Key Features
✔ Fits 1999–2016 Ford Super Duty (8 ft Bed)
Engineered specifically for long-bed F250/F350/F450/F550 models. No guessing, no measuring twice, no “why is this thing three inches short?”
✔ Hard Tri-Fold Composite Panels
Strong, impact-resistant design that keeps your cargo secure and your truck looking like the workhorse it is.
Product description
99-16 Ford F250 F-350 F-450 F550 Super Duty
Fits Models with 8Ft Fleetside / Styleside Bed
Because Super Duty drivers don’t mess around with weak gear. The TTC-HARD-009 delivers the durability, security, and proportional ruggedness a long-bed F-series deserves — all without paying the “commercial fleet” premium.
Hard Solid Tri-Fold Tonneau Cover
Powerful Frames And Clamps
Rubberized Edges To Seal
Llighting Sight
Double Pvc and UV protection
Related Products
 Hard Solid Tri-Fold |
 Soft Vinyl Roll-Up |
 Soft Tri-Fold Adjustable |
|---|---|---|
|
Exterior Bump Textured Surface |
Exterior Anodized / Matte |
Exterior Matte |
|
Material Aluminum Plating |
Material Vinyl |
Material Vinyl |
Brad –
Fits ok on a 01 f250 8’ box. It’s more square than the bed and the rear is hard to get aligned. Quality seems great and has not leaked at all. If the rear was an inch narrower in width and a half inch longer it would have been 100% perfect. Definitely seems sturdy and well worth the price.
Cynthia Thorpe –
Ordered this for my husband as a gift. He loves it!!! Easy to install and convenient as well as easy to use. Provides excellent coverage, keeping the truck bed dry and prevents cats from getting into our trash! Reasonable price and sturdy.
Jonas –
~25 mins all by myself.The package was beat to @#%$. But all the parts were there, it wasn’t hard to figure out and looks pretty good. We’ll see how the mileage works out.This DOES fit 2014 Super Duty. 6.5-6.8 ft bed fits just fine.
David Williams –
Great product
Ed –
As advertised! Fit my truck perfect!
ToughCookie –
Put this on my F250 long bed. The instructions are a joke! They might as well not have included any. Even the pictures are terrible and they tell you absolutely nothing about how to put this on. Here is a direct quote from one of the statements under a picture that shows a knob. “Though tighten the nut of clubs that the card buckle will fixed on the sidebar” WHAT??? They are ALL totally gibberish. VERY frustrating! These are more frustrating than having none at all. As for the cover, it seems well made and strong like they say, but the clamps that tighten it down are a pain. You have to wiggle and work them to get them under the side rail which is especially difficult from the ground. And they don’t seem tight enough to hold it from moving around. I guess I’ll find out. The section closest to the cab must stay down so if you need to open the entire bed, you’ll have to remove the whole cover. It does NOT fold up behind the cab. The tail gate is also very difficult to close with the cover on. The cover must be clamped down prior to closing the tailgate. The edge of the tailgate catches on the seal under the cover as you try to close it. If I were to slam the tailgate I’m sure it would rip the seal right off the cover. So I have to pry the lid up a little with my fingers and slide the leading edge of the tailgate under it gently to prevent that. I will try adjusting the position as I go to see if there is a better position that allows the tailgate to close. Overall I wouldn’t recommend this cover. I haven’t decided if I’ll keep it yet. I may take it off and return it.
Vision1 –
This tonneau is quite less in cost than others, but has two features I love. It has a catch/attachment point on each section AND is hard/sturdy enough to actually put something on loading/unloading your vehicle. To be clear, I don’t put bags of concrete up there just to test it, but putting the groceries, a box, etc. is of no worries. Keeps out the water in the car wash and is easy clean. Highly recommend this as an option if you’re not brand associated. Ours was still like new when we traded the truck a year later THEN we repurchased the same thing for our new vehicle [larger bed, so it wouldn’t fit]Easy install for one person. Just slide it folded onto your bed [think about how it needs to unfold first, made that mistake 🙂 ] unfold the entire unit then line it up properly BEFORE attaching the front clips. Then attach the front, attach the middle, last section, good to. 30-45 min from opening the box to full installed and cleaned up cardboard. One person install.
Alvin Weaver –
I was a bit apprehensive after reading some of the poor reviews but, went ahead and purchased the bed cover anyway. Install was on a 2011 f250 quad cab 4×4 with 6.5 bed (standard size bed for this truck). I am very pleased with the cover. Install was a breeze with or without instructions and honestly the color card included showing the orientation of the clamps is all you need. Looks great on truck, is very sturdy, easy install, great price, couldn’t ask for anymore for the price.