What’s in the box
- Front+Rear Complete Struts Shocks Assembly
🔁 Cross Reference Part Numbers
-
172205
-
172206
-
172207
-
172208
✅ Vehicle Fitment
Compatible with:
-
Toyota Camry Solara
-
Lexus ES330
⚠ Confirm engine (3.0L V6), trim, and suspension type before ordering.
Product description

What’s Included
-
(2) Front complete strut assemblies (coil springs pre-installed)
-
(2) Rear shock absorbers
Complete front assemblies save time and reduce installation risk.
Why Replace Struts & Shocks?
Worn suspension components can cause:
-
Excessive body roll
-
Front-end dive under braking
-
Clunking over bumps
-
Uneven tire wear
-
Poor highway stability
If it floats and leans, it’s overdue.
Some tips before installation:
1) In order to ensure the consistency of the shock absorber, it is best to choose the shock absorber to be replaced in pairs.
2) The bearing on the top of the shock absorber should be lubricated (grease), and the waterproof dust cover must be put in place to ensure that it is not damaged.
3) It is particularly difficult to remove the end nut of the telescopic tappet of the shock absorber (the spring must be fastened with an iron wire), and it is easier to install.
4) When installing the ball head (suspender) of the balance bar, press down with an iron rod to install it smoothly.


2004-2006 Camry Solara Complete Strut Assembly Key Features
🔧 Pre-Assembled Front Units
Spring, mount, and strut pre-installed for easier installation.
⚙ Gas-Charged Dampers
Improved damping control and ride stability.
🛠 Direct OEM-Style Fit
Engineered for factory mounting locations.
Ride & Handling Benefits
-
Restores factory ride height
-
Improves steering feel
-
Reduces braking dive
-
Enhances overall comfort
Fresh suspension makes these early-2000s Toyotas feel surprisingly refined again.
Fitment:
Compatible with 2004 – 2006 ES330 Excludes Models With Adaptive Variable Suspension
Compatible with 2004 – 2006 Solara Vehicle Production Date Up To 06/2006
Compatible with 2004 – 2006 Camry Excludes Se Models
Specification:
OEM Part Number:
11712,55S11712,188205,G57077, SR4142,1332367R, 9214-0123,172205,869340,D172205,55S11711,182206,G57076,SR4143,1332367L,9214-0124,172206,869339,D172206,15352,55S15352,182207,G57079,SR4085,1332360R,9214-0136,172207,869338,DG46319, 15351,55S15351,182208,G57078,SR4086,1332360L,9214-0137,172208,869337,DG46320
Location:
Front+Rear Left and Right Side

High Quality Oil
Through physical and chemical analysis and comparison, and experimental comparison, MOSTPLUS oil is superior to existing oils in terms of high and low temperature kinematic viscosity, anti-foaming properties, and total acid value. In extreme cold, bad road conditions, high temperature and high humidity, the actual use of feedback information compared with various indicators are better than the existing oil.

High stiffness Coil spring
Laser flaw detection using oil-quenched alloy spring steel wire. Imported cold coil spring machine can ensure product consistency. The shot peening uses aisle type single entry in order, and the shot peening coverage rate is 100% and tempering improves the strength and service life of the spring.

High-grade durable Oil Seal
Inferior oil seals are likely to cause problems such as early oil leakage, air leakage, and short service life of abnormal noise. MOSTPLUS oil seals are used of high specifications and high quality to prevent the above problems.

High Strength Piston Rod
Inferior piston parts, iron plates are easy to rust, causing oil deterioration and valve rusting, causing premature failure of the product and unstable force value. MOSTPLUS High Strength Piston Rod use high quality material to make struts fully bear the elasticity and supply long life usage.

Inspections
Inspection to ensure the superior quality, electrophoretic-coated increase performance of anti-corrosion and anti-oxidation.

Test
Performance testing of spring and top glue
Stiffness and force value detection
Fatigue durability test (double action test equipment)

Package
Strong packaging with Corrugated Paper Avoiding Damages During Transporting.
2004-2006 Camry Solara Complete Strut Assembly Installation Notes
-
Replace in full sets for balanced handling
-
Alignment required after front strut installation
-
Inspect sway bar links and control arm bushings
-
Torque hardware to manufacturer specs
Skipping alignment? That’s how tires disappear early.
























Ree Mac –
Perfect fit!
brigido –
Muy buena las cosas y la entrega es confiable
Francis –
My car was in pretty bad condition when I first bought it. Bobbing up and down as soon as I hit a bump or some train tracks. Fishtailing all over the road. Put these on and we’re back in business baby.
Kindle Customer –
Bought these back in April, just put them in now. Now it is passed the return date and all 4 are not charged at all. They’re clunking worse than the old ones. Not happy …… , buy local to avoid return issues.
Larry Gonzales –
Installed these drove around all day they seem to ride perfectly, easy installation and the ride is smooth again. Will update review if any issue but so far perfect. 5 out of 5.
Duane –
First and foremost the struts fit my 2004 Solara. The replacement was fairly straightforward except for the rear top fastening. The fastening location is tricky and the alignment would be easier with 2 people. The new strutsade a big difference smoothing out the ride. Glad I made the purchase, should have done it sooner.
Cory Dorsey –
Would buy again. Very good product
phalen krotz –
Struts fit great. Work great. My car handles alot better. I’ve put about 200 miles on them so far.
Aaron –
Great quality, Fit my 06 lexus es330 perfect
Got these for my 06 lexus es330. Parts fit perfect, they look to be well built.