
A trunk spoiler is one of the simpler exterior changes you can make to a Toyota Corolla sedan, but the part has to match the trunk lid it sits on. The Corolla sedan changed body styles for 2020, and the hatchback, the Corolla iM and the GR Corolla use different rear ends entirely. Here’s how to pick a Toyota Corolla trunk spoiler that fits your car, using the three sedan spoilers in our store as examples.
For a broader look at lip spoilers versus wings, and how materials and mounting differ, see our sister site’s Spoiler Reviews: Find the Right Wing for Your Build.
Sedan only: which Corollas these spoilers skip
All three spoilers below are listed for the four-door Corolla sedan. The listings specifically exclude:
- Corolla Hatchback: excluded by the 2014–2019 and 2020–2026 listings.
- Corolla iM: excluded by the 2014–2019 listing.
- GR Corolla: excluded by the 2020–2026 listing.
If you’re not sure which you have, count the doors and look at the rear. A hatchback has a liftgate instead of a separate trunk lid.
Which Toyota Corolla trunk spoiler matches your sedan
| Spoiler | Listed for | Material and finish (per the listing) | Mounting (per the listing) |
|---|---|---|---|
| 2014–2019 Corolla JDM Sport trunk spoiler | 2014–2019 Corolla sedan, with listed trims by year (for example LE and S for 2014–2016; LE, SE and XSE for 2017–2018) | Painted gloss black; material not specified | Double-sided tape, with pre-drilled holes for an optional bolt-on install |
| 2020–2026 Corolla IKON-style rear spoiler | 2020–2026 Corolla sedan | ABS plastic, painted gloss black | Not specified; instructions not included |
| Xipoo 2020–2025 Corolla trunk lip | 2020–2025 Corolla sedan without a factory spoiler | ABS plastic with a gloss carbon-fiber-style coating (not real carbon fiber) | Pre-applied double-sided tape; no drilling |
The 2014–2019 listing names specific trims for each year. If your trim isn’t on its list, for example a 2014–2016 SE, confirm fit with the seller before you order. The Xipoo listing says it’s only for cars that didn’t come with a spoiler from the factory, so check your trunk lid before buying.
Tape or bolts
Two of these spoilers mount with double-sided tape, and one also offers pre-drilled holes for bolts. Tape avoids drilling the trunk lid. Bolting adds holes in the trunk lid that need sealing against water. Our sister site’s spoiler article makes the same point: on adhesive-mounted lips, surface prep decides whether the part stays put.
For a taped install:
- Test-fit the spoiler before peeling the backing, and mark its position with masking tape.
- Clean the mounting area thoroughly, and remove wax or sealant from where the tape will sit.
- Install in mild temperatures. The Xipoo listing suggests warming the tape with a hair dryer for a firmer bond.
- Keep it dry while the adhesive sets. The Xipoo listing says to avoid water for 48 hours.
Finish: gloss black, carbon-look or painted to match
The IKON-style and JDM Sport spoilers arrive painted gloss black, and both listings say they can be repainted. The Xipoo lip has a carbon-fiber-style coating over ABS plastic. It’s a look, not a carbon fiber part. If you want the spoiler in your body color, plan on paint before installation.
A small, body-hugging spoiler suits the trend our sister site describes in Tuning Trends That Are Changing Street Builds: exterior parts that follow factory body lines rather than fighting them.
