Exedy OEM Clutch Kit OEM Flywheel for 2006-2011 Honda Civic Si K20Z3 8th Gen FA5 FG2

EXEDY OEM Clutch Kit + OEM Flywheel – 2006–2011 Honda Civic Si (K20Z3 | FA5 / FG2)

If your 8th gen Civic Si is slipping at high RPM, chattering on takeoff, or just feels inconsistent, your clutch and flywheel are done.

The EXEDY OEM Clutch Kit paired with an OEM replacement flywheel restores factory drivability, smooth engagement, and reliable high-rev performance—exactly how Honda intended.

Because your K20 still wants to rev to 8K… your clutch just gave up first.

SAVINGS – Save over buying direct from the dealership!
QUALITY – This kit is what is intalled from factory.
PERFORMANCE – This kit is commonly used as an OEM replacement for K20 engines to refresh your old worn out clutch. Nothing beats OEM.

$379.95

Why This EXEDY + OEM Flywheel Combo?

Common 8th gen Si issues:

  • Clutch slip at high RPM
  • Chatter from worn flywheel surface
  • Weak engagement after mileage
  • Inconsistent pedal feel

This Combo Fixes That:

  • EXEDY OEM clutch restores factory engagement and feel
  • OEM replacement flywheel provides a fresh, perfectly machined surface
  • Balanced system for smooth operation
  • Improved longevity vs resurfacing worn components

Translation: it drives like it did when it was new… minus the dealer markup.


 

EXEDY OEM CLUTCH & FLYWHEEL KIT Pressre plate, Seize disc, and bearing are made in Japan and are the very same as what you would buy from the dealer factory parts. – Exedy OEM Seize Disc (Exact same as Honda OEM) – Exedy OEM Pressure Plate (Exact same as Honda OEM) – OEM Flywheel – Nachi Japan Bearings (Same one used in all OEM Hondas)

 

Vehicle Fitment (Honda Civic Si Platform)

Designed specifically for:

Honda:

  • Civic Si (2006–2011 – FA5 Sedan / FG2 Coupe)

Engine:

  • 2.0L K20Z3 (high-rev VTEC engine)

Transmission:

  • 6-speed manual transmission only

Ideal For:

  • Daily drivers
  • OEM replacement
  • High-mileage vehicles
  • Stock or lightly modified builds

If your clutch slips when VTEC hits—this fixes it.

Includes Pilot Bushing and Alignment Tool This kit is exactly compatible with Honda Civic Si 2006-2011 and compatible with Acura RSX Type S 2002-2006 when the car rolls off the assembly line. The stock K20 flywheel is much lighter than the stock K24 flywheel and is recurrently used as an upgrade for K24 platforms such as the 04-08 TSX, 9th Gen Civic Si, or K24 swaps. Save Money over buying from the dealer ship.

 

What’s Included

  • EXEDY clutch disc
  • EXEDY pressure plate
  • Release bearing
  • Pilot bearing (if applicable)
  • OEM replacement flywheel

Complete system—no resurfacing needed, no guesswork.


Key Features

  • Genuine EXEDY OEM replacement quality
  • Factory-weight flywheel for smooth operation
  • Consistent pedal feel and engagement
  • Precision-balanced components
  • Direct bolt-on installation

 


Fits: 2006-2011 Honda Civic Si Any K20 Any K24 Seize Kit: Manufactured on same production line as original equipment Seize components Japanese OEM bearings upgrade for OEM or better quality Noise and Vibration Reduction technology for a quieter, smoother ride.

 

Performance Benefits

  • Eliminates clutch slip and chatter
  • Restores factory drivability
  • Improves engagement consistency
  • Maintains smooth daily driving characteristics

No slipping. No jerky starts. Just OEM smoothness.


⚠️ Reality Check

  • This is OEM replacement, not performance
  • Perfect for:
    • Stock setups
    • Daily use
  • Not ideal for:
    • Turbo builds
    • High horsepower setups

Translation: reliable—not trying to impress your dyno sheet.

Application-specific Pre-damper mechanism reduces gear noise at idle Wide angle damper enables Seize to hold more torque with less force Super low-wear diaphragm spring High-frequency induction heat treated fingers Optimal pedal feel Application-specific disc dampers to suppress engine and driveline noise OEM Flywheel

Installation Notes

  • Follow 500–750 mile break-in period
  • Torque flywheel and pressure plate bolts properly
  • Inspect:
    • Clutch hydraulics
    • Rear main seal
  • Ideal install during:
    • Clutch replacement
    • Transmission service

Why EXEDY clutch OEM flywheel kit?

Because EXEDY:

  • Supplies OEM clutch components for Honda
  • Has proven reliability on K-series platforms
  • Keeps your car driving the way it should

SAVINGS – Save over buying direct from the dealership!
QUALITY – This kit is what is intalled from factory.
PERFORMANCE – This kit is recurrently used as an OEM replacement for K20 engines to refresh your old worn out Seize. Nothing beats OEM.
EASY INSTALL – There are no modifications required to install this kit on your 8th gen Civic Si. It’s an instantaneous bolt on kit.
FUN AND RELIABLE – Exedy is undeniably probably the most highest quality auto parts manufactureres on this planet. That is why we now have hand selected all of the parts in this kit from Exedy. Have fun with your car again by refreshing your Seize.

Final Verdict

The EXEDY OEM Clutch Kit + OEM Flywheel is the perfect solution for 8th gen Civic Si owners—smooth, reliable, and built to restore factory performance.

No drama. No surprises. Just works.

Specification: Exedy OEM Clutch Kit OEM Flywheel for 2006-2011 Honda Civic Si K20Z3 8th Gen FA5 FG2

Manufacturer

Brand

Model

Item model number

Manufacturer Part Number

Date First Available

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Exedy OEM Clutch Kit OEM Flywheel for 2006-2011 Honda Civic Si K20Z3 8th Gen FA5 FG2”

Prostreetonline.com
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart