Godspeed MSS0440-A MonoSS Coilover Lowering Kit, Fully Adjustable, Ride Height, Spring Tension And 16 Click Damping, compatible with Honda Accord CT/CR) 2013-17

Key Features

The Godspeed MonoSS coilover system is engineered for drivers who want adjustable suspension performance without compromising daily drivability.

Specifications

• Part Number: MSS0440-A

• Product Line: MonoSS

• Vehicle Fitment: 2013–2017 Honda Accord (CT / CR chassis)

• Ride Height Adjustment: Yes

• Spring Preload Adjustment: Yes

• Damping Adjustment: 16 levels of damping control

• Shock Design: Mono-tube performance dampers

• Configuration: Full coilover suspension kit (front and rear)

This setup allows drivers to fine-tune ride comfort, handling stiffness, and vehicle stance.

Godspeed Project’s MonoSS is our one entity in our family of single-adjustable coilover suspension kits. These coilovers are designed to be a streetable race built coilover at an affordable price.

Performance Benefits

Upgrading to MonoSS coilovers offers several advantages over factory suspension components.

Benefits include

• Adjustable ride height for custom stance

• 16-click damping adjustment for suspension tuning

• Reduced body roll during cornering

• Improved steering response

• Better overall suspension control

Lowering the vehicle slightly also lowers the center of gravity, improving cornering performance and stability.

It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable).

Compatible Vehicle

The Godspeed MSS0440-A MonoSS Coilover Kit is designed for:

• Honda Accord

This includes many trims equipped with the factory suspension configuration.

Honda Accord MonoSS Coilovers Installation Overview

Installing coilovers replaces the factory shocks and springs with adjustable suspension assemblies.

Typical installation steps include:

1. Remove factory suspension components

2. Install Godspeed coilover assemblies

3. Adjust ride height and damping settings

4. Perform professional wheel alignment

An alignment is essential after installation to ensure correct suspension geometry and tire wear.

Because lowering a car without aligning it afterward is basically just volunteering to buy new tires early.

The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjustability which can be set to your preference.

Features:

• Front camber plates with pillow ball mount for camber adjustment
• 16 precise levels of damper adjustment
• Koyo Japan 6204z bearing
• Polyurethane bushing (if applicable)
• Monotube shock design
• Anodized shock body
• Lightweight aluminum lower mount and T7075 forged aluminum / carbon steel brackets
• 52mm carbon steel shock body with a performance internal piston
• Independent ride height and spring preload adjustments
• Race shock oil with a high viscosity index
• 1 Year Warranty from Date of Purchase

Prior to installation, verify all hardware and properly preload suspension to 10mm. Our technical department is available to answer any other questions.

Compatible With Honda Accord (CR/CT) 2013 2014 2015 2016 2017
Spring Rate (Front/Rear) : 8 kg/mm/6 kg/mm; Damping Levels: 16 Rebound Force Levels
52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke; Powder Coated CNC Machined Aluminum And Carbon Steel Accessories; Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Rebuild When Worn Out
Full 1 Year Limited Warranty From Date Of Purchase; Install By Experienced Professionals Is Highly Recommended

Why Choose Honda Accord MonoSS Coilovers?

Godspeed Project is known for producing performance suspension components designed for both street and track applications. Their MonoSS coilover line combines adjustable damping with durable monotube shock design, making it a popular choice for enthusiasts who want improved suspension performance without going full race setup.

Honda Accord MonoSS Coilovers Final Thoughts

The Godspeed MSS0440-A MonoSS Coilover Lowering Kit is a versatile suspension upgrade for the 2013–2017 Honda Accord. With adjustable ride height, spring preload, and 16 levels of damping control, it allows drivers to tailor their suspension setup for both comfort and performance.

For Accord owners looking to reduce wheel gap and improve handling, this coilover system provides a balanced upgrade that enhances both appearance and driving dynamics.