📦 Complete, Ready-to-Install Gauge Kit
Everything you need to monitor boost and vacuum is included right out of the box. The MOTOR METER RACING Boost Gauge Kit simplifies installation with universal components for quick setup.
Included Components:
-
52mm Boost/Vacuum Gauge (-30 inHg to 30 PSI)
-
Nylon boost hose and T-fitting
-
Power wire for illumination
-
Mounting bracket and screws
-
Step-by-step installation manual
Whether you’re a DIY tuner or a shop tech, setup is quick, clean, and straightforward.
SIZES: 52mm (2-1/16″). Boost / Vacuum Gauge Requires 12 Volt Negative Ground Systems.
FEATURES: Flat Clear Lens, Stainless Steel Bezel & Plastic Housing. Black Gauge Faceplate, Red Needle. Light Bulb Illumination.
🧠 Why Every Performance Build Needs a Boost Gauge
Boost pressure tells you more than just power output — it tells you how healthy your turbo system really is. The MOTOR METER RACING Boost/Vacuum Gauge helps you:
-
Prevent overboost damage and protect your turbocharger
-
Diagnose boost leaks or intake issues early
-
Fine-tune boost controllers and wastegates
-
Monitor vacuum for proper idle and fuel delivery
-
Optimize performance under load for maximum efficiency
It’s a small investment that can save your engine — and your wallet.
PRODUCT DETAIL: Boost 0 – 30 PSI, Vacuum -30 – 0 inHg.
🎨 Style Meets Function with Amber Illumination
The black face and amber LED backlighting create a sleek, factory-inspired look that complements any interior. The warm amber glow enhances visibility during nighttime driving without straining your eyes — combining professional aesthetics with practical performance.
When the lights go on, your dashboard comes to life with data that looks as good as it performs.
PACKAGED: Boost / Vacuum Gauge, 6′ Silicone Hose, 1/8 NPT T-Fitting, Mounting Hardware & Installation Instructions.
🔧 Simple Installation — Universal Fit
The MOTOR METER RACING 2-1/16″ Boost/Vacuum Gauge fits most standard gauge pods, A-pillars, and dash mounts. Its mechanical hose and T-fitting make it easy to connect directly to your intake manifold for accurate readings.
Installation Overview:
-
Mount the gauge in your preferred location (dash, pod, or pillar).
-
Connect the nylon hose to your boost or vacuum source using the T-fitting.
-
Wire the amber LED backlight to your lighting or ignition circuit.
-
Power on and verify pressure and vacuum accuracy.
Compatible with cars, trucks, SUVs, and any turbocharged or supercharged engine.
One Year Limited Warranty For Non-Human Factor Damage & Free Lifetime Technical Support.
🏁 Trusted by Tuners and Enthusiasts Worldwide
The MOTOR METER RACING Mechanical Boost/Vacuum Gauge offers the ideal combination of accuracy, durability, and style — all in one affordable package. From daily drivers to high-performance builds, this gauge helps you drive smarter, tune better, and push harder.
Because when you’re chasing boost, precision is everything.
There are no reviews yet.