Transform Your Ride with 11.88×48” Self-Adhesive Car Light Tint Film — Style, Protection, and Easy Installation
- 【Installation Steps】:1.Cut the lamp to size, adding at least 5 cm for easier installation. 2.Clean the lamp’s surface with a towel. 3.Spray a little water on the lamp’s surface. 4.Spray a little water on the light film. 5.Straighten the light film to the position of the lights to stick. 6.Use a scraper to remove any bubbles from the light film. 7.Blow dry the curved areas with a hairdryer to help the film adhere better. 8.After heating, smooth out any remaining bubbles.
- 【Practical Design】:Three-layer film design, not easy to scratch tint film. The first layer is the protective film, the second layer is the tint film, and the third layer of the back film, the surface is smooth, self-adhesive, and easy to install. Note: Only retain the color film the other two layers are supposed to be torn off.
- 【Widely Applications】:The car tint film size is about 48×11.88 inches, can be cut arbitrarily for any shape of car lights, fit for protecting car headlights, taillights, and fog lights, and can also be used as a protective film for computers, tablets, and other products. Note: There is a slight color difference, please refer to the actual product.
- 【High-Quality Materials】:The car tint film is made of high-quality PVC material, which is stretchable, waterproof, and sunscreen, with better light transmission, which will not affect the original light source of the car, and will not hurt the car lights, which effectively protects the car lamps from scratches, helping improve driving safety at night or in rain or snow. It is also easy to disassemble and replace, with no residual adhesive when peeling, leaving no traces.
- 【Fashion Design】:Multi-color film is beautiful and fashionable, providing personalized choices, feeling the fun of automotive DIY, bringing a variety of sensory experiences, and enhancing the overall feeling of the body. Note: It is recommended that the dark black color film is only used on the taillights for your safety.
Want that stealthy, smoked-out look without breaking the bank? Meet your new favorite mod — the 11.88×48-inch Car Light Self-Adhesive Tint Film. Designed for headlights, taillights, brake lights, and fog lights, this premium vinyl wrap instantly transforms your ride from basic to bold.
Made from high-quality PVC vinyl, this car light tint film not only upgrades your style but also protects your lights from scratches, UV damage, and road debris. Its self-adhesive backing makes installation a breeze — just clean, peel, and apply. No heat guns, no bubbles, no drama. You can easily trim it to fit cars, trucks, or SUVs of any shape or size.
The 11.88×48” roll provides enough material for full light coverage, whether you’re blacking out your taillights, giving your headlights a subtle tint, or adding a smoked touch to your fog lamps. Plus, it’s removable — so you can change your look anytime without permanent damage.
Perfect for car enthusiasts who want an affordable, reversible way to customize their ride, this car light tint vinyl wrap protector is a must-have in every DIY modder’s toolkit.
Bill –
A quality product, on my motorcycle and truck.
Tabitha Placker –
The tint/vinyle was pretty dark and very difficult to get on because of the tightness of it, hard to stretch and had very little on the roll. I did not keep.
Homey –
I don’t have the talent necessary to get this done. Youtube makes it look so easy. But you seriously need the water sprayed on both sides to enable you to pull it off and try again. I used it to seal a cracked lens just to keep the water out. Looks like it will do that. Glad there is enough to do two because the one I did looks like it will need to be redone. glad its cheap vs 100 dollar lens replacement.
Audrey McCormick –
Not easy to install if you don’t know how to do it. Unless you tint, just get it done professionally
Amazon Customer –
I tried to get this film to work on a round headlight, like from an old vw bug, but even with a heat gun, it had wrinkles and gathers
Fred –
Great product. Got rear ended and needed a temporary fix for my rear tail lights and turn signals.
Pedro Perez –
Muy buena calidad
Hamza –
I would not buy this film if you are looking for a quality product. There were many bubbles when I was trying to install this on my car. I paid more for a higher quality film and had no issues at all.
Ozemu –
Great buy
Very good service