Efficient Class D Amplification with Infineon Technology
The AUDISHAKO MHD1600.1D uses Class D amplifier technology to provide high-output bass amplification in a relatively compact enclosure.
The integrated Infineon IR2184S gate driver controls switching devices within the amplifier’s output stage.
This design helps support efficient power conversion, making Class D amplification especially useful for dedicated automotive subwoofer systems.
With a manufacturer-advertised efficiency of up to 95%, the MHD1600.1D is designed to reduce energy losses compared with less efficient amplifier architectures.
Its aluminum chassis also assists with heat dissipation during extended listening sessions.
Adjustable Bass Controls for a Custom Sound
Variable Low-Pass Filter
The adjustable low-pass filter helps control the upper-frequency limit of your subwoofer’s output.
Correct crossover settings allow your subwoofer to blend more naturally with aftermarket door speakers and component speaker systems.
Adjustable Subsonic Filter
The subsonic filter helps limit extremely low frequencies that may cause unnecessary cone excursion, particularly in ported subwoofer enclosures.
Set this filter according to your enclosure design and subwoofer manufacturer’s recommendations.
Variable Bass Boost
Add emphasis to the low-frequency range with the amplifier’s adjustable bass boost.
Use bass boost conservatively to avoid clipping and unnecessary strain on your subwoofer.
Remote Bass Level Controller
The included wired remote lets you adjust the amplifier’s bass level without accessing the amplifier directly.
It’s a convenient addition for drivers who enjoy switching between different music genres or adjusting bass output while driving.
Upgrade Your Factory Stereo Without Replacing the Head Unit
One of the biggest advantages of the AUDISHAKO MHD1600.1D is its flexible input connectivity.
The amplifier includes both high-level speaker inputs and low-level RCA inputs, making it suitable for many different vehicle audio configurations.
Factory Stereo Installation: Connect through compatible high-level speaker outputs when your original radio does not have RCA preamp connections.
Aftermarket Head Unit Installation: Use RCA preamp outputs from compatible aftermarket stereos for a conventional amplifier connection.
Custom Audio Systems: Integrate the amplifier with compatible digital signal processors, line output converters, and upgraded speaker systems.
Some factory amplified stereos require additional integration hardware or signal processing to provide an appropriate input signal.
Compact Design for Custom Car Audio Installations
Measuring approximately 10.5 × 4.6 × 2 inches, the AUDISHAKO MHD1600.1D provides high-output amplification without requiring an oversized chassis.
Its compact design makes it suitable for many trunk-mounted amplifier racks, custom audio panels, and other properly ventilated installation locations.
The amplifier also features protection indicators to help identify operating faults.
AUDISHAKO MHD1600.1D Technical Specifications
| Specification | Details |
|---|---|
| Brand | AUDISHAKO |
| Model | MHD1600.1D |
| Amplifier Type | Monoblock Subwoofer Amplifier |
| Amplifier Class | Class D |
| Advertised Maximum Power | 3200W |
| RMS Power at 1 Ohm | 1600W × 1 |
| RMS Power at 2 Ohms | 800W × 1 |
| RMS Power at 4 Ohms | 400W × 1 |
| Supported Impedance | 1–4 Ohms |
| Gate Driver | Infineon IR2184S |
| Frequency Response | 10 Hz–250 Hz |
| Signal-to-Noise Ratio | Greater than 90 dB |
| Input Sensitivity | 0.25–8V |
| Efficiency | Up to 95% (advertised) |
| Input Connections | RCA and high-level |
| Low-Pass Filter | Adjustable |
| Subsonic Filter | Adjustable |
| Bass Boost | Adjustable |
| Remote Bass Controller | Included |
| Internal Fuses | 3 × 40A |
| Dimensions | 10.5 × 4.6 × 2.0 inches |
| Chassis | Aluminum |
What’s Included?
The AUDISHAKO MHD1600.1D amplifier package includes:
- AUDISHAKO MHD1600.1D monoblock amplifier
- Wired remote bass level controller and cable
- High-level input wiring harness
- Four mounting screws
- Three spare 40A fuses
- User manual
Power cables, ground cables, RCA interconnects, speaker wiring, and external circuit protection may need to be purchased separately.
Installation Recommendations for Maximum Performance
A properly installed subwoofer amplifier requires correctly sized electrical wiring, secure connections, and careful signal tuning.
Before installing the AUDISHAKO MHD1600.1D, verify your subwoofer’s voice coil configuration and final impedance.
Use an appropriately sized amplifier wiring kit with a battery-side fuse rated for the installed cable and electrical system. The amplifier’s three internal 40A fuses do not replace the need for battery-side circuit protection.
Ensure the amplifier has adequate ventilation and that its ground connection is secure.
For high-output installations, evaluate the condition and capacity of the vehicle’s battery, alternator, and charging system.
Finally, configure the low-pass crossover, subsonic filter, and amplifier gain to match your speakers and enclosure.
Why Choose the AUDISHAKO MHD1600.1D?
If you’re building a powerful aftermarket car audio system, the AUDISHAKO MHD1600.1D combines several desirable features in one compact amplifier.
Its 1-ohm stable design supports flexible subwoofer configurations, while adjustable sound controls allow you to customize bass reproduction.
The combination of Class D efficiency, high-level inputs, RCA connectivity, and remote bass adjustment makes this amplifier suitable for a variety of aftermarket and factory stereo upgrades.
Upgrade Your Car Audio with Pro Street Online
Whether you’re adding your first aftermarket subwoofer or upgrading an existing system, the AUDISHAKO MHD1600.1D 3200W Monoblock Class D Amplifier provides dedicated bass amplification and the tuning flexibility needed for a custom installation.
Discover more aftermarket amplifiers, car stereos, speakers, and installation accessories at Pro Street Online.
There are no reviews yet.