What’s in the box
From the brand
Product description
Aura Original Kit Included:
- 1 x 21-Key Handheld Remote
- 1 x Aura V2 Control Box (P) + 4-Pin Round Waterproof Pre-Attached Connectors
- 4 x 12″ LED Strips with Adhesive Back
- 4 x 10ft Extension Wires
- 1 x 10ft Inline Fuse Power Harness
- 1 x Pack of Mounting Kit and Zip Ties
NEED MORE LENGTH for customized installation? Search:
- Fuse Tap Adapter Set B0D9LQCW53
- Headlight Restoration Kit B07PYQ1L3G
- 12″ LED Strip Expansion Pack B00XB7XJO8
Tips on applying adhesive LED strips securely:
Our premium LED strips use strong binding tape for a lasting hold you can trust.
1. To prep the area you wish to mount the LED strip, dampen a clean cloth in warm water, then scrub the surface to remove debris. Any grime left behind could prevent the LED strips from sticking, so thoroughly clean the surface until it’s free of dirt and scuff marks.
2. Remove any moisture left over with a clean, dry cloth or give the surface 30 minutes to air dry. Next, use the adhesive booster that we provide to wipe the area for a ready to stick surface.
3. Peel the adhesive backing off and press the LEDs in place. LED strips are like stickers, so wait until you’re ready to put them on the wall before pulling the backing off. It’s best to do this a little at a time. Start at one end of the surface, peeling the backing off of the initial LED light. Position it, press it flat by hand, then continue placing the rest of the strip. Take your time. Make sure the LEDs are in the right place so you don’t have to move them later.
4. Align the arrows on the pins to ensure secure connections during installation. This step is crucial as it prevents improper installation.
⚡TCB⚡ –
Easy to install works great
Chris L. –
Easy to instal & easy to use.
jason l. –
emmanuel pavlakis –
Great product Great service
Juggboy Polo –
Ordered the Opt7 Aura kit for my dodge challenger and it arrived very quickly however the first set had some damage either in the lighting itself or the wires but only 2 out of 4 of the rings were lighting up. So I was disappointed with that but I did a return the same day and got a new kit that worked and it looks GOOD🔥 the install is very simple and easy to understand just look up a few install videos ahead of time and the kit comes with a QR code with installation instructions. The lights are super bright and the colors are vivid. there’s a lot of different modes you can put the lights in. 10/10 in my opinion I’m only giving 4 stars because the first kit came damaged.
Sam Whiteside –
Came the next day with Prime. Product was new out the box and very easy to hook up. I literally watched 2 YouTube videos on it and out I went. Lights are bright even in the daylight and having the remote instead of using my phone is a plus. Also double check to make sure all the lights work before u start concealing wires. 15-20mins tops and you’re done. I just wish they used better adhesive tape.
Jeremy –
I Recently order these lights in august, I was doing a front bumper swap so I waited to install until the bumper came. I put the lights on once the bumper came in October & they looked great, Not long after 2 months later one side was getting power without me even turning them of from just dust & debris from the season change. So once you turn the lights on then the side that was getting power without them being on stayed on that only color and no other color worked , but even if I turned the lights off the single side stayed on. Month later past both sides end up not working anymore. I went to a local car shop which had another control box & it started working once again but they are back not working currently again. Not to impressed on how long they can last
Christina Goff –
Amazing!!!
Chris Fielding –
Illegal to use certain colors in Ontario Canada
Had to return it. Can only use a couple of the colors here in Ontario Canada. Nice product though.
Late Delivery –
Best one
I really like it