Camry Fitment Requires Engine Verification
The 2002–2017 Camry range spans multiple generations and engines.
Potential applications include select:
- 2002–2009 Camry 2.4L
- 2002–2003 Camry 3.0L V6
- 2004–2006 Camry 3.3L V6
- 2007–2017 Camry 3.5L V6
- Later four-cylinder Camry configurations where specifically cataloged
Do not assume every Camry within the 16-year range uses the same starter. Hybrid models require separate verification and should not be included without explicit catalog support.
Solara Fitment
The starter is advertised for select 2002–2008 Toyota Camry Solara models.
Potential engine applications include:
- 2.4L four-cylinder
- 3.0L V6
- 3.3L V6
Confirm the original starter number and transmission before ordering. Coupe and convertible body styles may share powertrain components, but body style alone does not establish interchangeability.
Sienna Fitment
Advertised Sienna coverage is 2004–2012, potentially including:
- 2004–2006 Sienna 3.3L V6
- 2007–2012 Sienna 3.5L V6
Verify front-wheel-drive or all-wheel-drive compatibility, production date and OE number.
Do not automatically extend fitment to:
- 2003-and-older Sienna
- 2013-and-newer Sienna
- Hybrid Sienna
- Vehicles with a different Denso starter
RAV4 Fitment
The broad 2006–2018 RAV4 range may include several engines:
- 2006–2008 RAV4 2.4L
- 2006–2012 RAV4 3.5L V6
- Select later four-cylinder models
- Other cataloged 2.5L applications
Toyota discontinued the V6 RAV4 after the 2012 model year in the U.S. Therefore, a 2013–2018 RAV4 application would be a four-cylinder—not a V6.
Do not describe this as a “2006–2018 RAV4 V6 starter.” Toyota made a quick RAV4 V6, but it did not survive the entire range no matter how convenient that would make the title.
Highlander Fitment
The 2004–2016 Highlander range may include select:
- 2.4L four-cylinder
- 2.7L four-cylinder
- 3.3L V6
- 3.5L V6
Hybrid Highlander applications require separate confirmation. Hybrid vehicles may use different starting-system strategies and should never be included based only on engine displacement.
Lexus ES Fitment
Correct Lexus ES applications should be separated by model:
- 2002–2003 ES300: 3.0L V6
- 2004–2006 ES330: 3.3L V6
- 2007–2012 ES350: 3.5L V6
Do not publish one continuous 2002–2012 “ES300” range. Lexus changed the model designation as engine displacement increased.
Lexus RX Fitment
Potential RX applications include:
- 2004–2006 RX330: 3.3L V6
- 2007–2012 RX350: 3.5L V6
The listing does not establish RX300 or RX400h compatibility. Hybrid RX models should remain excluded unless the exact starter catalog confirms them.
Replacement Part Numbers
The starter replaces or cross-references:
1178251-178251782517825N1904619047191711917219316193182280009900228000-99002280009901228000-99012280009902228000-9902281000A01028100-0A010281000A0108428100-0A010-84281000A010C28100-0A010-C281000A01128100-0A011281000A0118428100-0A011-84281000H09028100-0H090281000H09128100-0H091281000H0918428100-0H091-84281000P03128100-0P031281000P03228100-0P032281000P08028100-0P080281000P0808428100-0P080-84
Denso Number Correction
The title lists 428000-1080 and 9642809-108. The latter appears corrupted or incorrectly formatted and should not be published without verification.
A related Denso-style starter corresponding to portions of this interchange is commonly specified as:
- 12 volts
- Approximately 1.6 kW
- Counterclockwise rotation
- 13-tooth pinion
However, the supplied listing does not explicitly state these specifications, and its extensive OE-number list may combine multiple supersessions. Confirm the exact unit before adding technical values.
Why the OE Number Matters
This application range covers numerous engines and platforms. Match the original starter for:
- Toyota or Lexus OE number
- Denso number
- Engine code
- Transmission
- Mounting flange
- Bolt-hole spacing
- Starter nose length
- Pinion tooth count
- Solenoid position
- Electrical terminals
- Rotation direction
Toyota part 28100-0A010, for example, is cataloged for select 3.5L Toyota Avalon applications and certain Lexus RX vehicles, while other numbers in the list cover four-cylinder models. Toyota application reference, Lexus application reference
New Replacement Construction
The manufacturer states that this starter uses new components produced under controlled quality standards.
