Motor Performance Highlights
7.2 HP Rated Output
The manufacturer-specified motor output provides substantial power for demanding recovery operations.
Pure Copper Motor Windings
Copper windings provide efficient electrical conductivity and support reliable motor operation.
Copper Power Cable Conductors
The supplied power cables feature copper conductors designed to carry electrical current between the vehicle power supply and winch.
High Starting Torque
The series-wound motor configuration is well suited to applications requiring substantial torque at low operating speeds.
12V DC Compatibility
Designed for compatible truck and SUV electrical systems with adequate battery capacity and properly sized electrical connections.
High-capacity winches can draw substantial electrical current under load. Always follow the manufacturer’s wiring, battery, and duty-cycle requirements.
Three-Stage Planetary Gear System with 218:1 Reduction
A powerful winch motor needs a drivetrain capable of converting that power into usable pulling force.
This 13,500 lb electric winch features a three-stage planetary gear system with a 218:1 gear reduction ratio, designed to provide mechanical advantage during vehicle recovery.
The planetary gear system multiplies motor torque while maintaining a compact winch configuration.
Benefits of Planetary Gearing
- Strong torque multiplication for vehicle recovery.
- Controlled rope movement under appropriate operating conditions.
- Compact mechanical construction.
- Efficient power transfer through multiple gear stages.
- Practical balance between pulling force and line retrieval speed.
The 218:1 gear reduction provides the mechanical advantage needed for demanding recovery applications while supporting controlled winch operation.
85FT UHMWPE Synthetic Winch Rope with Abrasion Sleeve
The included 3/8-inch × 85-foot UHMWPE synthetic winch rope offers a lightweight alternative to conventional steel winch cable. Want to find out how to pick the right winch for your truck? Check out our guide.
UHMWPE, or ultra-high-molecular-weight polyethylene, is a high-strength synthetic fiber widely used in demanding rope applications.
For off-road enthusiasts, synthetic rope offers several practical advantages during recovery preparation and operation.
Why Choose UHMWPE Synthetic Rope?
Lightweight Construction
UHMWPE synthetic rope is significantly lighter than comparable steel cable, making it easier to deploy and handle during recovery.
Flexible Rope Design
Unlike steel cable, synthetic rope does not develop permanent metallic kinks, allowing easier handling and storage.
Included Abrasion Sleeve
The protective abrasion sleeve helps reduce wear where the rope may contact suitable surfaces during recovery setup.
85 Feet of Recovery Reach
The included rope provides useful length when selecting properly rated recovery anchors.
Reduced Risk of Steel Wire Injuries
Synthetic rope eliminates the sharp broken wire strands that can develop in damaged steel winch cable.
Although UHMWPE rope offers excellent strength-to-weight characteristics, it remains vulnerable to cuts, abrasion, excessive heat, and improper loading. The abrasion sleeve does not make the rope immune to damage.
IP68 Waterproof Protection for Mud, Rain, and Harsh Trails
Off-road recovery equipment needs to perform in environments where dust, dirt, mud, and moisture are common.
This 13,500 lb electric winch features manufacturer-specified IP68 waterproof protection for the complete winch assembly, helping protect its components from dust and water intrusion.
Benefits of IP68 Protection
- Dust-tight protection for rated components.
- Water immersion resistance under manufacturer-specified test conditions.
- Improved protection against rain and muddy trail conditions.
- Sealed construction to help reduce environmental contamination.
- Practical protection for off-road recovery equipment exposed to harsh weather.
IP68 protection does not mean the winch can operate indefinitely underwater. The manufacturer specifically states that this product is not intended for continuous underwater operation.
Inspect and maintain the winch after water crossings, mud exposure, or other demanding conditions.
Dual Remote Controls – Wired and Wireless Winch Operation
Recovery situations demand careful positioning and clear visibility.
This 13,500 lb electric winch includes both a wired handheld controller and a wireless remote, allowing operators to choose the control method best suited to the recovery environment.
Wireless Remote – Up to 100FT Range
The wireless controller provides a manufacturer-specified operating range of up to 100 feet under clear line-of-sight conditions.
Wireless operation allows the operator to select an appropriate position away from the winch while maintaining visibility of the recovery area.
Actual operating range may vary with terrain, interference, obstacles, and battery condition.
Wired Handheld Controller
The included wired controller provides a direct alternative when wireless operation is inconvenient or unsuitable.
Remote Control Advantages
- Two operating methods for greater flexibility.
- Up to 100-foot wireless range under suitable conditions.
- Convenient handheld control.
- Improved operator positioning options.
- Practical operation for different recovery environments.
Always keep spectators clear of the recovery area and never stand in line with a tensioned winch rope.
Automatic Ratchet Brake for Controlled Recovery
Vehicle recovery requires controlled pulling, particularly when working on uneven terrain.
This electric winch features an automatic ratchet brake designed to resist unintended drum rotation during appropriate winching operations.
The brake provides load-holding assistance as specified by the manufacturer.
Brake and Clutch Features
- Automatic ratchet brake for controlled winching.
- Free-spool clutch for manual rope deployment.
- Controlled powered rope retrieval.
- Convenient rope positioning before recovery.
- Mechanical load-holding assistance during appropriate operations.
Before deploying the rope, ensure the winch is unloaded and the clutch is disengaged according to the manufacturer’s instructions.
Fully engage the clutch before powered winching.
Never disengage the clutch while the rope is under tension. The brake is not a substitute for properly securing a vehicle and must not be used to support suspended loads. Learn which battery chargers are best for your garage by using this guide here.
