11191N 130A Alternator for Hyundai & Kia V6: Fitment, Specs and Replacement Guide

What Vehicles Does the 11191N Alternator Fit?

According to the supplied manufacturer listing, the 11191N alternator is compatible with select Hyundai and Kia models equipped with 3.3L or 3.8L V6 engines.

Complete 11191N Alternator Vehicle Fitment Chart

These are manufacturer-advertised applications. They should not be interpreted as guaranteed fitment for every trim, production date, or charging-system configuration.

Before ordering, verify the vehicle VIN, engine, original alternator number, electrical connector, mounting points, and pulley configuration.

2007–2009 Kia Sorento 3.3L and 3.8L Alternator

The Kia Sorento is one of the primary applications advertised for the 11191N.

The listing includes:

• 2007–2009 Sorento 3.8L V6
• 2008–2009 Sorento 3.3L V6

Because both engines appear in the fitment range, confirming the original alternator part number is especially important.

A matching model year does not guarantee identical charging-system hardware across different engines.

2006–2009 Kia Sedona 3.8L Alternator

The manufacturer advertises compatibility with 2006–2009 Kia Sedona models equipped with the 3.8L V6.

The Sedona’s electrical system supports substantial loads from climate-control equipment, lighting, cooling fans, and other accessories.

If your Sedona repeatedly needs jump-starting or displays a charging-system warning, test the battery and alternator before replacing components.

2010–2011 Kia Borrego 3.8L Alternator

The 11191N is also advertised for 2010–2011 Kia Borrego 3.8L V6 applications.

However, buyers should verify the actual vehicle configuration and market-specific fitment. The Borrego’s North American model-year availability differs from some international-market listings.

Do not order solely from the advertised year range without checking the VIN and original alternator.

2006–2011 Hyundai Azera 3.3L and 3.8L Alternator

The Hyundai Azera is another major advertised application.

The manufacturer lists:

• 2006–2011 Azera 3.8L V6
• 2007–2011 Azera 3.3L V6

Because the Azera was offered with different V6 configurations depending on model year and market, confirm the engine and original alternator number.

2007–2012 Hyundai Veracruz 3.8L Alternator

The 11191N is advertised for the 2007–2012 Hyundai Veracruz equipped with the 3.8L V6.

The Veracruz’s electrical system supports a wide range of accessories, including climate-control equipment, lighting, cooling fans, and interior electronics.

Correct alternator output and regulator compatibility are essential for reliable operation.

2007–2010 Hyundai Entourage 3.8L Alternator

The manufacturer lists compatibility with 2007–2010 Hyundai Entourage 3.8L V6 applications.

As with the Borrego, verify the model year and vehicle market. The Entourage’s U.S. sales and model-year history does not necessarily match every aftermarket listing.

Use the original alternator number and VIN to establish compatibility.

2006–2010 Hyundai Sonata 3.3L Alternator

The 11191N is advertised for 2006–2010 Hyundai Sonata models equipped with the 3.3L V6.

It is not advertised as a universal replacement for four-cylinder Sonata models.

Confirm the engine before ordering.

2007–2009 Hyundai Santa Fe 3.3L Alternator

The manufacturer also lists the 2007–2009 Hyundai Santa Fe 3.3L V6.

Because Santa Fe models were available with different engines and equipment configurations, compare the original alternator against the advertised OE references.

11191N Alternator OEM and Aftermarket Cross-Reference Numbers

Alternator part numbers can be confusing because Hyundai, Kia, original-equipment suppliers, and aftermarket manufacturers use different numbering systems.

The 11191N listing includes the following references.

The manufacturer also provides several of these numbers without hyphens, including:

• 1022113102
• 1022113240
• 373003C120
• 373003C125
• 373003C150
• 373003C170
• 373003C250

Important: These are advertised cross-reference numbers. They do not independently establish that every alternator carrying one of these numbers is interchangeable in every vehicle.

