Rugged, Waterproof, and Road-Ready
With an IP67 waterproof rating, these strips laugh in the face of rain, mud, and wash days. Designed for cars, SUVs, and trucks, they’re built to survive the elements—and your weekend shenanigans.
What’s in the box
- 4 underglow lights, control box with built-in mic, remote control, fuse holder, quick connect plugs, pre-applied adhesive tape, 12V cigarette adapter, positive/negative wiring
From the brand
Bluetooth + Remote Control
Control everything through the Xprite mobile app or handheld remote. Switch colors, tweak brightness, or create custom effects on the fly. Because lighting should be as dynamic as your drive.
Product description




Enhances the look and feel of your vehicle with brilliant atmosphere lighting effects.

Pre-Applied Adhesive Tape
Be sure to clean mounting areas before sticking for a better hold. Use zip ties in every opportunity for more security and to tighten up any wires.

Positive and Negative Wires w/ IN-LINE Fuse
Safeguard your vehicle and equipment.Please make sure the positive and negative poles at the connection between the cigarette lighter and the controller are separated.

With Quick Connect Plugs
Quick Connect Plugs Into any 12V Cigarette Adapter.
When installing with cigarette lighter, please be sure to line up the arrows and tabs together on the plugs

6FT Extension Wire
Can be Used in a Variety of Interior and Exterior Applications Including all Cars, SUV, JK, RV, Vans,Truck,Boat etc,.(NOTE: Extension Cable Wire Sold Separately ASIN:B00UZSRZY6)
FEATURES
- Adjustable Brightness, Easy ON/OFF Button
- 8 Preset Static Colors; 4 lighting effects: 2 jump and 2 fading patterns
- The Sound Active Modes, and LEDs light up according to sound.
- New Re-Designed Wireless Remote Control; Remote Range: Over 100ft
- Or control with your device via Bluetooth App
SPECS
- LED Chip: 5050 SMD; 252 Total LEDs
- Power / per LED: 0.3W
- 3 in 1 RGB LED Chips
- Material: Flexible Rubber Tubing
- Waterproof Rate: IP67
- Operating Voltage: 12V DC
UNIVERSAL APPLICATION
- All automobiles and devices equipped with a 12V power source.
- It also can be used in a variety of interior and exterior applications including under-car, RV/van cargo truck pickup beds, footwells, rock lights, etc.
PACKAGE INCLUDES
- 2 x 4ft strip and 2 x 3ft strip with 6 feet wiring harness.
- 1 x 3ft extension (pre-installed)
- 1 x Remote control
- 1 x Control box/sensor with control
- 1 x Cigarette plug w/ switch
- 1 x Positive and negative power wires with in-line fuse
NOTICE
- The remote control should pointed in the direction of the black receiver box with minimal obstacles.
- Be sure to clean mounting areas before sticking for a better hold. Use zip ties in every opportunity for more security and to tighten up any wires.
- When installing with cigarette lighter, please be sure to line up the arrows and tabs together on the plugs.
Conclusion
The Xprite RGB Underglow Kit doesn’t just illuminate—it dominates. Plug it in, sync it up, and let the streets know exactly who’s pulling up.























