What’s Included?
The Bosch 22A22B package contains:
1 × Bosch ICON 22A
and:
1 × Bosch ICON 22B.
Both have a nominal length of:
22 inches / approximately 559mm.
However, they serve different application roles.
That distinction is critical.
22A and 22B Are Not the Same Blade
This is the most important feature to understand about this package.
Both blades are:
22 inches long.
But that does not mean:
22A = 22B.
Bosch uses A and B designations to account for different windshield applications and curvature requirements.
Bosch’s application guidance explains that the driver-side ICON blade is an:
A blade.
Depending on the vehicle, the passenger side may require either:
A or B.
A B-series passenger blade incorporates greater curvature for applications requiring it.
Therefore, a vehicle specified for:
22A + 22B
should receive that exact combination.
Why Does Windshield Curvature Matter?
Automotive windshields are curved in multiple directions.
The driver and passenger sides can also have different effective curvature across the wiper sweep.
A blade must remain against that surface throughout its movement.
If the blade does not match the application properly, it can produce:
- Streaking
- Edge lift
- Skipping
- Missed sections
- Poor windshield contact
This is why two wipers can both measure 22 inches yet still have different application requirements.
Bosch ICON 22A
The first blade in the package is:
Bosch ICON 22A
measuring:
22 inches / approximately 559mm.
In this application pairing, the 22A serves as the driver-side blade.
Bosch identifies the driver-side ICON application with its A designation.
Bosch ICON 22B
The second blade is:
Bosch ICON 22B
also measuring:
22 inches / approximately 559mm.
The B designation identifies an application-specific passenger blade with greater curvature where required.
This allows the wiping edge to better conform to the passenger side of compatible windshields.
Why Not Just Install Two 22A Blades?
Because nominal blade length is only one part of wiper design.
If Bosch specifies:
22A + 22B
for a particular vehicle, installing:
22A + 22A
may not provide the intended passenger-side windshield contact.
Potential symptoms can include:
- Passenger-side streaking
- Poor edge contact
- Uneven pressure
- Missed glass
- Blade lift
Follow Bosch’s vehicle-specific application data instead of assuming two equal-length blades should be identical.
Current Bosch ClearMax 365 Technology
Current Bosch ICON product information describes the line as using:
ClearMax 365
wiping technology.
The design combines a soft rubber core with a protective shell engineered to help shield the wiping edge from debris and environmental exposure.
Bosch positions the technology around:
- Smooth wiping
- Reduced friction
- Quieter operation
- Environmental durability
- Consistent windshield clearing
For current Bosch information:
What About fx Dual Rubber?
The supplied product listing describes ICON as using:
fx dual rubber technology.
That terminology has appeared in Bosch ICON descriptions and remains common in third-party product listings.
Bosch’s current ICON materials emphasize:
ClearMax 365.
For a current Pro Street listing, using the newer ClearMax 365 terminology avoids mixing older and current Bosch product language.
Premium Beam-Blade Design
Bosch ICON uses a:
frameless beam structure
rather than the exposed articulated metal framework found on conventional windshield wipers.
The internal supporting structure is designed to distribute pressure continuously along the wiping edge.
Potential advantages include:
- Better windshield conformity
- Consistent pressure
- Fewer exposed joints
- Lower aerodynamic profile
- Reduced frame-related snow accumulation
Tension Spring Arcing
Bosch ICON uses tension spring arcing designed to adapt the blade to windshield curvature.
Rather than applying force at only several external frame points, the beam structure distributes pressure along the blade.
That can help reduce:
- Streaking
- Skipping
- Edge lift
- Uneven contact
- Missed sections
The different 22A and 22B applications demonstrate exactly why windshield curvature is an important part of Bosch ICON fitment.
Integrated Asymmetric Spoiler
Bosch ICON incorporates an:
asymmetric aerodynamic spoiler
designed to help maintain blade pressure against the windshield as vehicle speed increases.
At highway speeds, airflow can create enough force to reduce wiper contact.
This is commonly referred to as:
wiper lift.
The spoiler helps counteract that aerodynamic effect.
Why High-Speed Wiper Contact Matters
During a highway rainstorm, a wiper must manage:
water volume + aerodynamic load.
