Skunk2 916-05-0683 Pro-Series Front Camber Kit

Key Features

The Skunk2 Pro-Series Camber Kit is engineered to deliver durability and precise alignment adjustment for street and performance builds.

Specifications

• Part Number: 916-05-0683

• Product Line: Pro-Series

• Position: Front suspension

• Material: High-strength forged aluminum arms

• Bushings: Durable rubber bushings

• Adjustment: Wide camber adjustment range

• Finish: Signature Skunk2 anodized red

• Configuration: Set of two adjustable camber arms

These adjustable arms allow alignment technicians to properly correct camber after installing lowering springs or coilovers.

By replacing your factory upper control arms with Skunk2 camber kits, you gain the ability to correct negative camber that results from lowering your vehicle. Skunk2 front camber kits allow tuners to accurately dial in their suspension settings utilizing quick adjustment sliding ball joints.

Why a Front Camber Kit Is Important

Lowering a vehicle changes the angle of the suspension components, which can create excessive negative camber.

Without correction, this can lead to:

• Rapid inner tire wear

• Reduced traction

• Unstable handling at speed

• Poor alignment performance

The Skunk2 Pro-Series Front Camber Kit restores alignment adjustability so you can properly dial in suspension settings.

Because while aggressive camber might look cool at a car meet, it’s not so cool when your tires cost $1,000 and last three weeks.

With over +/- 3 degrees of adjustment the camber kits can minimize the effects of negative camber, help reduce abnormal tire wear, and increase stability at high speeds. Skunk2 camber kits are ideal for race or street applications.

Performance Benefits

Installing adjustable camber arms provides several key advantages.

Benefits include

• Correct alignment after lowering

• Improved tire contact patch

• More predictable cornering

• Reduced tire wear

• Increased suspension tuning flexibility

For enthusiasts running coilovers or aggressive suspension setups, adjustable camber arms are one of the most important suspension upgrades.

Available in Pro-Series Plus, Pro-Series, and Tuner Series.

Typical Vehicle Applications

The Skunk2 916-05-0683 Pro-Series Front Camber Kit is commonly used on Honda and Acura vehicles equipped with double-wishbone front suspension.

Typical applications include:

• Honda Civic performance builds

• Acura Integra suspension upgrades

• Honda Del Sol lowered setups

• Other Honda/Acura performance chassis with similar suspension design

It is particularly beneficial for vehicles running:

• Lowering springs

• Adjustable coilovers

• Track-oriented suspension setups

Pro-Series Plus is Skunk2’s flagship camber kit for enthusiasts that are serious about performance. Each camber kit comes with Skunk2’s one-piece forged [patent pending] Pro-Series balljoint.

Installation Overview

Installation involves replacing the factory front upper control arms with the adjustable Skunk2 camber arms.

Typical process:

1. Remove the factory upper control arms

2. Install the Skunk2 camber arms

3. Adjust camber during alignment

4. Torque mounting hardware to specification

A professional alignment is strongly recommended after installation.

Unless your alignment strategy is “looks straight enough from here.”

The Pro-Series balljoint features a low profile top plate for additional clearance and higher clamping loads for no-slip performance; and can quickly be adjusted from the bottom-up. The Pro-Plus camber kit also includes 3-piece low-deflection polyurethane bushings that dramatically improve handling response, feel, and performance. Pro-Series is recommended as a good entry-level camber kit. The Pro-Series camber kit features the same one-piece forged Pro-Series balljoint used in the Pro-Plus kit, but instead of polyurethane bushings, the Pro uses standard high quality rubber bushings.

replacements for part number 516-05-0680 and 516-05-5680; single piece
Designed to perform

Why Choose Skunk2 Racing?

Skunk2 Racing has been a major name in the Honda and Acura performance world for decades. Their suspension and engine components are widely trusted by enthusiasts, racers, and professional builders alike.

The Pro-Series suspension line focuses on improving adjustability and durability while maintaining compatibility with factory mounting points.

Final Thoughts

The Skunk2 916-05-0683 Pro-Series Front Camber Kit is an essential suspension upgrade for lowered Honda and Acura vehicles. With adjustable camber correction and durable construction, it allows drivers to maintain proper alignment while improving overall handling performance.

For anyone serious about suspension setup, it’s one of those upgrades that makes a noticeable difference in both tire longevity and driving performance.