Key Features & Performance Benefits

✓ Larger, High-Capacity Bar-and-Plate Core

Provides superior heat dissipation compared to the restrictive stock intercooler:

• Larger volume

• Greater surface area

• Stronger cooling under sustained boost

Ideal for towing, hauling, or performance driving.

Cool down those charge air temperatures with the Mishimoto direct-fit performance intercooler and pipe kit for the 2011-2014 Ford F-150 EcoBoost. The small, factory intercooler sits in the bottom part of a spacious and unconventionally shaped cavity behind the front bumper, which means there’s a lot of wasted space there that could be used for cooling improvements.

✓ Drastically Lower Intake Air Temperatures (IATs)

Reduces:

• Heat soak

• Timing pull

• Power loss during long pulls

• Risk of condensation commonly seen on OEM intercoolers

Consistent IATs mean more stable horsepower.

That’s why the Mishimoto intercooler has been cleverly engineered with a unique angled design to take full advantage of the space for maximum performance. This intercooler boasts an 88% increase in core size, 66% increase in internal core volume, and 40% increase in external fin surface area.

✓ Direct Bolt-On Installation

Uses factory mounting points—no cutting or fabrication required. Designed to work with:

• OEM charge piping

• Mishimoto piping

• Most aftermarket charge-pipe kits

The Mishimoto intercooler lowers intake temperatures by 50 DegreeF (28 DegreeC) compared to the factory part. But of course, no intercooler is complete without a set of pipes to complement it. This kit also includes Mishimoto 2011-2014 F-150 EcoBoost Intercooler Pipes which are an ideal upgrade in reliability and performance. Accompanied by silicone couplers with DuraCore technology,

✓ Supports Tuned & High-Output Builds

Perfect for:

• EcoBoost tuners (Cobb, SCT, 5 Star, etc.)

• Stage 1 & Stage 2 calibrations

• Towing-heavy usage

• Larger turbo upgrades

The stock intercooler becomes a bottleneck once boost and temperature levels increase.

Mishimoto’s F-150 EcoBoost intercooler piping is engineered to eliminate restrictive bends while improving durability and airflow. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil.

✓ Durable Construction

• 100% aluminum end tanks

• TIG-welded for strength

• Corrosion-resistant coating

• Available in black or silver finish

Built to withstand high pressures and repeated thermal cycles.

These pipes alone have been dyno proven to provide your truck with up to 15 more horsepower and 21 Ft/lbs more torque. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler and pipe kit again.

Compatible with the 2011-2014 Ford F-150 EcoBoost with 50 DegreeF (28 DegreeC) reduction in AIT
88% increase in core size, 66% increase in internal core volume and 40% increase in external fin surface area

✓ Improved Airflow Efficiency

Streamlined end tanks reduce pressure drop and support higher CFM at elevated boost levels.

✓ Mishimoto Lifetime Warranty

Covers both the intercooler and workmanship—added peace of mind.

Why Upgrade the 2011–2014 F-150 EcoBoost Intercooler?

The OEM intercooler on early EcoBoost F-150 models is known for:

Heat soak under towing loads

Condensation issues

Power loss during repeated acceleration

Limited headroom for tuning

The Mishimoto MMINT-F150-11KBSL addresses all of these issues with a robust, proven cooling solution engineered specifically for the EcoBoost platform.

1/4″ NPT drain plug incorporated into lower mount, 2.5″ aluminum hot-side intercooler pipes replace stock plastic pipes,
10% greater flow than stock, 41% and 34% increase in internal volume for hot and cold-side pipes, respectively
Intercooler available in Sleek Silver or Stealth Black, pipes available in polished or wrinkle black powder-coated finish and Mishimoto Lifetime Warranty