Supplied Audi Fitment
According to the supplied product listing, the blades are marketed for select applications within the following Audi model ranges:
| Audi Model | Supplied Model-Year Range |
|---|---|
| Audi A4 | 2009–2024 |
| Audi S4 | 2009–2024 |
| Audi Q5 | 2018–2024 |
| Audi SQ5 | 2018–2024 |
| Audi Q3 | 2019–2024 |
| Audi A5 | 2010–2024 |
| Audi S5 | 2008–2024 |
| Audi RS5 | 2013–2024 |
The listing also references Audi allroad applications, but an exact allroad year range is not clearly established in the supplied information.
Do not treat these broad ranges as proof that every trim, body style and production date within them uses this exact blade set.
Verify the specific vehicle before ordering.
Why Audi Wiper-Arm Type Matters
The biggest mistake a buyer can make with this product is ordering by blade length alone.
The supplied listing specifically states:
NOT FOR U/J-HOOK WIPER ARMS.
Many aftermarket blades use a common curved J-hook attachment.
Compatible Audi applications instead use an OE-style locking connection.
A 24-inch blade can therefore be the correct length and still be completely wrong for the car.
Check the Connector Before Ordering
Before buying, inspect the end of the existing Audi wiper arm.
You are looking for a factory-style connection compatible with the supplied pre-mounted adapter.
Do not order this set if the vehicle has a conventional:
U-hook or J-hook arm
unless the seller’s vehicle-specific fitment data explicitly confirms compatibility.
What Does Factory-Style Fit Mean?
The supplied blades use a pre-mounted adapter intended to resemble the installation arrangement of the compatible original blade.
That provides a cleaner installation than attaching a large multi-fit adapter to the arm.
Potential advantages include:
- Cleaner appearance
- Fewer adapter components
- Straightforward installation
- Secure OE-style connection
- Less bulky mounting point
This is particularly useful on modern European vehicles where the wiper-arm design is integrated closely with the blade.
Factory-Style Does Not Mean Genuine Audi
These should be described as:
factory-style aftermarket replacement wiper blades for compatible Audi vehicles.
They should not be described as:
- Genuine Audi wipers
- Audi Original Parts
- Genuine OEM Audi blades
- Factory Audi replacement parts
unless the manufacturer or seller provides documentation proving that status.
The blades are designed as aftermarket replacements for the original wiper system.
24-Inch Driver-Side Blade
The larger supplied blade measures:
24 inches
or approximately:
610mm.
For the specified applications, it is marketed as the driver-side blade.
The larger wiping area is intended to clear the driver’s primary field of vision.
20-Inch Passenger-Side Blade
The second blade measures:
20 inches
or approximately:
508mm.
It is marketed as the passenger-side blade for compatible applications.
The shorter blade helps maintain the intended windshield sweep while avoiding interference with surrounding trim and the opposite blade.
Why Audi Uses Different Wiper Lengths
Different driver and passenger blade lengths are normal.
Wiper dimensions are selected around factors including:
- Windshield curvature
- Wiper pivot location
- A-pillar clearance
- Cowl clearance
- Blade overlap
- Required viewing area
- Wiper linkage geometry
The difference between 24 and 20 inches is therefore intentional.
Do Not Substitute Different Blade Lengths
Installing a longer blade does not necessarily improve visibility.
An oversized replacement can cause:
- Blade collision
- A-pillar contact
- Cowl interference
- Windshield-trim contact
- Excessive blade overlap
A blade that is too short reduces the intended wiping area.
Use the dimensions specified for the vehicle.
Audi A4 Wiper Replacement
The supplied fitment identifies select:
2009–2024 Audi A4
applications.
Because this represents several generations and configurations of the A4, buyers should confirm the exact vehicle rather than assuming every A4 in that period shares the same attachment.
Check:
year + model + body style + wiper-arm connection
before ordering.
Audi S4 Wiper Replacement
The listing also identifies select:
2009–2024 Audi S4
applications.
As with the A4, inspect the existing arm connection and confirm vehicle-specific compatibility.
Do not assume compatibility simply because A4 and S4 vehicles share portions of their platforms.
Audi A5 Wiper Replacement
The supplied application range includes select:
2010–2024 Audi A5
vehicles.
The A5 family spans multiple generations and body configurations, making vehicle-specific verification especially important.
Audi S5 Wiper Replacement
According to the supplied listing, select:
2008–2024 Audi S5
applications may use this replacement configuration.
Confirm the exact model and connector before ordering.
Audi RS5 Wiper Replacement
The seller lists select:
2013–2024 Audi RS5
applications.
Because RS models can have application differences from their A- and S-series counterparts, fitment should be confirmed independently for the specific RS5.
Audi Q5 and SQ5 Wiper Replacement
The supplied listing identifies select:
2018–2024 Audi Q5 and SQ5
applications.
This set contains the two front windshield blades only.
Do not assume that a rear hatch wiper is included.
Audi Q3 Wiper Replacement
The supplied fitment includes select:
2019–2024 Audi Q3
applications.
Again, this is a front two-blade package.
If the Q3 also requires a rear wiper replacement, that blade must be selected separately unless specifically included in another package.
Audi Allroad Applications
The supplied product title also references Audi allroad fitment.
However, the provided description does not establish a sufficiently clear model-year range for the allroad application.
