Skunk2 Pro Stance Camber Kit Key Features
The Skunk2 Pro Stance Series Camber Kit is engineered for durability, adjustability, and improved suspension performance.
Specifications
-
Part Number: 516-05-5770
-
Product Line: Pro Stance Series
-
Position: Front suspension
-
Adjustment Range: ±4 degrees camber
-
Ball Joint Cage: 6-degree tilted design for extended adjustment
-
Construction: High-strength forged aluminum arms
-
Mounting: Requires reuse of OEM mounting anchors
-
Set Includes: Two adjustable camber arms
The innovative ball joint cage geometry allows the camber kit to achieve greater adjustment range compared to standard camber arms.
If your car is one of the classic 90s Honda double-wishbone chassis, this camber kit will bolt right up. If it’s a 2001+ Civic (MacPherson strut)… then unfortunately the suspension design changed and this kit won’t fit.
Basically: great for EG/EK/Integra builds, useless for newer Civics. 😄
Powder-Coated finish for durability, Zinc- Plated components, Engineered cage angle reduction decreases stress on and increases life of the ball-joint. Mounting point moved inward to increase shock tower clearance.
Why Camber Adjustment Matters
When you lower a car with springs or coilovers, suspension geometry changes dramatically.
Without proper camber adjustment, you can experience:
-
Excessive negative camber
-
Uneven tire wear
-
Reduced traction during acceleration and braking
-
Unpredictable handling
The Skunk2 Pro Stance camber kit restores alignment adjustability so you can properly dial in suspension settings for both street and performance driving.
Decreases Stress On And Increases Life Of The Ball-Joint
Skunk2 Pro Stance Camber Kit Performance Benefits
Installing the Skunk2 Pro Stance Series Camber Kit provides several advantages for performance-oriented builds.
Benefits include
-
Wide camber adjustment range
-
Improved tire contact patch
-
Better cornering stability
-
Reduced tire wear
-
Increased suspension tuning capability
For enthusiasts building a lowered Honda or Acura, camber kits are one of the most essential suspension upgrades.
Mounting Point Moved Inward To Increase Shock Tower Clearance
Compatible Applications
The Skunk2 Pro Stance Series Front Camber Kit is commonly used on many Honda and Acura platforms, particularly vehicles with modified suspension setups.
Typical applications include:
-
Acura Integra
-
Honda Civic
-
Acura RSX
-
Other Honda/Acura double-wishbone suspension platforms
It is especially recommended for vehicles equipped with:
-
Lowering springs
-
Coilover suspension systems
-
Performance alignment setups
Powder-Coated Finish For Durability
Zinc-Plated Components
Installation involves replacing the factory upper control arms with the adjustable Skunk2 camber arms.
Basic process:
-
Remove factory upper control arms
-
Install Skunk2 camber kit using OEM mounting anchors
-
Adjust camber alignment
-
Perform professional alignment
Because eyeballing suspension alignment in your driveway is… not exactly engineering.
Why Skunk2 Racing?
Skunk2 Racing has long been one of the most trusted brands in the Honda and Acura performance aftermarket. Their suspension components are widely used in street builds, time attack cars, and track-focused performance setups.
The Pro Stance Series was developed specifically for enthusiasts who want a wide camber adjustment range while maintaining durability for aggressive driving conditions.
Skunk2 Pro Stance Camber Kit Final Thoughts
The Skunk2 Racing 516-05-5770 Pro Stance Series Front Camber Kit is an essential upgrade for lowered Honda and Acura vehicles. With ±4 degrees of camber adjustment and a 6-degree tilted ball joint cage, it provides the flexibility needed to correct alignment issues and fine-tune suspension performance.
For anyone serious about suspension setup, it’s one of those upgrades that makes a noticeable difference in both handling and tire longevity.
There are no reviews yet.