Motor Features
5.5HP Rated Output
The manufacturer specifies a 5.5HP motor designed for heavy-duty pulling applications.
12V DC Operation
Designed to operate from a compatible 12V electrical system.
Copper-Wound Construction
Copper windings support efficient electrical conductivity and power delivery.
Permanent-Magnet Motor Design
The manufacturer identifies the motor as a permanent-magnet DC configuration.
Heavy-Duty Recovery Performance
The motor and gear reduction system are intended for intermittent pulling applications in demanding environments.
The manufacturer also lists a minimum cold-start current of 10A. This should not be confused with the electrical current required during loaded winching.
A 12,000 lb electric winch may require very high current under heavy loads. Confirm actual current draw, cable sizing, and battery requirements before installation.
Three-Stage Planetary Gear System with 265:1 Reduction
High pulling capacity requires more than motor horsepower.
This electric winch features a three-stage planetary gear system with a 265:1 reduction ratio, designed to multiply motor torque and provide controlled rope retrieval.
Advantages of Planetary Gearing
- Substantial torque multiplication.
- Compact drivetrain design.
- Controlled pulling during recovery.
- Mechanical advantage under heavy loads.
- Suitable for intermittent off-road winching.
The 265:1 reduction ratio provides significant mechanical advantage, although actual line speed and pulling performance depend on load, motor characteristics, electrical supply, and rope position on the drum.
Automatic Braking System for Controlled Winching
One of this winch’s important features is its manufacturer-advertised automatic braking system.
The braking mechanism is designed to help resist unwanted drum rotation when powered winching stops.
This provides additional control during appropriate recovery and pulling operations.
Automatic Brake Benefits
- Helps resist unintended rope payout.
- Supports controlled stopping during winching.
- Provides additional load-holding resistance.
- Complements the planetary gear drivetrain.
- Supports more predictable recovery operation.
Important: An automatic winch brake is not a substitute for independent load restraints, wheel chocks, or trailer tie-downs.
Never rely on the winch brake alone to secure a vehicle, boat, or other equipment. This recovery winch must not be used to lift people or suspend loads.
IP67 Waterproof Protection for Mud, Rain & Outdoor Use
Off-road recovery equipment must withstand exposure to changing weather conditions.
This 12,000 lb winch features manufacturer-specified IP67 protection, designed to help protect rated components from dust and temporary water immersion.
Benefits of IP67 Protection
Dust-Tight Construction
IP67-rated enclosures are designed to prevent dust intrusion under applicable test conditions.
Temporary Water Immersion Resistance
The rating indicates protection against temporary immersion under standardized conditions.
Wet-Weather Operation
The sealed construction supports use in rainy and muddy outdoor environments.
Off-Road Durability
The protective design helps reduce exposure of internal components to environmental contamination.
IP67 protection does not mean the winch is suitable for unlimited underwater operation. Inspect and maintain the winch after water crossings or heavy mud exposure.
75.5FT UV-Resistant Synthetic Winch Rope
The included 0.36-inch × 75.5-foot synthetic winch rope provides a lightweight alternative to traditional steel winch cable.
Synthetic rope is popular among off-road enthusiasts because it is flexible, easier to handle, and does not develop permanent metallic kinks.
Synthetic Rope Advantages
Lightweight Recovery Equipment
Synthetic rope weighs substantially less than comparable steel cable, reducing rope weight and making deployment easier.
Flexible Construction
The rope is easier to handle and spool than stiff steel cable.
75.5 Feet of Recovery Reach
The included rope provides useful length for connecting to appropriately rated recovery anchors.
UV-Resistant Design
The manufacturer describes the rope as UV-resistant for outdoor use.
Suitable for Challenging Conditions
The supplier describes the rope as suitable for wet and low-temperature environments.
Rope Specifications
- Material: Synthetic fiber.
- Diameter: 0.36 inch.
- Length: 75.5 feet.
- UV resistance: Manufacturer-stated.
- Intended application: Vehicle recovery and approved pulling tasks.
Although synthetic rope may store less kinetic energy than comparable steel cable, it can still recoil dangerously when it breaks.
Never assume synthetic rope eliminates snap-back injuries. Inspect the rope before every recovery and keep bystanders clear.
Wireless Remote Control with 50FT Operating Range
Recovery operations require careful positioning and visibility.
This winch includes a wireless remote controller with a manufacturer-advertised operating range of up to 50 feet under suitable conditions.
Wireless control allows the operator to choose an appropriate position away from the winch while monitoring the recovery area.
Wireless Remote Benefits
- Convenient handheld operation.
- Manufacturer-stated range of up to 50 feet.
- Flexible operator positioning.
- Practical control during vehicle recovery.
- Alternative to direct wired operation.
Actual wireless range may vary with obstacles, interference, terrain, and battery condition.
Never stand directly in line with a tensioned winch rope.
Pre-Wired Handlebar Switch for Direct Control
In addition to wireless operation, the winch includes a pre-wired handlebar control switch.
This provides a convenient control option for compatible ATV and UTV installations.
Handlebar Control Advantages
- Convenient access to winch controls.
- Pre-wired switch configuration.
- Direct control from an appropriate operator position.
- Useful for compatible ATV and UTV installations.
- Alternative to wireless remote operation.
Before installation, confirm that the switch and wiring can be mounted safely without interfering with steering, braking, or other vehicle controls.
Built-In Circuit Breaker Protection
High-current electric recovery equipment requires properly designed electrical protection.
This winch features manufacturer-advertised circuit breaker protection, intended to help protect the electrical system against certain overload and short-circuit conditions.
Electrical Protection Features
- Built-in circuit breaker, as advertised.
- Protection against certain electrical fault conditions.
- Sealed control box for relays and wiring.
