
If you drive a late-model Toyota Camry, RAV4, Corolla or Highlander, a Lexus RX or ES, or a Mazda CX-9, there’s a good chance the cabin filter behind your glove box is the same size: the one FRAM sells as the CF12157 cabin air filter. That makes shopping easier, because many brands make a filter to the same size and list it by that number. It also means a few details are worth checking, starting with the part number on the filter you’re replacing.
For the replacement steps and how often to change it, see our sister site’s Cabin Air Filter Replacement Made Simple. This post is about getting the right filter for these vehicles.
Check the number on the old filter
Replacement filters are usually sold by a cross-reference number rather than by vehicle. For this size you’ll commonly see:
- FRAM CF12157 (aftermarket reference most listings use)
- Toyota 87139-0E040 and related Toyota numbers such as 87139-58010
- Mazda TK48-61-J6X
If the filter in your car carries one of these numbers, a CF12157-type replacement is the place to start. If it shows a different number, look that number up instead of assuming the size matches.
Vehicles listed for the CF12157 cabin air filter
FRAM’s application data for CF12157 covers Toyota, Lexus and Mazda models from the 2016 model year on. These are some of the vehicles it lists:
| Make | Models in FRAM’s CF12157 list |
|---|---|
| Toyota | Camry, Corolla, Corolla Cross, RAV4, RAV4 Prime, Highlander, Prius, Prius Prime, Prius AWD-e, Avalon, Sienna, Venza, C-HR |
| Lexus | ES250, ES300h, ES350, NX250, NX350, NX350h, NX450h+, RX350, RX350L, RX450h, RX450hL, UX200, UX250h |
| Mazda | CX-9 |
Start years vary by model. For example, the RX350 and Prius are listed from 2016, the Camry from 2018, and the RAV4 and Corolla from 2019. Check your exact year.
Two caveats from the replacement-filter listings:
- Toyota C-HR: listings for 2018–2022 limit fitment to Japan-built cars (VIN starting with “J”).
- Subaru: several replacement brands also list Subaru models such as the Ascent, Crosstrek, Impreza, Legacy and Outback, cross-referenced to Subaru part 72880-FL00A. FRAM’s CF12157 list doesn’t include Subaru, so Subaru owners should match the number on their old filter rather than going by the CF12157 label.
Three CF12157-type filters in our store
| Filter | Media (per the listing) | Makes listed | Cross-references listed |
|---|---|---|---|
| EPAuto CP157 | Particulate media with carbon | Toyota, Lexus, Subaru, Mazda | FRAM CF12157 and CF12436; Toyota 87139 numbers; Subaru 72880-FL00A; Mazda TK48-61-J6X |
| CARORY CF157 | Activated carbon with particulate filtration | Toyota, Lexus, Subaru, Mazda | FRAM CF12157 and CF12436; Toyota 87139 numbers; Subaru 72880-FL00A; Mazda TK48-61-J6X |
| Puroma CP157 replacement | Multi-layer with an activated carbon layer | Toyota, Lexus, Subaru, Mazda | CP157 / CF12157 |
All three are replacement-brand filters made to the CF12157 size, not Toyota or FRAM parts. EPAuto says so directly on its listing. Listings sometimes disagree on end years for the same model, so treat the cross-reference number as your main check.
What activated carbon adds
A basic cabin filter traps dust, pollen and other particles. A carbon layer is added to reduce odors and some outside fumes, and all three filters above include one. The sister-site article describes the trade-off: more filtration layers can mean slightly more airflow resistance. If you notice weaker airflow from the vents on high, a clogged or overdue filter is one of the first things to check.
Swapping it: interval and the airflow arrow
FRAM’s data lists this filter’s location as behind the glove box. The sister-site guide suggests replacing a cabin filter about every 12 months or 12,000 to 15,000 miles, sooner in dusty or high-pollen conditions, and recommends checking your owner’s manual for the vehicle’s own interval. When you install the new one, match the airflow arrow to the direction air moves through the housing. Using the old filter’s orientation as a guide is the simplest way to get it right.
