What an External Wastegate Actually Does
Quick version:
- Regulates boost pressure
- Diverts excess exhaust gas away from the turbo
- Prevents overboost and engine damage
Translation: it keeps your build alive when things start getting spicy.
Waste gates provide a means to control the boost pressure of the turbo charged engine. Waste gates work to bypass exhaust flow from the turbine wheel. Bypassing the exhaust flow reduces the power driving the turbine wheel to match the power required for a given boost level.
Why Go External Wastegate?
Compared to internal wastegates, this setup gives you:
- More precise boost control
- Better performance for high-boost builds
- Improved turbo efficiency
- Consistent boost under load
If you’re running serious power—external is the move.
Similar to the BOV, the Waste gates uses boost pressure and spring force to regulate the flow bypassing the turbine. Waste gates are bolted to exhaust manifold or header.
DNA Motoring 40mm external wastegate T22 – Key Features
- 40mm Wastegate Size
Ideal for most street and moderate performance turbo setups. - T22 Flange Design
Compatible with standard external wastegate manifold flanges. - High-Temperature Resistant Construction
Built to handle extreme exhaust heat and pressure. - Black Finish
Clean, stealth look under the hood. - Spring-Controlled Boost Regulation
Reliable and consistent boost management.
The advantage of external Waste gates is that the bypassed flow can be reintroduced into the exhaust stream further downstream of the turbine. This tends to improve the turbine’s performance.
What It Does Best
- Prevents dangerous overboost conditions
- Improves turbo response and efficiency
- Stabilizes boost pressure under load
- Extends engine and turbo life
High Strength Cast Body; Fits any 40mm Standard V-Band Waste gate Port
Anodized Aluminum Top Finish; Stainless Steel Wieldable Flange Inlet / Outlet Flanges
Barbed Fittings; Comes with Preinstalled 14-Psi Spring
Comes with Preinstalled 14-Psi Spring; Stainless Steel Sealing Ring
Easy to Remove Locking Collar for Fast Spring Changes
Performance Benefits
With proper setup:
- Smoother, more consistent boost curves
- Faster spool characteristics
- Better control at higher boost levels
Basically—more power, but controlled power.
What It Won’t Do
Let’s be realistic:
- Doesn’t tune your engine
- Doesn’t include boost controller (manual/electronic sold separately)
- Won’t fix a bad turbo setup
This is a critical component, not a complete solution.
Who Is This For?
- Turbo LS, Honda, Subaru, or custom builds
- Enthusiasts running higher boost setups
- Anyone upgrading from an internal wastegate
If you’re serious about boost—you need this.
Installation Notes
- Professional installation recommended
- Requires proper vacuum/boost reference lines
- Works best with a boost controller for fine tuning
(Pro tip: Set your spring pressure correctly—guessing is how engines disappear.)
Why DNA MOTORING?
Because they offer budget-friendly turbo components that get the job done—perfect for builds that prioritize performance without overspending.
Final Verdict
The DNA MOTORING WG-TS-40MM-T22-BK External Wastegate is a must-have for anyone running a turbo setup who wants reliable boost control, improved performance, and engine protection.
Control the boost. Protect the build.
And avoid learning the hard way what “overboost” means.
There are no reviews yet.