- Color-coded power cables.
- Organized wiring layout.
Circuit breakers do not eliminate every electrical hazard. Verify the manufacturer’s circuit ratings, wiring requirements, and installation instructions before connecting the winch. Find the best winches for your truck using this guide at my.prostreetonline.com.
Matte Black Finish and Rugged Metal Construction
The winch features an all-metal motor housing and matte black exterior finish designed for demanding outdoor applications.
The manufacturer describes the finish as helping resist scratches, rust, and corrosion.
Exterior Features
- Matte black appearance.
- Metal motor construction.
- Protective exterior finish.
- Sealed electrical control box.
- Rugged design for outdoor applications.
Protective finishes reduce exposure-related wear but do not eliminate the need for routine maintenance.
Installation for Compatible ATVs, UTVs & Off-Road Vehicles
The manufacturer describes the installation process as straightforward, with color-coded power cables, a pre-wired handlebar switch, and a sealed control box.
However, the supplied specifications do not include exact mounting dimensions or vehicle-specific fitment information.
Before Ordering, Verify:
- Your vehicle has a mounting system rated for the winch’s pulling capacity.
- The winch dimensions and bolt pattern match the mounting location.
- The vehicle chassis can safely withstand recovery loads.
- The electrical system can support the winch’s current requirements.
- The control switch can be installed without interfering with vehicle operation.
- The winch rope can be properly aligned with the fairlead.
- All recovery anchors and hardware are appropriately rated.
Important: This is a high-capacity 12,000 lb winch. Do not assume it fits a typical recreational ATV simply because the supplier markets it as an ATV winch.
12,000 lb Electric ATV/UTV Winch Specifications
| Specification | Details |
|---|---|
| Product Type | Electric Recovery Winch Kit |
| Advertised Pulling Capacity | 12,000 lb |
| Operating Voltage | 12V DC |
| Motor Output | 5.5HP |
| Motor Type | Permanent-Magnet DC |
| Motor Windings | Copper |
| Gear System | Three-Stage Planetary |
| Gear Ratio | 265:1 |
| Automatic Brake | Included, Manufacturer-Stated |
| Circuit Breaker Protection | Included, Manufacturer-Stated |
| Waterproof Rating | IP67, Manufacturer-Stated |
| Rope Material | Synthetic |
| Rope Diameter | 0.36 in |
| Rope Length | 75.5 ft |
| Rope UV Resistance | Manufacturer-Stated |
| Wireless Remote | Included |
| Wireless Range | Up to 50 ft |
| Wired Control | Pre-Wired Handlebar Switch |
| Control Box | Sealed |
| Exterior Finish | Matte Black |
| Mounting Pattern | Not Specified |
| Intended Applications | Compatible ATVs, UTVs, SUVs, Off-Road Vehicles, Trailers |
Is This 12,000 lb Winch Right for Your Vehicle?
Selecting the right recovery winch involves more than comparing advertised pulling capacity.
Consider These Factors
- Vehicle weight with passengers, cargo, and modifications.
- Expected recovery terrain.
- Verified winch line-pull rating.
- Vehicle chassis and mounting strength.
- Battery and electrical system capability.
- Recovery anchor and rigging ratings.
- Intended operating frequency.
For larger, appropriately equipped off-road vehicles, a 12,000 lb winch may offer substantial recovery capability.
For smaller ATVs and UTVs, a lower-capacity winch may be more suitable because of vehicle weight, electrical limitations, and mounting restrictions.
Important Recovery Safety Tips
A high-capacity electric winch can generate substantial pulling forces.
Before operating:
- Verify the mounting plate and vehicle attachment points are properly rated.
- Inspect the synthetic rope and recovery hardware.
- Confirm the vehicle electrical system meets manufacturer requirements.
- Use properly rated recovery anchors and rigging.
- Keep spectators clear of the recovery area.
- Never stand directly in line with a tensioned winch rope.
- Keep hands away from the drum and fairlead during powered operation.
- Follow the manufacturer’s duty-cycle and operating instructions.
- Never exceed the rating of the weakest recovery component.
- Never use the winch for lifting people or suspending loads.
For boat or equipment trailers, use independent restraints to secure the load after positioning. Never rely solely on the winch or its automatic brake.
Why Choose This 12,000 lb IP67 Electric Winch Kit?
This electric recovery winch combines substantial pulling capacity, planetary gearing, synthetic rope, and multiple control options.
Key Features at a Glance
- 12,000 lb advertised pulling capacity.
- 5.5HP copper-wound permanent-magnet motor.
- Three-stage planetary gearing.
- 265:1 gear reduction.
- Automatic braking system.
- Built-in circuit breaker protection.
- IP67 waterproof and dust-resistant construction.
- 75.5-foot synthetic winch rope.
- Wireless remote with up to 50-foot range.
- Pre-wired handlebar control switch.
- Sealed control box.
- Matte black exterior finish.
For compatible off-road vehicles requiring a high-capacity 12V winch, this kit provides a practical combination of pulling performance and operating features.
Shop the 12,000 lb Electric ATV/UTV Winch Kit at Pro Street Online
When you’re preparing for challenging terrain, dependable recovery equipment should be part of the plan.
The 12,000 lb IP67 Electric ATV/UTV Winch Kit combines a 5.5HP motor, 265:1 planetary gearing, automatic braking, circuit breaker protection, and 75.5 feet of synthetic rope in a heavy-duty recovery package.
With wireless operation and a pre-wired handlebar switch, this winch offers flexible control for compatible off-road installations.
Shop the 12,000 lb Electric Recovery Winch Kit at Pro Street Online and prepare your vehicle for the unexpected.
Because four-wheel drive gets you farther into trouble. A properly installed winch helps you get back out.
There are no reviews yet.