K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your vehicle and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty.
Compatible Vehicles:
- 2008-2013 INFINITI G37
- 2009-2020 NISSAN 370Z
From the manufacturer
💨 High-Flow Aluminum Intake Tubes – Smooth and Efficient Air Delivery
The twin mandrel-bent aluminum intake tubes are designed to provide a direct, unrestricted path for airflow into the engine. Finished in silver powder coat (TS – Titanium Silver), they not only resist heat soak but also add a clean, premium look to your engine bay.
Each tube is precisely tuned for the VQ37VHR’s dual-throttle-body setup, ensuring balanced airflow for both cylinder banks — maximizing efficiency, consistency, and power.
🧠 K&N Washable, Reusable High-Flow Air Filters
At the heart of the Nissan 370Z K&N Cold Air Intake are two of K&N’s legendary cotton gauze high-flow filters.
Unlike disposable paper filters, these are washable, reusable, and designed to last up to 100,000 miles between cleanings (under normal driving conditions).
They provide superior filtration while allowing up to 50% more airflow than the stock air filters — protecting your engine from harmful debris without sacrificing performance.
Simply clean, re-oil, and reinstall — no need to replace filters ever again.
🧩 Key Features of the Nissan 370Z K&N Cold Air Intake (69-7078TS):
-
Model: K&N 69-7078TS SP Series Cold Air Intake
-
Fitment: 2008–2020 Nissan 370Z / Infiniti G37 (VQ37VHR engine)
-
Finish: Titanium Silver (TS) Powder Coat
-
Material: Mandrel-Bent Aluminum Intake Tubes
-
Filters: Dual K&N High-Flow Washable Air Filters
-
Performance Gains: +14.5 HP / +13 lb-ft Torque (dyno-tested)
-
Design: Cold air system draws cooler air from outside the engine bay
-
Installation: Direct bolt-on with no tuning required
-
Maintenance: Reusable filters – clean every 100,000 miles (approx.)
-
Sound: Deep, sporty induction tone under throttle
🏎️ Improved Sound and Throttle Response
Once installed, the Nissan 370Z K&N Cold Air Intake 69-7078TS transforms not only how your engine performs but also how it sounds.
You’ll hear a deep induction growl under acceleration and a crisp, aggressive tone as the revs climb — all while maintaining OEM comfort at cruising speeds.
It’s the perfect combination of refined power and raw performance.
🔧 Simple Bolt-On Installation – No Tuning Required
K&N designed the 69-7078TS for an easy, straightforward installation. Everything you need is included in the box — from silicone couplers and clamps to detailed instructions.
Installation can be completed in about 90 minutes using standard hand tools, with no cutting, drilling, or ECU tuning required.
The result? A professional-grade upgrade that looks factory-installed but performs like a true aftermarket powerhouse.
🌟 Why Choose the Nissan 370Z K&N Cold Air Intake?
✅ Proven Performance: Dyno-tested horsepower and torque gains.
✅ Superior Filtration: Protects your engine while boosting airflow.
✅ No Tune Required: Works perfectly with stock ECU.
✅ Reusable Filters: Save money and reduce waste over time.
✅ Premium Design: Titanium Silver aluminum tubes for heat resistance and durability.
✅ Enhanced Sound: Deep, throaty tone that amplifies your 370Z’s performance feel.
✅ Lifetime Warranty: Backed by K&N’s limited million-mile warranty.
This system strikes the perfect balance between power, sound, and reliability, making it one of the best upgrades you can bolt onto your Nissan 370Z or Infiniti G37.
GUARANTEED TO INCREASE HORSEPOWER & TORQUE
K&N intakes undergo extensive testing on the dyno to ensure your vehicle will see an increase in performance. Every component is specially engineered to provide your vehicle with increased horsepower on your stock tune so you can enjoy the power gains without the hassles of ECU modifications.
PROVEN ENGINE PROTECTION
K&N air filters are tested in a state-of-the-art ISO 5011 filtration lab to help ensure premium engine protection for your vehicle. Used in every major form of motorsports for over 50 years, K&N filters have been proven to provide performance and protection in some of the harshest conditions possible.
PROTECTION FOR YOU AND YOUR ENGINE
K&N intakes and replacement air filters are built with durable materials that are made to last a lifetime so it’s the last filter or intake you will ever need to buy for your vehicle!
🏁 Conclusion: Give Your Z the Airflow Advantage It Deserves
The Nissan 370Z K&N Cold Air Intake 69-7078TS is a true performance upgrade — engineered to optimize airflow, boost horsepower, and deliver an exhilarating driving experience.
With its twin intake design, reusable high-flow filters, and dyno-proven power gains, it’s the ideal combination of innovation and performance heritage that K&N is known for.
If you’re serious about getting the most out of your Nissan 370Z or Infiniti G37, this is the intake system your engine’s been waiting for.
Breathe easier. Drive harder. Perform better — with the Nissan 370Z K&N Cold Air Intake.