If the blade begins lifting from the windshield, even slightly, it may leave:
- Streaks
- Missed water
- Unwiped areas
Maintaining blade contact is particularly important in the driver’s primary viewing area.
Up to 40% Longer Performance Life
Bosch advertises ICON as providing:
up to 40% longer performance life than other premium wiper blades.
This should be understood as Bosch’s comparative manufacturer claim rather than a guaranteed replacement interval.
Actual wiper life depends on:
- UV exposure
- Heat
- Ozone
- Rain
- Snow
- Ice
- Road salt
- Windshield contamination
- Frequency of use
Environmental conditions can dramatically affect windshield-wiper lifespan.
Hook-Style Wiper Arm Compatibility
The supplied application information describes these blades as compatible with appropriate:
9x3mm hook arms
and:
9x4mm hook arms.
These traditional U/J-hook connections are common on many vehicles.
Always confirm the actual vehicle application before purchase.
Not Compatible With Every Wiper Connection
The 22A22B package should not be described as universal.
The supplied product information specifically states that this configuration is not intended for applications requiring:
- Side-lock
- Pinch-tab
- Top-lock
Those vehicles may require Bosch ICON blades with an appropriate:
OE suffix.
Bosch ICON A/B vs. OE Blades
These designations address different fitment considerations.
A and B
Primarily help distinguish:
application and windshield curvature
within compatible ICON blade configurations.
OE
Identifies ICON applications designed around certain factory-style wiper-arm connections.
A vehicle can therefore require the correct:
length + curvature + connection
before a blade will fit and wipe correctly.
Do Not Buy Wiper Blades by Length Alone
The Bosch 22A22B bundle is an excellent example of why this matters.
Both blades measure:
22 inches.
Yet Bosch specifies:
22A for one side
and:
22B for the other.
That alone demonstrates why measuring the old blade with a tape measure is not enough to guarantee correct replacement.
Always verify:
Vehicle Type → Year → Make → Model → Wiper Application
before ordering.
Quick Hook-Arm Installation
Installation is straightforward when the vehicle uses the supported hook connection.
The general procedure is:
- Raise the wiper arm.
- Rotate the existing blade.
- Release the old blade from the hook.
- Remove it from the arm.
- Align the Bosch ICON adapter.
- Slide the hook into the adapter.
- Confirm the blade locks securely.
- Lower the blade carefully.
- Repeat for the opposite side.
Make sure the:
22A and 22B are installed in their correct positions.
Do not simply install whichever blade you happen to grab first because they are both 22 inches long.
Protect the Windshield During Installation
Place a folded towel against the windshield while changing the blades.
Once the wiper blade is removed, the spring-loaded metal arm can snap back against the glass.
That can potentially chip or crack the windshield.
A towel costs almost nothing.
A windshield replacement remains impressively committed to the opposite pricing strategy.
Clean the Windshield First
Before installing the new ICON blades, clean the windshield thoroughly.
Remove:
- Road film
- Dirt
- Bugs
- Tree sap
- Wax
- Grease
- Silicone residue
Contaminated glass can make new wipers:
- Chatter
- Skip
- Smear
- Streak
Test Both Blades After Installation
Once the 22A and 22B are installed:
- Apply windshield washer fluid.
- Run the wipers at low speed.
- Verify full windshield contact.
- Check the passenger-side curvature carefully.
- Confirm the blades do not interfere.
- Increase wiper speed.
- Verify both adapters remain secure.
Look for:
- Streaking
- Skipping
- Edge lift
- Chatter
- Missed areas
Signs Your Old Wipers Need Replacement
Common symptoms include:
- Streaking
- Smearing
- Squeaking
- Chatter
- Skipping
- Cracked wiping edges
- Hardened material
- Torn wiping surfaces
- Missed windshield areas
Reduced wet-weather visibility is the most important indicator.
Check the Wiper Arms
Even premium Bosch blades require properly functioning wiper arms.
Inspect for:
- Corrosion
- Weak spring pressure
- Bent arms
- Damaged hooks
- Loose hardware
A weak or bent arm can cause poor wiping even when the correct blade is installed.
Inspect the Washer System
While replacing the blades, inspect:
- Washer-fluid level
- Washer pump
- Washer hoses
- Spray nozzles
- Nozzle alignment
Wipers work best when the washer system can properly loosen dirt and road contamination.
