maXpeedingrods H-Beam Connecting Rods+ARP 2000 Bolts for Nissan KA24E KA24DE Engine Conrods for Nissan 240SX/Stanza/Access/Nissan Prairie/Pathfinder/Terrano II/Pintara/Hardbody

Why Upgrading KA24 Rods Matters

The KA24 platform is known for taking abuse—but once you push power (especially turbo builds), the stock rods become the weak link.

• Factory rods = limited strength under boost

• Higher cylinder pressure = increased stress

• Stock hardware = not built for serious builds

Upgrading to H-beam forged rods gives your engine the strength it needs to handle real power.

【Fitment】For NISSAN KA24 KA24DE
【Dimension】Center to center length: 165mm/6.496″; Big end diameter: 53.01mm/2.087″; Small end diameter: 21mm/0.827″; Big end width: 24.77mm/0.975″; Small end width: 24.77mm/0.975″

What Makes H-Beam Rods Better

H-beam rods are designed for strength and durability under high loads.

• Stronger beam design for improved load handling

• Better resistance to bending and deformation

• Ideal for turbocharged and high-performance builds

• Increased reliability at higher horsepower levels

This isn’t just an upgrade—it’s insurance for your entire engine build.

【Bolts】 Including ARP 2000 3/8″ bolts (Note: Extra cost for upgrading to ARP L19 bolts)

ARP 2000 Bolts = Serious Clamping Power

Let’s talk about the part people overlook—the rod bolts.

This kit includes ARP 2000 bolts, which are a massive upgrade over factory hardware:

• High tensile strength for extreme conditions

• Improved clamping force at high RPM

• Proven reliability in performance and racing applications

Because even the strongest rods are useless if the bolts fail.

【H-beam Conrods Quantity】4 Pieces as showing in picture

Built for the KA24 Platform

These rods are compatible with:

• Nissan KA24E (SOHC)

• Nissan KA24DE (DOHC)

Found in vehicles like:

• Nissan 240SX

• Nissan Stanza / Pintara

• Nissan Hardbody (D21)

• Nissan Pathfinder / Terrano II

• Nissan Prairie / Access

Perfect for everything from street builds to full turbo setups.

【Warranty】maXpeedingrods warrants its products against manufacturing defects in materials and workmanship for 1 year from the date of purchase, and provides unlimited technical support and customer service

Ideal for Turbo & High Horsepower Builds

If you’re planning to push your KA beyond stock power levels, these rods are basically mandatory.

• Supports higher boost levels

• Handles increased cylinder pressure

• Reduces risk of catastrophic engine failure

• Provides a solid foundation for performance builds

Because building power without strengthening internals is just asking for problems.

Real-World Benefits

Once installed (and properly built around), you get:

• Increased engine reliability under load

• Confidence running higher boost and power

• Stronger bottom end for aggressive driving

• Peace of mind when pushing your build

Basically, you can stop worrying about your rods every time you hit boost.

Installation Notes (Not a Beginner Job)

Let’s be real—this isn’t a bolt-on part.

• Requires engine teardown and rebuild

• Proper torque specs and measurements are critical

• Balancing and clearances must be checked

• Best installed during a full engine build

If you’re here, though… you already knew that.

Why This KA24DE H beam connecting rods ARP 2000 maXpeedingrods Upgrade Makes Sense

If you’re serious about building a KA24, upgrading the rods isn’t optional—it’s essential. The maXpeedingrods H-beam rods with ARP 2000 bolts give you the strength and reliability needed to support real performance.

Because building a turbo KA without forged rods is basically just planning your next engine failure.