Rather than guessing, confirm the exact:
- Allroad model
- Model year
- Front blade dimensions
- Arm connection
before ordering.
Vehicle-Specific Pre-Mounted Adapter
One of this product’s more useful features is the pre-installed connection.
Instead of requiring the buyer to assemble several pieces of a universal adapter, the blade arrives configured for the intended OE-style attachment.
That can make installation:
- Faster
- Cleaner
- Less confusing
It also reduces the bulky appearance sometimes associated with multi-fit aftermarket adapters.
How to Replace the Audi Front Wiper Blades
Exact procedures vary by Audi model.
Many modern vehicles require the wiper arms to be placed into a service position before they can safely be lifted away from the windshield.
Once the arms are accessible, the general procedure is:
- Turn the vehicle off.
- Place the wipers in service position if required.
- Carefully lift the first arm.
- Release the original blade from its locking connection.
- Remove the old blade.
- Align the replacement blade with the arm.
- Push or slide it into the locking position.
- Verify that it is fully secured.
- Carefully lower the arm.
- Repeat for the opposite side.
- Exit service mode if applicable.
- Test the wipers.
Always follow the procedure specified for the actual Audi model.
Do Not Force the Adapter
If the new blade does not slide or lock into place normally:
stop.
Do not force it onto the wiper arm.
Difficulty installing the blade can indicate:
- Wrong connector
- Incorrect adapter
- Wrong vehicle application
- Blade installed backward
- Connector not correctly aligned
Forcing an incompatible adapter can damage both the blade and wiper arm.
Protect the Audi Windshield
Place a folded towel against the windshield while replacing each blade.
Once the old blade is removed, the exposed metal arm can snap against the glass.
Modern windshields can incorporate expensive components such as:
- Rain sensors
- Camera mounting areas
- Acoustic layers
- Heating elements
- Driver-assistance hardware
Protecting the glass during a five-minute wiper replacement is worth the effort.
Clean the Windshield Before Testing
Before operating the new blades, clean away:
- Dirt
- Bugs
- Road film
- Grease
- Tree sap
- Wax residue
- Silicone contamination
Contaminated glass can make new wipers:
- Streak
- Chatter
- Skip
- Smear
A dirty windshield is capable of making a perfectly good set of new blades look guilty of crimes it didn’t commit.
Test the New Blades
After installation:
- Apply windshield washer fluid.
- Operate the wipers at low speed.
- Verify smooth movement.
- Confirm both blades remain locked.
- Check the entire sweep.
- Make sure the blades do not collide.
- Test at higher speed.
Stop immediately if either blade contacts:
- The other blade
- A-pillar
- Cowl
- Windshield trim
Symptoms of Worn Audi Wiper Blades
Replacement may be necessary when the existing blades begin:
- Streaking
- Smearing
- Chattering
- Skipping
- Squeaking
- Leaving unwiped sections
- Lifting at highway speeds
Inspect the wiping edge for physical deterioration as well.
Inspect the Audi Wiper Arms
If new blades do not wipe correctly, inspect the arms before replacing the blades again.
Potential problems include:
- Bent arm
- Weak spring tension
- Corrosion
- Damaged connector
- Excessive play
A premium blade cannot compensate for inadequate arm pressure.
Check the Windshield Washer System
Wiper replacement is also a convenient time to check:
- Washer-fluid level
- Washer pump
- Spray nozzles
- Washer hoses
- Spray pattern
Correct washer-fluid coverage helps prevent the blades from dragging dry debris across the glass.
Who Should Buy This Audi 24/20 Wiper Set?
This package is intended for owners of compatible Audi vehicles requiring:
24-inch driver + 20-inch passenger front blades
with the supported:
factory-style locking wiper-arm connection.
It is particularly relevant for drivers seeking:
- A complete two-blade front set
- Audi-specific fitment
- Pre-mounted adapters
- Clean OE-style installation
- No bulky universal adapter
- Direct replacement of worn front blades
Who Should NOT Buy This Set?
Do not order this package if:
- Your Audi uses different blade lengths
- Your vehicle uses a U/J-hook arm
- The existing connector does not match
- Your specific year/model is not confirmed
- You need a rear wiper rather than front blades
The supplied listing explicitly warns that this set is:
NOT FOR U/J-HOOK WIPER ARMS.
Key Features
- 24-inch driver-side blade
- 20-inch passenger-side blade
- Two-blade front package
- Factory-style mounting system
- Pre-mounted vehicle-specific adapters
- No bulky universal adapter
- Select Audi A4/S4 fitment
- Select Audi A5/S5/RS5 fitment
- Select Audi Q3 fitment
- Select Audi Q5/SQ5 fitment
- Select allroad applications where verified
- Not designed for U/J-hook arms
- Seller-advertised 12-month service-life warranty
Important Fitment Warning
Before purchasing, verify:
Audi Model → Model Year → Body Configuration → Blade Size → Wiper-Arm Connection
The supplied fitment covers multiple Audi platforms and generations.
Do not rely solely on:
24″ + 20″
blade dimensions.
The correct locking connection is equally important.
Related Pro Street Guides
For more information about choosing the correct windshield-wiper design:
Best Windshield Wiper Blades for Clearer Drives
For additional guidance on checking vehicle-specific parts before ordering:
There are no reviews yet.