Bosch ICON vs. Conventional Wipers
Conventional Wiper
Uses:
articulated external frame + multiple pressure points.
Bosch ICON
Uses:
frameless beam construction + tension spring arcing.
Potential ICON advantages include:
- Better curved-glass conformity
- More continuous pressure
- Reduced exposed hardware
- Improved aerodynamics
- Fewer frame joints for snow accumulation
Bosch ICON 22A22B vs. Two Generic 22-Inch Blades
This is where the Bosch application-specific design becomes particularly relevant.
Generic 22″ + 22″ Set
Typically emphasizes:
- Equal blade lengths
- General beam construction
- Broad connector compatibility
- Lower price
Bosch ICON 22A22B
Adds:
- Specific 22A driver blade
- Specific 22B passenger blade
- Application-specific curvature
- Bosch beam construction
- ClearMax 365 technology
- Tension spring arcing
- Integrated asymmetric spoiler
For a vehicle specifically calling for 22A22B, the correct Bosch pairing is more precise than simply buying two generic 22-inch blades.
Bosch ICON vs. Rain-X Repellency
Both are premium beam-style options, but their emphasis differs.
Bosch ICON
Focuses on:
- Application-specific blade geometry
- ClearMax 365
- Tension spring arcing
- Aerodynamic control
- Wiping-edge performance
Rain-X Repellency
Focuses on:
- Water-repellent windshield treatment
- Hydrophobic water beading
- Premium beam construction
- Broad multi-fit adapter support
For additional comparisons:
Best Windshield Wiper Blades for Clearer Drives
All-Season Performance
Bosch ICON is engineered for year-round windshield use.
That includes:
- Rain
- Highway spray
- Summer heat
- Cold weather
- Snow
The frameless design also eliminates many exposed articulated joints found on traditional framed blades.
Winter Wiper Care
Beam blades can reduce frame-related snow accumulation, but they are not designed to scrape heavy ice.
Before operating frozen wipers:
- Defrost the windshield.
- Remove heavy snow.
- Free the blades from the glass.
- Remove substantial ice.
Do not use the wiper motor to break frozen blades loose.
Summer Wiper Care
Hot windshield temperatures and UV exposure can deteriorate wiping material.
Inspect your blades periodically for:
- Cracks
- Hardening
- Deformation
- Uneven wiping
Wipers continue aging even when the weather is dry.
Replace Both Front Blades Together
The Bosch 22A22B bundle allows both front blades to be replaced during the same service.
Because both have typically experienced similar:
- Age
- Heat
- UV
- Rain
- Snow
- Ozone
replacing them together helps restore consistent windshield clearing.
Who Should Buy Bosch 22A22B ICON Wipers?
This package is intended for vehicles specifically requiring:
Bosch ICON 22A + Bosch ICON 22B
with a compatible hook-style connection.
It is particularly suited to buyers looking for:
- Two 22-inch front blades
- Application-specific driver/passenger geometry
- Premium beam construction
- ClearMax 365 technology
- Tension spring arcing
- Aerodynamic blade control
- All-season performance
Why Buy Bosch 22A22B ICON Wiper Blades?
Key features include:
- Bosch ICON 22A + 22B pairing
- Two 22-inch blades
- Application-specific A/B geometry
- ClearMax 365 wiping technology
- Premium beam construction
- Tension spring arcing
- Integrated asymmetric spoiler
- Compatible hook-arm applications
- 9x3mm / 9x4mm hook support where specified
- All-weather design
- Bosch up-to-40%-longer-life claim versus other premium blades
Important Fitment Warning
Do not substitute two generic 22-inch blades simply because Bosch 22A and 22B have the same nominal length.
Before ordering, verify:
Vehicle Type → Year → Make → Model → Wiper Arm → Bosch Application
Also remember:
22A and 22B are not automatically interchangeable.
Applications using side-lock, pinch-tab, top-lock or other factory-style connections may require the appropriate Bosch OE-series blade instead.
Related Pro Street Guide
For help comparing Bosch ICON with conventional, silicone and water-repellent wipers:
Best Windshield Wiper Blades for Clearer Drives
Bosch References
For current Bosch ICON technology:
For current ICON product information:
There are no reviews yet.