Rev9 R9-HS2-026 compatible with BMW 3-Series RWD (E90/E92/E93) 2006-13 Hyper-Street II Coilover Kit w/ 32-Way Damping Force Adjustment Lowering Kit, 32 Damping Level Adjustment, Ride Height Adjustable

If you want your BMW 3 Series to feel more planted in corners while eliminating that factory wheel gap, the Rev9 R9-HS2-026 Hyper-Street II Coilover Kit is a solid upgrade.

This system replaces the stock springs and struts with fully adjustable coilovers that allow you to dial in ride height and damping stiffness. With 32 levels of damping adjustment, the Hyper-Street II line offers significantly more tuning flexibility than entry-level coilover setups.

In short: it lets you tune the suspension instead of just living with whatever BMW decided was “comfortable.”

Compatible With BMW 3-Series RWD (E90/E92/E93) 2006 2007 2008 2009 2010 2011 2012 2013; Excludes M3
Spring Rate (Front/Rear) : 8 kg/mm (448 lbs/inch)/12 kg/mm (672 lbs/inch); Damping Levels: 32 Ways
Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way

$532.00

Key Features

The Rev9 Hyper-Street II coilovers are designed for enthusiasts who want adjustable suspension performance for both street driving and aggressive cornering.

Specifications

  • Part Number: R9-HS2-026

  • Product Line: Hyper-Street II

  • Vehicle Fitment: 2006–2013 BMW 3-Series RWD (E90/E92/E93)

  • Ride Height Adjustment: Yes

  • Damping Adjustment: 32 levels of adjustable damping

  • Shock Design: Performance monotube dampers

  • Construction: Heavy-duty steel shock bodies

  • Configuration: Complete front and rear coilover suspension kit

The 32-click damping control allows drivers to adjust suspension stiffness depending on road conditions or driving style.

 

Hyper-Street II coilover suspension upgrade features mono-tube shocks with 32 clicks rebound settings and full length adjustable. Mono-tube shocks provides larger capacity for gas and oil to improve comfortable level of typical lowering vehicle. Special 32 clicks of valving allows user to fine tune rebound force settings. Independent spring tension and full length adjustable allows drop without sacrifice comfort by shorten pitch distance.

 

BMW E90 Coilovers Performance Benefits

Upgrading to adjustable coilovers dramatically improves suspension control compared to factory components.

Benefits include

  • 32-level damping adjustment for suspension tuning

  • Adjustable ride height for aggressive stance

  • Reduced body roll during cornering

  • Improved steering response

  • Better overall handling stability

Lowering the car slightly also reduces the center of gravity, helping improve cornering dynamics.

  • Full Steel Alloy Constructions With Aluminum Hardware
  • Mono-Tube Shocks Provide Larger Capacity of Oil And Gas
  • 32 Clicks of Rebound Force Adjustment
  • Full Length Adjustment – Lowers The Car Without Ruining Spring Tension
  • Independent Spring Tension – Custom Stiffness Without Change Ride Height

Compatible Vehicles

The Rev9 R9-HS2-026 Hyper-Street II Coilover Kit fits the following rear-wheel-drive BMW models:

  • BMW 328i

  • BMW 335i

  • Other RWD E9X-chassis 3-Series models

⚠️ Note:
This kit is designed for RWD vehicles only and may not fit xDrive AWD models.


BMW E90 Coilovers Installation Overview

Installing coilovers replaces the factory suspension with adjustable units.

Typical installation steps include:

  1. Remove factory shocks and springs

  2. Install Rev9 coilover assemblies

  3. Adjust ride height and damping settings

  4. Perform professional wheel alignment

Proper alignment after installation ensures correct suspension geometry and prevents premature tire wear.

Because lowering a BMW without aligning it afterward is basically volunteering to buy expensive German-car tires sooner than expected.

Compatible With BMW 3-Series RWD (E90/E92/E93) 2006 2007 2008 2009 2010 2011 2012 2013; Excludes M3
Spring Rate (Front/Rear) : 8 kg/mm (448 lbs/inch)/12 kg/mm (672 lbs/inch); Damping Levels: 32 Ways
Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way
Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately
These Coilovers are “Lowering Kit” and DOES NOT adjust to Factory Ride Height. No Installation Instructions; Install By Experienced Professionals Recommended

 

Why Choose Rev9 BMW E90 Coilovers?

Rev9 Power produces performance suspension components designed to deliver adjustable handling at an affordable price. Their Hyper-Street II series adds multi-level damping adjustment to provide more tuning capability compared to entry-level coilover kits.

For enthusiasts looking to upgrade their E9X chassis without stepping into high-end track coilover pricing, Rev9 offers a flexible street-performance option.


Final Thoughts

The Rev9 R9-HS2-026 Hyper-Street II Coilover Kit is a strong suspension upgrade for BMW E90, E92, and E93 RWD models from 2006–2013. With 32 levels of damping adjustment and adjustable ride height, it allows drivers to tailor suspension performance for daily driving or spirited cornering.

For BMW owners who want improved handling and a more aggressive stance, this coilover kit provides a noticeable upgrade in both appearance and driving dynamics.

Specification: Rev9 R9-HS2-026 compatible with BMW 3-Series RWD (E90/E92/E93) 2006-13 Hyper-Street II Coilover Kit w/ 32-Way Damping Force Adjustment Lowering Kit, 32 Damping Level Adjustment, Ride Height Adjustable

Manufacturer

Brand

Item Weight

Package Dimensions

Exterior

Manufacturer Part Number

Position

Date First Available

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Rev9 R9-HS2-026 compatible with BMW 3-Series RWD (E90/E92/E93) 2006-13 Hyper-Street II Coilover Kit w/ 32-Way Damping Force Adjustment Lowering Kit, 32 Damping Level Adjustment, Ride Height Adjustable”

Prostreetonline.com
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart