GT3582 Turbo Charger with Gaskets Turbo Turbocharger AR.70/63 600HP Replacement for Honda K20 H22 F22 Fo-rd 4.6, 5.0 Engines, All 4/6 Cylinder and 2.5L-6.0L Engines GT35 GT3582R Vahaha

Core Specifications

• Model: GT35 / GT3582R

• Compressor A/R: .70

• Turbine A/R: .63

• Power Support: Up to ~600HP (engine dependent)

• Includes gasket set

• Designed for high-flow turbo applications

Large-frame airflow. Serious commitment required.

Honda Applications

Frequently used on built:

• Honda K20

• Honda H22

• Honda F22

Ideal for forged internal builds, high boost setups, and standalone ECU tuning.

What is a Turbocharger?

• A turbocharger, (or turbo), is a turbine-driven forced induction device that increases an internal combustion engine’s efficiency and power output by forcing extra air into the combustion chamber.
• This improvement over a naturally aspirated engine’s power output is due to the fact that the compressor can force more air—and proportionately more fuel—into the combustion chamber than atmospheric pressure alone.
• The objective of a turbocharger is to improve an engine’s efficiency by increasing the density of the intake gas (usually air), thereby allowing more power per engine cycle.

Specifictions

Bearing Type:	Floating Bearing
Cooling Type:	Water + Oil Cooling
Horse Power:	Up to 600HP
Waste-gate:	External Waste-gate

Oil feed/inlet:	M10*7/16-24
Oil drian/outlet:	2*M8*1.25
Water inlet/outlet:	M14* 1.5
Maximum PSI:	22

Ford Applications

Also commonly paired with:

• Ford Modular 4.6L

• Ford Coyote 5.0L

On V8 platforms, this turbo supports strong mid-to-top-end power when matched with the proper manifold and fueling.

---

Performance Characteristics

• Later spool than smaller frame turbos

• Strong top-end horsepower

• High airflow capacity

• Suitable for drag and roll racing builds

Not ideal for stock daily motors. Perfect for built setups.

Fit for the Following

• Replacement for Honda K20, H22, F22 Engines
• Replacement for Nissan SR20DET, RB20/25
• Replacement for Toyota 1JZ/2JZ, 7MGTE
• Replacement for Ford 4.6, 5.0 Engines
• Replacement for GM, SBC, LSx Twin Turbos
• Perfect for all 4/6 cylinder and 2.5L-6.0L engines.

Note: This is universal application turbo, so modification might be required for some vehicles.

Part Number

• GT35
• GT3582R
• GT3582 (AR.70/63 600HP)

Compressor

Compressor Trim:	56.9
Compressor A/R:	0.7
Inducer Diameter:	61.5 mm

Exducer Diameter:	81.5 mm
Compress Inlet Size:	4 inch (103.5mm)
Compressor Outlet Size:	2.5 inch (63.6mm)

Turbine

Ex-haust Inlet Flange:	T3 Flange
Ex-haust Outlet Flange:	4-Bolt
Turbine Trim:	84.2

Turbine A/R:	0.63
Inducer Diameter:	68mm
Exducer Diameter:	62.4mm

Product Details

What You’ll Need

To safely run a GT3582:

• Proper turbo manifold (verify flange type)

• Upgraded injectors and fuel pump

• Intercooler system

• ECU tuning solution

• Strong drivetrain support

Because 600HP without preparation equals broken parts.

Final Verdict

The GT35 / GT3582R Turbocharger (.70/.63) is a high-horsepower solution for serious Honda and Ford builds. When paired with the right supporting mods, it delivers aggressive boost capability and strong top-end power.

Just make sure the engine build matches the ambition.