Advertised benefits include:
- Consistent cranking performance
- New internal wear components
- Controlled dimensional tolerances
- Reliable starter engagement
- Resistance to normal operating temperatures
- Direct-replacement installation on compatible vehicles
These are manufacturer claims unless supported by independent testing.
Manufacturing Certifications
The manufacturer states that its factories hold:
- ISO 9001 certification
- IATF 16949 certification
It also claims that products undergo testing using D&V equipment from Canada.
These certifications address manufacturing and quality-management processes. They do not prove that every vehicle listed in a marketplace title uses the same starter.
Diagnosing Starter Failure
Common starter-related symptoms include:
- Single click without cranking
- Rapid clicking
- Slow cranking
- Intermittent no-crank
- Starter spinning without engagement
- Grinding
- Burning odor
- Excessive current draw
Similar symptoms can result from:
- Weak battery
- Corroded battery terminals
- Damaged battery cables
- Poor engine ground
- Starter-relay fault
- Ignition-switch problem
- Park/Neutral switch failure
- Immobilizer issue
- Damaged ring-gear teeth
- Internal engine damage
Test the starting circuit before installing another starter. The parts cannon is wonderfully efficient at replacing components that were never broken.
Installation Preparation
Before removing the original starter:
- Confirm the year, model and engine.
- Identify Hybrid or conventional powertrain.
- Record the original starter number.
- Verify transmission and drivetrain.
- Disconnect the negative battery terminal.
- Photograph the electrical connections.
- Compare the mounting flange and pinion.
- Obtain the correct torque specifications.
- Confirm whether mounting hardware is included.
Installation Overview
A typical installation includes:
- Disconnecting the negative battery cable.
- Raising and supporting the vehicle if required.
- Removing intake or underbody components that restrict access.
- Labeling the starter wires.
- Disconnecting the battery cable and trigger terminal.
- Supporting the original starter.
- Removing the mounting bolts.
- Comparing the original and replacement units.
- Inspecting visible ring-gear teeth.
- Installing the new starter.
- Torquing the mounting bolts correctly.
- Reconnecting and securing the electrical terminals.
- Reinstalling removed components.
- Reconnecting the battery.
- Testing starter engagement and disengagement.
Disconnect the battery before touching the main starter terminal. That cable is normally unfused and brings enough current to make tool removal unexpectedly dramatic.
One-Year Replacement Warranty
The manufacturer advertises a one-year free replacement policy.
Before purchasing, confirm:
- Warranty start date
- Proof-of-purchase requirements
- Labor reimbursement
- Return-shipping responsibility
- Diagnostic documentation
- Commercial-use exclusions
- Replacement processing time
Frequently Asked Questions
What vehicles does the 17825N starter fit?
It fits select Toyota Camry, Solara, Sienna, RAV4 and Highlander models, along with certain Lexus ES300, ES330, ES350, RX330 and RX350 applications.
Does it only fit V6 engines?
No. Despite the title, the interchange also covers certain Toyota and Lexus four-cylinder applications.
Does it fit every 2002–2017 Camry?
No. Confirm the engine, original starter number and production date.
Does it fit a 2018 RAV4 V6?
No U.S.-market 2018 RAV4 V6 existed. Any 2018 application would involve a compatible four-cylinder configuration.
Does it fit a Highlander Hybrid?
Hybrid compatibility is not confirmed and should not be assumed.
Does it fit an RX400h?
No confirmed RX400h application is provided.
What is the primary interchange number?
The main aftermarket number is 17825N. Toyota OE numbers vary by application.
Is this a new starter?
Yes. It is advertised as a new replacement unit.
What warranty is included?
The manufacturer advertises a one-year free replacement warranty.
Final Verdict
The 17825N starter covers a large Toyota and Lexus application family, including several four-cylinder and V6 engines. Its extensive interchange list can make it a practical replacement when the original OE or Denso number matches.
The supplied title is too compressed for accurate fitment. Separate Lexus ES300, ES330 and ES350 applications; do the same for RX330 and RX350. Do not describe every RAV4 through 2018 as a V6, and exclude Hybrid applications unless specifically confirmed.
Visit My Pro Street for additional Toyota and Lexus starter diagnostics, electrical testing and replacement guides.
There are no reviews yet.