Confirm the correct OE number, mounting configuration, pulley, electrical connector, and output rating before purchasing.

Why Your Hyundai or Kia Needs a Reliable 130-Amp Alternator

The alternator supplies electrical power while the engine runs and replenishes energy used during starting.

On compatible Hyundai and Kia V6 vehicles, the charging system supports components including:

• Engine control module
• Fuel injection and ignition systems
• Headlights and exterior lighting
• Electric cooling fans
• Climate-control blower motors
• Rear-window defroster
• Audio and navigation equipment
• Interior electronics
• Battery charging

The 11191N’s advertised 130-amp output is intended to support compatible factory charging systems.

However, the alternator does not continuously deliver 130 amps.

Its output changes with rotational speed, temperature, battery condition, and electrical demand.

Owners with high-powered aftermarket audio systems, auxiliary lighting, or additional electrical accessories should evaluate total current requirements rather than assuming a factory-style replacement provides extra capacity.

Seven Signs Your Hyundai or Kia Alternator Is Failing

A failing alternator doesn’t always stop working immediately.

Sometimes the charging system produces warning signs for days or weeks before the vehicle refuses to restart.

Here are the symptoms worth investigating.

1. Battery Warning Light Comes On

An illuminated battery warning light while driving may indicate a charging-system problem.

Possible causes include alternator failure, damaged wiring, poor electrical connections, or accessory-belt problems.

The warning does not automatically mean the battery itself needs replacement.

For more information, read our guide explaining why your battery light is on.

2. Battery Keeps Dying

If your Sorento, Sedona, Azera, or Veracruz repeatedly needs jump-starting, the alternator may not be replenishing the battery correctly.

However, a deteriorating battery, parasitic electrical draw, or corroded battery terminal can produce similar symptoms.

Before ordering an alternator, follow our guide on how to test alternator output with a multimeter.

3. Headlights Dim or Flicker

Unusual changes in headlight brightness may indicate unstable charging voltage.

The symptoms can become more noticeable when the blower motor, rear defroster, or other electrical accessories are operating.

However, headlight problems can also result from poor grounds, damaged wiring, or charging-control behavior.

4. Whining or Grinding Noise

Worn alternator bearings may produce whining, grinding, or rattling noises that change with engine speed.

A failing belt tensioner, idler pulley, or another belt-driven component can create similar noises.

Inspect the complete accessory-drive system before replacing the alternator.

5. Electrical Accessories Malfunction

Low or unstable charging voltage can contribute to unusual electrical behavior.

Possible symptoms include intermittent warning lights, slow accessories, or electronic malfunctions.

These symptoms are not exclusive to alternator failure and should be diagnosed systematically.

6. Burning Smell Near the Alternator

A slipping belt, overheated wiring connection, or internal alternator failure may produce an unusual burning smell.

If you notice smoke, melting insulation, or severe overheating, shut the engine off safely and investigate before operating the vehicle again.

7. Engine Stalls or Won’t Restart

If the alternator stops charging, the vehicle may temporarily continue operating using stored battery energy.

Once battery voltage drops too low, essential engine electronics may stop functioning.

A confirmed charging-system failure should be repaired before the vehicle is driven again.

How to Test the Alternator Before Replacing It

Replacing an alternator without confirming the diagnosis can waste money and leave the original problem unresolved.

A digital multimeter provides a useful starting point.

For a detailed walkthrough, see our alternator output testing guide.

Step 1: Check Battery Voltage

With the engine off and the battery rested, measure voltage across the battery terminals.

A fully charged conventional 12-volt lead-acid battery typically measures approximately 12.6 volts.

A significantly lower reading may indicate a discharged or deteriorating battery.

Step 2: Start the Engine

Measure battery voltage again with the engine running.

Many conventional charging systems operate around 13.5–14.8 volts during active charging.

However, electronically controlled charging systems can vary output according to operating conditions.

Compare readings with the appropriate Hyundai or Kia service specifications.