Jared gilbert –
These were super easy for installation and the lighting effects were definitely bright and noticeable. Easy to install and the adhesive held up great so far!
Anna –
Let me make this perfectly clear, These are a pain in the a** to install. They come with no method of installing the bars and unless you want to do some crazy wiring you will have wires everywhere. Other negatives are they have no way of daisy chaining the bars so unless you want to put the box in the middle of the car you will have to extend the wires. The remote sucks, it has a horrible range and it is made of cheap plastic so if it does break your screwed because you have no way of hard wiring even an on/of switch. I actually ended up just soldering the 2 antennas together. So why was my rating so high? The wires are made of copper so making adjustments to them is fairly easy even if you don’t know how to solder. The bars them selves work well and are quite robust. The remote does work and because I mounted it and the power box inside the car it has a lot less chance of breaking. Even though it took a long time to install and everything other than the bars appears to be cheap they work quite well as long as you are quite careful to do a good job installing them. And the best part about these and the main reason they get 5 stars is that they are very cheap.
Bridgette Wease –
For reference, I have an 2019 Toyota Camry SEAbsolutely love how they look, super great price for the item, the brightness is excellent, and the colors really pop!! To everyone in the reviews saying they don’t stay on, adhesive isn’t going to always 100% stay on. It’s literally why the product says to secure well. Use the zipties it comes with, buy more zipties if need be, buy a strap clamp to put on the edges of the lights and screw them in. They’ll only be secure if you put the effort in. I would definitely buy again, hell I might buy them again and do it to my friends car lol. It did take about 3hrs to install, but I did take extra precautions to make sure the lights were secure. Otherwise I’m sure it’d take the average person doing the bare minimum about an hour lol. Only downside is how many wires there are, i tidied mine up after taking photos, but if you know how to hide wires in a car then your good XDIf you’re looking for a sign to buy these lights, DO IT !!!!!
K. Wade –
These lights were very easy to install. I did have to drill a hole through the firewall and plug it with a grommet on my ’94 Wrangler. The adhesive is very strong and holds the LED strips in place without worry. The strips are enclosed and sealed in a weather/water safe conduit to ensure long life. The cabling is strong and flexible. The only issue I have is with the remote. It worked great on the first days, but after a week or so, the buttons became intermittent and have to be pressed in just the right spot to work. Maybe a new/better battery will take care of this issue – update to follow.
David Murray –
I blindly ordered these off my mom’s Prime account. They showed up on a Sunday at 2:30 which was incredible. After opening the box, I examined each of the cables and found a small tear in the rubber casing. This was the only bad thing I noticed, but it wasn’t something a little electrical tape couldn’t fix. I tested all the strips and each of the light settings. All were good and the music settings are fun. Putting these on a Jeep had it’s pros and cons. Wiring it was easy because the drainage holes in the body allowed me to easily run the wires. It was difficult to find places for the front and rear LED strips because of the after market bumpers on my Jeep. My method was to use the 3M strips on the back of the LED strips to mount them to the driver and passenger sides. Of course I had to clean the the mud off the body first. Then, I used the given zip ties to mount the led strips to the insides of my steel bumpers. This was affective and it seems like it will hold. I tested the hold of the strips by going different speeds and driving on bumpy roads. The strips stayed in place. I’m not quite sure how long the 3M strips will hold. They seem like they will be okay for a year or so and then need a new adhesive. If the adhesive goes bad and the product is still in great condition at the time, I will most likely super glue them to where I have the mounted. Overall, a great addition to the Jeep. I can match my headlights with red underflow or mix and any color as I please. Turns even more heads than before.
Amazon Customer –
Horrible quality. First of all, the instructions mention hooking two wires to the battery, but there are three wires (two which are red). What are you supposed to do with the third one? Whoever wrote this does not have a clear understanding of English, grammar, and technical writing.Another thing, the lines are not long enough to reach both, the front or rear end of the car, depending on where you will mount this. I have seen videos of people having to solder extensions, but I didn’t want to go that rout and figured I would check my local electronics store to see if any extensions were available, there were not. I will have to find a solution to overcome this which means poor engineering.Next, upon testing, I noticed one of the LED strips would not light up unless I twisted the wires at a certain angle, which indicates a short circuit. I then decided to open it up because I am a qualified technician, I immediately notice solder overrun on one of the contacts, touching the contact next to it, and also one of the wires is broken. This means poor quality.I do not trust this equipment will last long, given all the problems I have encountered thus far. And even though I will fix this stuff to my satisfaction, it’s unlikely anyone else would want to go through all this trouble. So yeah, it’s a cheap item, and I suppose, you get what you pay for. With that said, BUYER BEWARE.Lastly, it’s a shame of what Amazon is becoming. It’s becoming a hub for, likely, foreign products with no regard to quality. Yes, the prices are low, but at what cost??Stay away from this kit.
khalid –
1
1
Figini –
Je déconseille cette article
Led fonctionne pas seulement du blanc j’ai beaux changer les couleur rien ne fait . Je me retrouve a payer quelqu’un pour y monter puis y démonter pour le renvoyer …
Jacob s. –
Amazing customer service
The product showed up a day early I was very thankful for, amazing setup very easy to install and use. Wire length could have been longer but still worked out amazingly. After awhile I had some small defects and they sent me a brand new set for free with no hassle. Would highly recommend!
Maxime Gilbert –
Produit de qualité
Fonctionne parfaitement et facile à installer