Michael T. Polk –
Awesome kit, looks great, helped with HP a little and sounds really good to hear lil red breath deep. My son and i installed the kit, and for the most part went smoothly. I did get the wrong size filter for one side. That was a pain.
tektuuu –
High quality product. Instructions were pretty detailed throughout the entire install. No unique or special tools needed for anything. Detailed instructions a big plus on how to remove the Stock Intakes piece by piece and into installing the Typhoon kit. One thing that varied from the instructions was that the passenger side vent hose didn’t need the 7″ vent hose and I had to measure and cut that down to fit. Everything else was as specified in the directions. Took approximately 2.5 hours as I though I had misread or misplaced a part when the instructions indicated to install the 7″ vent hose. Checked on a pretty popular Z forum the370z.com and this issue was verified by others. I didn’t take it to have a Dyno done before or after but the car really feels that its gained some power and torque. Stock exhaust for now but considering AAM Short tails or an Fast Intentions – 12 res one. Definitely love the deep growl it gives and really hear the sound increase around 4k+ rpms. Amazon has the best price right now that I could find with my PRIME shipping! Great performance mod to start off and really easy to install. Since I can’t 4.5 Stars because of the slight confusion in the instructions it gets 5 Stars! Awesome Intake Kit for Price, Value and Ease of Install!
Ben –
Wish I could give this product zero stars. All the products on the market this is by far the worst one. Welds on the pipes were jagged. Inside of the pipes was not clean at all. The welds melted through. Nothing on the inside of the pipes was smooth. For a product that claims to get more air to your intake faster. There was a surprising amount of jagged edges and slag from the welds in there not being smooth for air to pass over. On top of all that the threads in the pipes were not clean so when the plastic adapters threaded in they immediately got cross threaded and snapped off. They also used a thread measure that was uncommon. Couldn’t even find a tap, to dig the plastic out and reset the threads, anywhere at shops around town. I put in an exorbet amount of time energy and money into making this setup work so I didn’t have to return it, but in the end I had to. I’ll never buy K&N again. Horrible product. Do your research. Intakes are simple and if you look into it there are a bunch of better quality products for a lot less money that perform exactly the same if not better.
Joe –
Very easy to install, take your time, be careful especially with the air sensors, as they are directional. But I didn’t use the 2 plastic 90° elbows, I bought 2. 1/4″ pipe plugs. And I also bought all the necessary pieces for a PCV delete, as I highly recommend you guys do the same, as now your new intakes kit will pull in allot more air, thus creating allot more vacuum, resulting in engine oil being pulled in through your pcv valves ( you have 2 – 1 on each valve cover ). You will need 2 size 8 AN fittings to thread in place of the removed PCV valves you should take out. And you will need 2 size 8 AN 90° elbows and 2 tiny air filters that will vent out atmospherically, 2 vacuum 1/4″ hose caps for the 2 ports on your intake planum as well as 2. 1/2″ vacuum hose caps- 1 each for either side of your valve covers for the port tube formed on top of the backside of each valve cover to plug all vacuum ports.Like I said very easy to do, there is instructions that are very discriptive and detailed. Another contributing factor as to why I bought this kit is for 2 reasons. 1.) K&N promised at least a 15hp gain. 2.) K&N promised also they will step up to the plate and go to bat for you if Nissan tries to negate your manufacturers warranty as long as their product is on your car, and there is a D.T.S codes relative to intake and air fuel mixture’s codes.Now as far as cool factor, This kit looks badass and makes the engine sound more aggressively. Good luck. Enjoy your car. Be safe. ** First photo is after I put in the PCV delete, and second photo was immediately after initial K&N install.**
kyle trombley –
First off let me start off by saying, I do enjoy the intake kit, and feel it was worth what I paid for it. My biggest gripe is the installation instructions. The hoses are too long, for the crankcase return, and every hose was cut at least I half. Now, this was for the 2015, 370z, maybe an 0 9 Infiniti is different, I don’t know, but you’ll see when you get in there.The second issue was, it has you take off everything at the same time, when it’ll be easier to do one side at a time, also take the cross brace off if you’re going at it alone. It’ll make your life easier.You also have to eliminate some things completely that the instructions leave out.All that said, I did notice better throttle response, and the around 30-50 miles more to my tank.. It also does give you some really nice sound (especially in the higher rpms) , compared to the stock kit. Not to mention, it looks bad @$$…I Def recommend.
Ahmad –
Give power, good sound and can be installed in home.
Installed this on 370z 2016The installation was (Mid-hard) it took around two hours, made the engine sounds higher especially at 4000RPM, i fillet a little jump in power. It may raise the temperature of the engine or in my case at least ,i notice a little bit more heat from my car.Good product, high quality, every thing You may need to install it is in the package.
MSquare –
Sounds amazing
Installation was bit difficult. But after Installation the car sounds and breaths better.The initial torque has increased.
Paul –
That noise!!! OMG!
What can I say about these intakes, it’s absolutely out of this world! The droning noise that comes with the standard 370Z is gone, and replaced by a noise that can only be described as magical! It makes it sound like a new car all together! Now for the important bit! When I read it gives you gains of 14HP I was probably going to accept that I’d not notice any difference … I was wrong! There is a very noticable throttle response and by god … now MY ‘Z’ feels so much quicker! When you get to about 3K+ RPM, you hear the thirsty intakes sucking in air, like a mini turbo … You need to buy them to find out. It changes the feel of the car, the sound of the car … omg! Worth every single penny!!!
Alex –
Easy install, great sound
Super easy to install and I am NO mechanic. Instructions were step by step and the throaty difference in the sound is incredible. I wish I could upload 2 videos to show you the before and after.. but I can only upload 1. So here it is. Worth every penny to go K&N
José –
Comentario
Fácil de instalar, tuve q usar algunas de las mangueras viejas porque las que trae no le quedaban bien