NVX VAD10004 V2 Power Ratings
| Configuration | Rated RMS Output |
|---|---|
| 4 Ohms, Four Channels | 150W × 4 |
| 2 Ohms, Four Channels | 250W × 4 |
| 4 Ohms, Two Channels Bridged | 500W × 2 |
| Advertised Peak Power | 2000W |
At 2 ohms, the amplifier’s four-channel ratings total 1000 watts RMS. Its two-channel bridged configuration also totals 1000 watts RMS at the specified 4-ohm loads.
The 2000-watt figure is a peak rating and should not be confused with continuous RMS output.
Use the Nissan Altima Stereo Wiring Diagram to help identify factory radio and speaker connections during an aftermarket audio installation.
Actual performance depends on supply voltage, speaker impedance, installation conditions, and the manufacturer’s test methodology.
Four-Channel Power for Aftermarket Car Speakers
The NVX VAD10004 V2 is a strong option for drivers installing upgraded front and rear speakers.
Upgrade Front Component Speakers
Power compatible high-performance component speaker systems with dedicated amplification.
With 150W RMS available per channel at 4 ohms, the VAD10004 V2 can support many demanding speaker configurations when properly matched and tuned.
Improve Rear Speaker Performance
Use the remaining channels to power compatible rear coaxial speakers or additional component speakers.
Build a Custom High-Output System
The amplifier’s adjustable crossovers make it suitable for custom speaker arrangements that require more control over frequency distribution.
For passive component speaker systems, retain the appropriate manufacturer-specified crossovers.
Bridgeable Design for Flexible Audio Installations
The NVX VAD10004 V2 can operate in a two-channel bridged configuration, providing up to 500W RMS per bridged channel at 4 ohms.
This allows installers to combine amplifier channels for compatible higher-power speaker or woofer applications.
Bridged operation requires the correct wiring configuration and minimum supported impedance.
Important: Do not connect a 2-ohm speaker load to a bridged channel unless NVX explicitly specifies support for that configuration. The provided bridged power rating is at 4 ohms.
Efficient Class D Amplification
The NVX VAD10004 V2 uses Class D amplifier technology to deliver substantial output while minimizing energy lost as heat.
This efficient architecture makes it particularly useful for vehicles with limited installation space or electrical capacity.
Compared with less efficient amplifier designs, Class D operation can reduce heat generation for a given output level.
The amplifier still requires proper ventilation, correct wiring, and sufficient electrical supply capacity.
Adjustable High-Pass and Low-Pass Crossovers
The VAD10004 V2 includes variable high-pass and low-pass crossover controls, each adjustable from 40 Hz to 500 Hz.
High-Pass Filter (HPF)
The high-pass filter helps prevent unnecessary low-frequency energy from reaching smaller speakers.
This can improve clarity and reduce excessive cone movement when a separate subwoofer handles deep bass.
Low-Pass Filter (LPF)
The low-pass filter limits higher frequencies sent to supported speaker configurations.
This is useful when integrating compatible woofers into a custom system.
Variable Bass Boost
The adjustable bass boost function provides additional low-frequency emphasis.
For clean audio performance, begin with bass boost disabled and increase it cautiously after properly setting amplifier gain.
Marine-Grade Circuit Board Protection
Unlike conventional car-only amplifiers, the NVX VAD10004 V2 features a conformally coated circuit board designed to help protect internal electronics from moisture-related exposure.
This makes the amplifier an option for appropriately protected installations in boats, UTVs, and other recreational vehicles.
Its marine-oriented construction also makes it useful for vehicles exposed to humidity and changing environmental conditions.
However, conformal circuit board coating does not mean the amplifier is waterproof or suitable for direct water exposure.
Install the amplifier in a protected location and follow NVX mounting and environmental guidelines.
Our Honda Civic Stereo Wiring Diagram is a useful reference for planning aftermarket head-unit and speaker installations.
Built-In Protection and Durable Construction
The NVX VAD10004 V2 includes three-way protection circuitry designed to respond to:
- Excessive amplifier temperature
- Electrical overload
- Speaker wiring short circuits
The amplifier also features a heavy-duty aluminum alloy heat sink to assist thermal management.
Platinum-plated RCA connections and screw-type terminals support secure audio signal and power connections.
NVX VAD10004 V2 Technical Specifications
| Specification | Details |
|---|---|
| Brand | NVX |
| Model | VAD10004 V2 |
| Amplifier Type | Four-Channel |
| Amplifier Class | Class D |
| Advertised Peak Power | 2000W |
| RMS Output at 4 Ohms | 150W × 4 |
| RMS Output at 2 Ohms | 250W × 4 |
| Bridged RMS Output at 4 Ohms | 500W × 2 |
| High-Pass Crossover | 40–500 Hz |
| Low-Pass Crossover | 40–500 Hz |
| Bass Boost | Variable |
| Circuit Board Protection | Marine-Grade Conformal Coating |
| Signal Inputs | Platinum-Plated RCA |
| Heat Sink | Aluminum Alloy |
| Wiring Connections | Screw-Type Terminals |
| Protection Circuitry | Thermal, Overload, Short Circuit |
| Status Indicators | LED |
| Applications | Car, Truck, Marine, UTV, Motorcycle |
Installation Tips for the NVX VAD10004 V2
Before installing your amplifier, verify your speakers’ RMS power ratings and nominal impedance.
Choose a secure mounting location that provides adequate ventilation and protection from direct moisture exposure.
Use appropriately sized power and ground cables based on the amplifier’s electrical requirements and the length of the cable run.
Install a properly rated fuse close to the power source to protect the amplifier’s supply cable.
Connect the amplifier to compatible RCA preamp outputs or a properly configured audio integration interface.
Verify speaker polarity and channel wiring before powering the system.
For full-range speaker installations, begin with conservative gain settings and configure the high-pass crossover according to your speakers’ specifications.
If using bridged operation, follow the manufacturer’s channel terminal diagram and maintain the required 4-ohm minimum bridged load.
Why Choose the NVX VAD10004 V2 Amplifier?
The NVX VAD10004 V2 combines high continuous RMS output, efficient Class D technology, bridgeable operation, and flexible crossover controls.
Its conformally coated circuit board adds versatility for protected marine and powersports installations, while its four-channel design supports demanding automotive speaker upgrades.
For enthusiasts looking to power high-performance speakers or build a custom amplified sound system, the VAD10004 V2 offers substantial output and useful tuning features.
Upgrade Your Car Audio with Pro Street Online
Get more performance from your aftermarket speakers with the NVX VAD10004 V2 2000W Peak 4-Channel Class D Amplifier.
Whether you’re building a high-output stereo system or upgrading factory speakers, this amplifier provides dedicated RMS power, adjustable sound tuning, and durable construction.
Explore aftermarket amplifiers, speakers, head units, and car audio installation accessories at Pro Street Online.
There are no reviews yet.