AutoMeter Gauge, Fuel Level, 2 1/16″, 240Ωe to 33Ωf, Elec, Marine Carbon Fiber (200760-40)

AutoMeter 200760-40 Marine Carbon Fiber Fuel Level Gauge (2-1/16″, 240Ω–33Ω) – Accurate Fuel Readings, No Guesswork

If your fuel gauge is more “suggestion” than reality, the AutoMeter Marine Carbon Fiber Fuel Level Gauge (240Ω empty to 33Ω full) fixes that immediately. Designed for marine and aftermarket setups, this gauge gives you precise, consistent readings—so you stop gambling on whether you’ll make it to the next gas station (or dock).

Requires AutoMeter sending unit 990345 or equivalent 240E/33F fuel level sender
12 and 16 volt compatible, well-suited with nearly every marine electrical system
Features Front Sealed Bezel Design For Added Water Resistance And Up Protected Paint On Dial Pointer For Added Protection Against Sun Damage

$64.99

Why Fuel Level Accuracy Matters

Running out of fuel isn’t just inconvenient—it can:

  • Damage fuel pumps
  • Cause lean conditions
  • Leave you stranded (always at the worst time)

This gauge ensures you actually know what’s in the tank instead of hoping for the best.


AutoMeter Gauge, Fuel Level, 2 1/sixteen”, 240Ωe to 33Ωf, Elec, Marine Carbon Fiber (200760-forty)

AutoMeter 200760-40 fuel level gauge – Key Features & Benefits

Electric Fuel Level Gauge (240Ω Empty – 33Ω Full)
Compatible with common marine and aftermarket fuel senders—especially Stewart Warner–style resistance ranges.

2-1/16″ (52mm) Standard Size
Fits most gauge pods, dash panels, and marine consoles—easy install anywhere.

Marine Carbon Fiber Face
Aggressive carbon fiber styling with marine-grade durability—looks good and holds up in harsh environments.

Electric Sender-Based Operation
Simple wiring—no mechanical linkage, just signal from your fuel sender.

Corrosion-Resistant Design
Built to handle moisture, humidity, and marine conditions without degrading.

Backlit Display
Clear visibility day or night without excessive glare.


Requires AutoMeter sending unit 990345 or an identical 240E/33F fuel level sender

What “240Ω–33Ω” Means (Important)

  • 240 ohms = Empty
  • 33 ohms = Full

⚠️ This MUST match your fuel sender. Common setups include:

  • Marine fuel tanks
  • Aftermarket fuel cells
  • Custom builds using Stewart Warner–style senders

Mismatch the resistance range, and your gauge will lie to you. Don’t do that.


12 and 16 volt compatible, smartly-suited with just about each marine electric system

Best Use Cases

  • Marine applications (boats, watercraft)
  • Custom fuel systems
  • Restomod builds
  • Engine swaps
  • Replacing inaccurate factory fuel gauges

Installation Notes (Match First, Install Second)

  • Verify sender resistance range (240–33Ω required)
  • Wire gauge to:
    • Power
    • Ground
    • Sender signal
  • Mount in dash or panel
  • Test before final install

Options Front Sealed Bezel Design For Added Water Resistance And Up Secure Paint On Dial Pointer For Added Protection Against Sun Injury
Package Dimension : 11.4 cms L x 12.3 cms W x 12.7 cms H

Pro Tip (Avoid the “Why Am I Out of Gas?” Moment)

Always match your gauge + sender resistance range.
Wrong combo = wrong readings = bad day.


Is AutoMeter 200760-40 fuel level gauge Worth It?

If you’re running a compatible sender—yes, absolutely.

You get:

  • Accurate fuel level monitoring
  • Durable marine-grade construction
  • Clean carbon fiber styling
  • Reliable performance in harsh environments

Because guessing your fuel level is fine… until it isn’t.

Specification: AutoMeter Gauge, Fuel Level, 2 1/16″, 240Ωe to 33Ωf, Elec, Marine Carbon Fiber (200760-40)

Brand

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “AutoMeter Gauge, Fuel Level, 2 1/16″, 240Ωe to 33Ωf, Elec, Marine Carbon Fiber (200760-40)”

Prostreetonline.com
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart