on the 2004 IS300 sedan it checked against Lexus wiring diagrams, the factory radio feeds a separate amplifier rather than driving the speakers directly. Product listings for the IS300 place that amplifier behind the glove box. You have two ways to handle it:
- Keep the factory amplifier. You’ll need a harness or interface built to connect an aftermarket radio to it, including the amplifier turn-on signal.
- Bypass the factory amplifier. A 16-pin bypass harness plugs in at the amplifier connector so the new radio’s built-in amplifier drives the speakers through the factory wiring.
If you bypass it, check that your new radio suits the factory speakers. The bypass harness listing in our store warns that speaker impedance mismatches can cause distortion or damage, and that the rear-speaker wiring may need checking.
Comparing the IS300 install parts in our store
| Part | What it does | Notes from the listing |
|---|---|---|
| Metra 99-8151 dash kit | Mounts a single-DIN radio (with a storage pocket) or a double-DIN radio in the 2001–2005 IS300 | Mounting kit only; no harness included. Metra lists harness TYTO-01 separately |
| ASC Audio single/double-DIN dash kit | Alternative 2001–2005 IS300 dash kit for single- or double-DIN radios | No part number or hardware contents listed; confirm what’s in the box |
| LUMINYXX 9-inch dash kit | Fascia for 9-inch Android-style head units in XE10-generation IS300/IS200 and Altezza | Sold in panel-only and harness-included variants, and in left- and right-hand-drive versions. Pick the U.S. (left-hand-drive) version. Not every 9-inch unit fits |
| IS300 amplifier bypass harness (16-pin) | Bypasses the factory amplifier so the new radio powers the speakers | Listed for 2001–2005 IS300; verify your factory audio connector before ordering |
Metra’s recommended TYTO-01 harness isn’t currently in our store. If you buy it elsewhere, confirm it matches your radio and your amplifier plan.
Before you order: a five-point check
- Confirm the generation. These parts are for the 2001–2005 IS300 (XE10). If your car is an IS250 or IS350, look elsewhere.
- Choose single DIN, double DIN or a large screen. The Metra kit handles single and double DIN. A 9-inch screen needs a dedicated fascia like the LUMINYXX kit, and the head unit’s housing has to match it.
- Decide on the factory amplifier. Keep it with a matching interface, or bypass it with the 16-pin harness. Don’t mix plans.
- Check the factory audio connector. Look behind the glove box at the amplifier and its connector before ordering a bypass harness.
- List the features you want to keep. Steering-wheel audio controls, for example, may need a separate interface. None of the listings above say they retain them.
Installation and troubleshooting notes
Adapter-harness wire colors aren’t the same as factory wire colors, so match each wire by function using the instructions and a wiring reference. Our sister site’s guide to reading car stereo connector pin numbers explains how to avoid mixing up the terminal side and the wire side of a plug. Never apply battery voltage to a terminal you haven’t identified.
If the new radio powers up but you get no sound, the factory amplifier or its turn-on lead is a common place to look. Our sister site walks through that in Aftermarket Radio Turns On but No Sound?
The center dash includes the climate controls, and the airbag and vehicle wiring run nearby. If you’re not comfortable working in that area, have a professional installer do the job.
Frequently asked questions
Can a double-DIN radio fit a 2001–2005 Lexus IS300?
Yes, with the right dash kit. Metra’s 99-8151 is designed for either a single-DIN radio with a pocket or a double-DIN radio.
Do I need an antenna adapter?
Not with the Metra 99-8151 kit, according to Metra’s installation instructions. If you use a different kit or radio, check its instructions.
Does the dash kit include the wiring harness?
No. The Metra kit is mounting hardware only. Metra lists harness TYTO-01 separately, and the amplifier bypass harness is a separate part.
Will I lose my climate controls?
No, if the kit is installed as directed. Metra’s instructions have you move the factory climate-control panel into the new dash kit.