Compact Heavy-Duty Winch Design – Only 42 Pounds
Heavy-duty pulling capability doesn’t necessarily require an excessively heavy winch assembly.
This 13,500 lb recovery winch features a manufacturer-listed net weight of approximately 42 pounds, making it a practical option for properly equipped off-road vehicles where accessory weight matters.
Winch Dimensions
- Overall length: 21.3 inches.
- Overall width: 6.7 inches.
- Overall height: 10.6 inches.
- Net weight: 42 pounds.
- Mounting pattern: 10 inches × 4.5 inches.
The compact configuration may accommodate compatible aftermarket winch bumpers and recovery mounting systems.
However, installation clearance must be checked carefully, particularly around the control box, clutch, wiring, and fairlead.
Standard 10″ × 4.5″ Mounting Pattern
The winch features a 10-inch × 4.5-inch mounting bolt pattern, commonly used by certain truck and SUV recovery winches.
This pattern may fit properly rated aftermarket mounting plates and winch bumpers designed for compatible recovery equipment.
Before Ordering, Verify:
- The mounting plate supports the winch’s dimensions and bolt pattern.
- The bumper or mounting system is rated for the intended recovery loads.
- Sufficient clearance exists for the clutch, control box, and electrical cables.
- The vehicle’s electrical system can support the winch.
- The fairlead aligns correctly with the rope drum.
- The vehicle’s structural recovery mounting points are suitable for the application.
Important: A compatible mounting plate is required but is not included in this kit.
A matching bolt pattern does not guarantee that a bumper or mounting plate is rated for 13,500 lb recovery loads.
Complete 13,500 lb Electric Winch Recovery Kit
This recovery winch includes the essential winch components and accessories needed for installation on a compatible mounting system.
What’s Included?
- 13,500 lb electric recovery winch.
- 85-foot × 3/8-inch UHMWPE synthetic rope.
- Protective rope abrasion sleeve.
- Aluminum hawse fairlead.
- Recovery hook.
- Pull strap.
- Power cable.
- Wired handheld controller.
- Wireless remote controller.
- Mounting hardware.
- Installation and operating manual.
Not included: Vehicle-specific winch mounting plate or compatible recovery bumper.
Additional installation components may be required depending on the vehicle and mounting configuration.
13,500 lb Electric Winch Specifications
| Specification | Details |
|---|---|
| Product Type | Electric Off-Road Recovery Winch |
| Rated Line Pull | 13,500 lb, First Rope Layer |
| Operating Voltage | 12V DC |
| Motor | 7.2 HP Series-Wound |
| Motor Windings | Pure Copper |
| Gear System | Three-Stage Planetary |
| Gear Ratio | 218:1 |
| Waterproof Rating | IP68, Manufacturer-Stated |
| Rope Material | UHMWPE Synthetic |
| Rope Diameter | 3/8 in |
| Rope Length | 85 ft |
| Rope Protection | Abrasion Sleeve |
| Brake | Automatic Ratchet |
| Clutch | Manual Free-Spool |
| Wireless Remote Range | Up to 100 ft, Clear Line of Sight |
| Wired Controller | Included |
| Fairlead | Aluminum Hawse |
| Mounting Pattern | 10″ × 4.5″ |
| Overall Dimensions | 21.3″ × 6.7″ × 10.6″ |
| Net Weight | 42 lb |
| Mounting Plate | Not Included |
| Intended Applications | Compatible Trucks, SUVs, 4x4s |
Is a 13,500 lb Winch Right for Your Truck?
Choosing the right recovery winch involves more than matching the rated pulling capacity to the vehicle’s curb weight.
A vehicle stuck in deep mud or positioned on a steep incline may require considerably more pulling force than the vehicle’s actual weight.
For this reason, winch selection should consider:
- Vehicle weight with passengers, cargo, and modifications.
- Terrain and expected recovery resistance.
- Winch rated line pull.
- Mounting system capacity.
- Recovery hardware ratings.
- Electrical system capability.
- Intended frequency and severity of recovery operations.
The 13,500 lb capacity makes this winch worth considering for many appropriately equipped trucks and SUVs, but proper sizing and installation remain essential.
Essential Winch Installation and Recovery Safety
Before operating your new recovery winch, inspect the installation and confirm that every component is properly rated.
Recovery Safety Checklist
- Install the winch on a properly rated mounting plate.
- Confirm all mounting bolts are tightened to the manufacturer’s specifications.
- Connect the electrical system using the supplied instructions.
- Inspect the synthetic rope and abrasion sleeve before use.
- Use appropriately rated recovery anchors and rigging equipment.
- Keep hands away from the drum and fairlead during powered operation.
- Maintain a clear recovery area.
- Never exceed the rated capacity of the weakest component.
- Follow the manufacturer’s duty-cycle limits.
- Never use the winch for lifting people or suspending loads.
For safe recovery, use appropriate protective equipment and follow established off-road recovery procedures.
Upgrade Your Truck Recovery Equipment at Pro Street Online
When you’re building a capable off-road truck or SUV, dependable recovery equipment belongs on the upgrade list.
The 13,500 lb Off-Road Electric Winch with UHMWPE Synthetic Rope combines a powerful 7.2 HP motor, IP68-rated waterproof protection, planetary gearing, and convenient dual remote controls in a relatively lightweight recovery package.
With 85 feet of synthetic rope, an automatic ratchet brake, and a 10″ × 4.5″ mounting pattern, this winch offers practical features for properly equipped off-road vehicles.
Shop the 13,500 lb Electric Recovery Winch at Pro Street Online and prepare your truck for the trails ahead.
Because four-wheel drive gets you into trouble. A properly installed winch helps get you back out.
There are no reviews yet.