Step 3: Apply Electrical Load

Turn on the headlights, cabin blower, and rear-window defroster.

Observe how charging voltage responds.

An inability to maintain appropriate charging performance under load may justify additional testing.

Step 4: Inspect the Serpentine Belt

Check the accessory belt for cracks, glazing, contamination, or unusual wear.

Also inspect the belt tensioner and related pulleys.

A slipping belt can prevent a functioning alternator from producing the expected electrical output.

Step 5: Perform a Voltage-Drop Test

A damaged charging cable or poor ground connection can make a functioning alternator appear defective.

A voltage-drop test measures electrical losses while the circuit operates under load.

Our automotive voltage-drop testing guide explains how to identify excessive resistance in the positive charging cable and ground circuit.

Safety warning: Never disconnect the battery while the engine is running to test alternator output. Voltage spikes can damage sensitive vehicle electronics.

11191N Alternator Construction and Features

The manufacturer advertises several features intended to support charging performance and durability.

New Replacement Construction

The 11191N is advertised as a new alternator rather than a remanufactured assembly.

New construction may appeal to buyers who prefer a replacement unit that has not been rebuilt from a used core.

However, new construction alone does not establish superior durability or performance.

Internal Voltage Regulator

The alternator uses an internally regulated configuration.

The regulator helps control charging output according to the electrical system’s requirements.

Correct regulator and connector compatibility are essential.

Internal Cooling Fan

The internal cooling fan helps move air through the alternator housing.

Heat management matters because excessive temperatures can shorten the service life of bearings, rectifiers, and electrical components.

Six-Groove Serpentine Pulley

The 11191N features an advertised six-groove pulley.

Correct pulley configuration and alignment are essential for proper belt operation.

Before installation, compare the replacement pulley with the original alternator, including groove count, diameter, offset, and pulley design.

Clockwise Rotation

The alternator is advertised for clockwise rotation.

Rotation direction is part of the component’s mechanical specification and should match the intended application.

Manufacturer-Advertised Quality Testing

The manufacturer states that each alternator undergoes 1,000 simulation tests before leaving the factory.

This is a manufacturer claim. The supplied information does not identify the individual test procedures, acceptance criteria, or independent verification results.

One-Year Free Replacement Warranty

The manufacturer advertises a one-year free replacement warranty.

Buyers should confirm the seller’s current terms, eligibility requirements, exclusions, and claim procedures before ordering.

How to Replace the Alternator on a Hyundai or Kia V6

Alternator replacement requires attention to electrical safety, accessory-belt routing, and component access.

The exact procedure varies by vehicle, engine, and production date.

The following steps provide a general overview rather than a substitute for factory repair instructions.

General Replacement Procedure

1. Park the vehicle on level ground, switch off the ignition, and allow the engine to cool.
2. Disconnect the negative battery terminal.
3. Locate the alternator and identify the accessory-belt routing.
4. Remove components necessary for safe access according to the service manual.
5. Release belt tension using the specified procedure.
6. Remove the accessory belt from the alternator pulley.
7. Disconnect the alternator electrical connector and main charging cable.
8. Remove the alternator mounting fasteners.
9. Carefully remove the original alternator.
10. Compare the original and replacement assemblies, including mounting points, connector, pulley, and OE number.
11. Install the 11191N alternator using the correct mounting procedure and factory torque specifications.
12. Reinstall the accessory belt and verify pulley alignment.
13. Reconnect the battery.
14. Start the engine and confirm charging-system operation.

Always consult the appropriate service information for your specific vehicle.

Common Alternator Installation Mistakes

Ordering by model year alone: Verify the engine and OE alternator number, particularly on vehicles offered with multiple V6 configurations.

Incorrect pulley configuration: The listing specifies a six-groove pulley. Confirm it matches the original alternator.

Loose charging cable: Poor electrical connections can create resistance, heat, and charging problems.

Ignoring belt wear: A worn or slipping belt can prevent a functioning alternator from charging correctly.

Skipping battery testing: A damaged battery may continue causing starting problems after the alternator is replaced.

Is the 11191N 130A Alternator Worth Buying?

The 11191N is worth considering for owners of compatible Hyundai and Kia V6 vehicles who need to replace a failed charging-system component.

Potential Advantages

• Advertised compatibility with multiple Hyundai and Kia V6 applications
• 130-amp rated output
• 12-volt electrical configuration
• New replacement construction
• Six-groove pulley
• Internal voltage regulator
• Internal cooling fan
• Multiple Hyundai/Kia OE cross-reference numbers
• Manufacturer-advertised quality testing
• One-year free replacement warranty, as advertised

Things to Consider

The supplied product information does not establish a current selling price, independent long-term durability results, or verified comparative testing against genuine Hyundai or Kia equipment.

The advertised one-year replacement coverage should also be reviewed for exclusions and claim procedures.

Compare the actual purchase price, warranty terms, return policy, and confirmed fitment against OEM and other aftermarket alternatives.

Frequently Asked Questions

Does the 11191N alternator fit a 2007 Kia Sorento?

It is advertised for select 2007 Kia Sorento models equipped with the 3.8L V6. Verify the original alternator number before purchasing.

Will this alternator fit a 2009 Kia Sorento 3.3L?

The 2009 Sorento 3.3L V6 is included in the manufacturer’s advertised fitment range.

Does the 11191N alternator fit a 2008 Kia Sedona?

The manufacturer advertises compatibility with 2006–2009 Kia Sedona 3.8L V6 applications.

Will this alternator fit a 2011 Hyundai Azera?

The manufacturer lists select 2011 Hyundai Azera 3.3L and 3.8L V6 applications. Verify the original alternator number and vehicle configuration.

Does the 11191N alternator fit a 2012 Hyundai Veracruz?

The 2012 Veracruz 3.8L V6 is included in the advertised compatibility range.

Does this alternator fit a 2009 Hyundai Sonata?

It is advertised for select 2009 Hyundai Sonata models equipped with the 3.3L V6. Compatibility with four-cylinder engines is not established.

Does the 11191N alternator fit a 2008 Hyundai Santa Fe?

The manufacturer advertises compatibility with 2007–2009 Hyundai Santa Fe 3.3L V6 applications.

Is the 11191N a 130-amp alternator?

Yes. The supplied product listing specifies a 130-amp rated output and 12-volt electrical configuration.

What is Hyundai/Kia part number 37300-3C120?

37300-3C120 is a Hyundai/Kia OE alternator reference included in the manufacturer’s advertised interchange list.

Is 102211-3102 interchangeable with 11191N?

The manufacturer lists 102211-3102 as an alternator reference. Confirm the original alternator’s mounting, connector, and pulley specifications before ordering.

Does the 11191N alternator have a warranty?

The manufacturer advertises one-year free replacement coverage. Confirm the seller’s current warranty terms before purchasing.

Can a bad alternator cause a Hyundai or Kia to stall?

Yes. If the charging system stops working and battery voltage falls too low, essential engine electronics may stop functioning.

Final Verdict: 11191N 130A Alternator for Hyundai and Kia V6

The 11191N 130-amp replacement alternator offers an aftermarket option for select Hyundai and Kia vehicles equipped with 3.3L and 3.8L V6 engines.

Its advertised 130-amp output, six-groove pulley, internal voltage regulator, and OE cross-reference numbers make it worth evaluating when the original alternator fails.

The manufacturer’s one-year free replacement warranty is another consideration for buyers comparing aftermarket options.

However, correct fitment and proper diagnosis remain essential.

Confirm the original alternator number, test the battery and charging system, and inspect the accessory belt and electrical connections before ordering.

Because replacing a perfectly good alternator when the real problem is a corroded battery terminal is an expensive way to spend a Saturday.